The Nitecore HA23 utilises a Cree XP-G2 S3 LED that provides a maximum of 250 lumens output in high mode.
Utilising a bead surface optic lens the HA23 provides a uniform and soft flood light, with a wide beam angle of 150° for excellent peripheral vision, allowing you to feel safer seeing your surroundings. The direction of the beam can be adjusted within a 70° angle using the hinged bracket.
Three brightness levels and beacon mode are available, and they are all controlled using the single side button. Fully pressing in the button will turn the light on and off, while half presses of the button with the light on will cycle through low, mid, high and beacon.
Powered by two AA alkaline or NiMH batteries, the HA23 has a run-time of up to 130 hours in low mode using NiMH batteries and has a beam range of up to 56 metres in the high mode.
The HA23 will regulate its output to avoid overheating and prolong the lifespan of the batteries when accessing the high level for over 10 minutes.
Light housing provides 70° vertical movement
High efficiency constant circuit provides stable output
Features Advanced Temperature Regulation technology
Textured lens with 150° angle flood beam
Comfortable chafe-free and breathable nylon headband
Using 2 x AA NiMH batteries:
High: 250 lumens; 3 hours, 30 minutes run-time; 56 m beam range
Med: 65 lumens; 17 hours run-time; 27 m beam range
Low: 2 lumens; 130 hours run-time; 4 m beam range
Beacon: 250 lumens
Using 2 x AA alkaline batteries:
High: 250 lumens; 1 hour, 30 minutes run-time; 56 m beam range
Med: 65 lumens; 10 hours run-time; 27 m beam range
Low: 2 lumens; 90 hours run-time; 4 m beam range
Beacon: 250 lumens
Tested to ANSI / NEMA FL1 standards under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
Important Battery and Battery Charger Information
Primary Cells - Please note that AA alkaline primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Professional LED head torch
Operating Modes: Low / Mid / High / Beacon
Luminous Flux: Up to 250 lumens
Lamp Type: 1 x Cree XP-G2 S3 LED
Beam Range: Up to 56 m
Beam Angle: Wide, 150°
Batteries Required: 2 x AA alkaline (included) or 2 x AA NiMH
Run Time: Up to 130 hours (low setting)
Measurements: 70.8 x 42.3 x 38 mm
Weight: 80 grams (excluding batteries)
Body Colour: Black
Body Material: Durable PC materials
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Dust resistant and Waterproof to IP67 standard
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore HA23 head torch x 1
AA alkaline battery x 2
Manual x 1