Nitecore HC33 LED Head Torch
Nitecore HC33 LED Head TorchNitecore HC33 LED Head TorchNitecore HC33 LED Head Torch
Nitecore HC33 LED Head TorchNitecore HC33 LED Head TorchNitecore HC33 LED Head Torch

Nitecore HC33 LED Head Torch

Availability:  6 in stock
Brand:  Nitecore
Product Code:  HC33

The new Nitecore HC33 is the most powerful head torch so far in the Nitecore range offering a jaw dropping output of 1800 lumens from a Cree XHP35 HD LED, making it a compact powerhouse. Due to the high output, the HC33 requires a rechargeable lithium-ion 18650 high drain battery like the Nitecore NL1835HP or a rechargeable lithium-ion IMR18650.


Laser Engraving:  
£61.95

The new Nitecore HC33 is the most powerful head torch so far in the Nitecore range offering a jaw dropping output of 1800 lumens from a Cree XHP35 HD LED, making it a compact powerhouse.

Due to the high output, the HC33 requires a rechargeable lithium-ion 18650 high drain battery like the Nitecore NL1835HP or a rechargeable lithium-ion IMR18650. Other lithium-ion 18650 batteries can be used, however they need to have a high discharge current of at least 8 A in order to work. The HC33 can also use two CR123A lithium metal non rechargeable batteries, however the turbo setting is unavailable if you are using CR123A batteries.

Featuring a 100° wide angle beam the HC33 will illuminate everything in your field of vision, making it perfect for tasks where seeing around you is essential, such as dog walking, tent building or caving.

The single push button turns the torch on and off by pressing and holding for 0.6 seconds, then once the torch is on a single press will cycle through the modes of Ultra-low, low, mid, high, turbo. Instant turbo from off is accessed by holding the button for 1.5 seconds and instant ultra-low from off is accessed by a single press.

Three special modes of strobe, SOS and location beacon are also available and are accessed by quickly double pressing the button from off and then cycled through with single presses.

The intelligent memory circuit will remember the last brightness setting used, apart from special modes, and will turn back on at that setting. The advanced temperature regulation module allows the HC33 to regulate its output and adapt to the ambient environment to maintain optimal performance.

A built-in battery voltage indicator will display battery voltage each time the battery is installed and the tail cap is tightened. For example if the voltage is 4.2 V, it will flash four times then pause and then flash two more times.

A pocket clip is included so that the head torch can be used stand alone without the headband and clipped to clothing. The magnetic tail cap also allows for hands free use.

Product Features

Can be rotated within silicon holder
Direct access to ultra low and turbo
Constant current circuit board
100° wide angle beam
Advanced temperature regulation technology
Reverse polarity protection protects from improper battery installation
Toughen ultra-clear mineral glass with anti-reflective coating
Comfortable chafe-free and breathable nylon headband
Magnetic base and tail stand capability

Operational Modes

Using 1 x IMR18650 lithium-ion 3100 mAh battery:
Turbo: 1800 lumens; 30 minutes run-time; 187 m beam range*
High: 780 lumens; 1 hour, 30 minutes run-time; 117 m beam range*
Mid: 240 lumens; 5 hours, 15 minutes run-time; 63 m beam range
Low: 70 lumens; 15 hours run-time; 35 m beam range
Ultra Low: 1 lumen; 300 hours run-time; 4 m beam range

Using 1 x Nitecore NL1835HP 18650 lithium-ion 3500 mAh battery:
Turbo: 1800 lumens; 30 minutes run-time; 187 m beam range*
High: 780 lumens; 1 hour, 45 minutes run-time; 117 m beam range*
Mid: 240 lumens; 5 hours, 45 minutes run-time; 63 m beam range
Low: 70 lumens; 16 hours, 30 minutes run-time; 35 m beam range
Ultra Low: 1 lumen; 330 hours run-time; 4 m beam range

Using 2 x CR123A 1700 mAh batteries (non-rechargeable):
High: 780 lumens; 1 hour, 15 minutes run-time; 117 m beam range*
Mid: 240 lumens; 4 hours run-time; 63 m beam range
Low: 70 lumens; 13 hours run-time; 35 m beam range
Ultra Low: 1 lumen; 200 hours run-time; 4 m beam range

Tested to ANSI / Nema FL 1 standard using Nitecore batteries, as shown above.

Please note: *Advanced temperature regulation technology allows the HC33 to dynamically adjust the output performance according to it's temperature to prevent damaged from over heating, therefore these run-times are based on a theoretical arithmetic.


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Product Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Professional LED head torch
Operating Modes: Ultra Low / Low / Mid / High / Turbo / Strobe / SOS / Location
Luminous Flux: Up to 1800 lumens
Lamp Type: 1 x Cree XHP35 HD LED
Beam Range: Up to 187 m
Beam angle: 100°
Batteries Required: 2 x CR123A lithium metal / 1 x IMR18650 lithium-ion / 1 x Nitecore NL1835HP (reccommended)
Run Time: Up to 330 hours (ultra-low setting)
Overall Length: 105.3 mm
Tail Diameter: 23.8 mm
Head Diameter: 25.5 x 24.2 mm
Weight: 51.2 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium construction
Body Finish: Type III hard anodised
Strap: Adjustable
Switch Type: Push button
Impact Resistance: 1.5 m
Environmental: Waterproof and dust resistant to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore HC33 torch x 1
Head band x 1
Spare O-ring x 2
Pocket clip x 1
Spare rubber switch boot x 1
Manual x 1

Nitecore 8 A High Discharge 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery

Nitecore 8 A High Discharge 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery

High Discharge Current of 8 A - For use with the Nitecore high drain torches

Availability:  4 in stock

The Nitecore NL1835HP is a rechargeable lithium-ion battery with a capacity of 3500 mAh, but unlike the other 18650 batteries in Nitecore's range, this model has a high continuous discharge current of 8 A.

[More details]
£19.95Add to Basket

Duracell Ultra CR123A 3 Volt Lithium Battery - Pack of 8

Duracell Ultra CR123A 3 Volt Lithium Battery - Pack of 8

Single Use: Primary lithium metal batteries are not rechargeable

Availability:  10+ in stock

When using lithium batteries, we believe it is best to only use the best quality brands. The Duracell Ultra CR123A is designed to deliver long run times in every device that it powers whether it is a torch, camera, or a high tech gadget.

[More details]
£19.95Add to Basket

Xtar ANT MC1 Plus Single Bay Lithium-ion Battery Charger

Xtar ANT MC1 Plus Single Bay Lithium-ion Battery Charger

Charges Li-ion/IMR/INR/ICR batteries

Availability:  10+ in stock

The Xtar ANT MC1 Plus is a lithium-ion battery charger with a single charging bay that has a charging current of either 0.5 A or 1 A. A small display screen will light up and show the charging current and the charging progress of the battery. The charger will automatically stop charging when the battery is full.

[More details]
£6.95RRP: £8.95Add to Basket

Nitecore F1 Flexbank Single Bay Li-ion Battery Charger

Nitecore F1 Flexbank Single Bay Li-ion Battery Charger

Features Power Bank Function - Charges Li-ion/IMR batteries

Availability:  9 in stock

FREE Micro USB charging cable supplied

The Nitecore F1 Flexbank is a lithium-ion battery charger with a single charging bay. It is suitable for charging 18650, 26650, 18490, 17500, 17335, 16430 (RCR123A), 14500 and 10440 lithium-ion/IMR type batteries by plugging one end of a USB charging cable into the micro USB port and the other end into a computer or wall adaptor.

[More details]
£11.95Add to Basket

Nitecore UM10 - Single Bay Charging System

Nitecore UM10 - Single Bay Charging System

Capable of charging Li-ion and IMR batteries

Availability:  6 in stock

The Nitecore UM10 is an advanced USB management and charging system capable of charging a single lithium-ion battery from a USB power source, while simultaneously charging an external device.

[More details]
£13.95Add to Basket

Nitecore Intellicharger i1 Single Bay  / Vapor Charger

Nitecore Intellicharger i1 Single Bay / Vapor Charger

Capable of charging Li-ion/IMR batteries and E-cigerettes

Availability:  4 in stock

The Nitecore i1 battery charger is new for 2015 and has a single charging bay suitable for charging Lithium-ion and IMR batteries. It also features a EGO port designed for charging E-cigarettes / vaporizers. Compatible with and identifies the following rechargeable batteries: Li-ion/IMR 26650, 18650, 18490, 17670, 17500, 17335, 16340 (RCR123), 14500 and 10440

[More details]
£19.95Add to Basket

Nitecore SC2 Dual Bay Li-ion/NiMH Charger

Nitecore SC2 Dual Bay Li-ion/NiMH Charger

Capable of independently charging two Li-ion/IMR/LiFePO4 or two NiMH batteries

Availability:  4 in stock

This Nitecore SC2 is a smart charger with high compatibility and quick charge technology. It can charge various rechargeable batteries in its two independent charging slots with up to a maximum of 3 A speed in one slot and 2 A speed in the other slot. The SC2 also offers two others charging current options of 0.5 A and 1 A.

[More details]
£33.95Add to Basket

Xtar VC2 Dual Bay Lithium-ion Battery Charger

Xtar VC2 Dual Bay Lithium-ion Battery Charger

For charging Lithium-ion type batteries only.

Availability:  10+ in stock

The Xtar VC2 is a lithium-ion battery charger with two charging bays. The VC2 is suitable for charging the following batteries 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650 lithium-ion type batteries. For charging 3.6 V or 3.7 V lithium-ion batteries only.

[More details]
£9.95RRP: £16.95Add to Basket

Be the first to Write a Review for this item!

There are currently no FAQ's for this product

This is a new website feature, so please use the form opposite if you do have any enquiries regarding the Nitecore HC33 LED Head Torch. This will help us generate a useful questions and answer section for each product.

Please complete the form below if you wish to ask us a question

 

*
Name
*
E-Mail
*
Message
*
Please add the two numbers

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive a Silverpoint Hunter XL120 LED Head Torch completely FREE!

The RRP of the Silverpoint Hunter XL120 LED Head Torch is £11.95

Free gift offer from Torch Direct Ltd
Customers Who Bought This Item Also Bought
Nitecore 8 A High Discharge 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery

Nitecore 8 A High Discharge 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery

High Discharge Current of 8 A - For use with the Nitecore high drain torches

Availability:  4 in stock

The Nitecore NL1835HP is a rechargeable lithium-ion battery with a capacity of 3500 mAh, but unlike the other 18650 batteries in Nitecore's range, this model has a high continuous discharge current of 8 A.

[More details]
£19.95Add to Basket

Nitecore UM10 - Single Bay Charging System

Nitecore UM10 - Single Bay Charging System

Capable of charging Li-ion and IMR batteries

Availability:  6 in stock

The Nitecore UM10 is an advanced USB management and charging system capable of charging a single lithium-ion battery from a USB power source, while simultaneously charging an external device.

[More details]
£13.95Add to Basket

Coast HL4 LED Head Torch

Coast HL4 LED Head Torch

145 Lumen Output With Dual Colour Feature

Availability:  4 in stock

The HL4 head torch has two different LED types; 1 x Red LED to preserve your night vision and keep animals from detecting you and 5 x White LED's for general high-powered illumination.

[More details]
£22.95RRP: £24.95Add to Basket