The Nitecore TINI SS is the stainless steel version of the TINI miniature key ring torch and has all the same features as the regular model, such as the built-in ultra thin flexible printed circuit, electroplated silver edging, daily mode and demo mode and ultra-low standby power draw (5uA), which allows it to be in standby for up to 1 year.
The TINI SS is available in three colours that all feature a stainless base but each have a different finish. The Tropical is coated with PVD Titanium offering a distinctive bright iridescent finish while the Jet Black is also coated with PVD Titanium but offers a low profile, elegant look. The Glacier is finished off with surface polishing for a simple yet stylish design.
A maximum output of 380 lumens is possible from the Cree XP-G2 S3 LED and the reflector has a beaded surface to provide soft and uniform lighting with a maximum beam range of 64 metres when in the momentary turbo mode.
The built-in 280 mAh lithium-ion battery is charged via a micro USB charging port (cable not included). Blue LED indicators built into the switch will blink slowly while charging is in progress and turn solid blue once charging is complete. A full charge takes approximately 1 hour, 45 minutes and the blue indicators will blink once every 3 seconds when the power is low to remind you to charge the TINI SS. A battery protection circuit is incorporated that provides over-discharge, over-charge and anti short circuiting protection.
The silver operational buttons are electroplated and comprise of a power button and a mode button. The power button turns the tip on by holding it down for 2 seconds and then the mode button cycles through low, mid and high with each press. A single press of the power button will turn the light off. Turbo is accessed with the light on or off by holding the mode button down and is a momentary function that will return to the previous state once the mode button is released.
The TINI SS also features either daily mode or demo mode. When in demo mode the light will only activate for 30 seconds if untouched, which is useful if you are quickly using the light to open a door or accidentally turn the light on without knowing. If you press the button again within 3 seconds of the light going out, the light will temporarily go into daily mode and stay on until you turn it off.
When in daily mode the light will stay on until you press the power button to turn the light off. To switch between daily and demo mode, simply hold both the power and mode buttons down at the same time until the light flashes once to indicate demo mode or twice to indicate daily mode.
Remaining battery power is indicated by pressing the mode switch while the Tip is turned off. the blue indicator will flash three times at +50% power, two times for below 50% power and one flash indicates the power is below 10%.
The advanced temperature regulation module allows the TINI SS to regulate its output and adapt to the ambient environment to maintain optimal performance.
An included carabiner key ring allows you to easily attach the TINI SS to your keys or a bag strap so that it is always on hand.
Built-in rechargeable lithium-ion battery
Integrated intelligent Li-ion battery charging circuit
Over-discharge, overcharge and short circuit protections
Dual switch design with direct access to turbo
Features four brightness levels
Advanced temperature regulation
Rear suspension ring for key ring attachment
Lightweight, compact and portable
Turbo: 380 lumens; 15 minutes run-time; 64 m beam range*
High: 145 lumens; 1 hour run-time; 40 m beam range
Mid: 38 lumens; 4 hours run-time; 19 m beam range
Low: 1 lumen; 60 hours run-time; 3.9 m beam range
Advanced temperature regulation dynamically adjusts output to prevent the LED from overheating, therefore these run-times are variable.
Note: *Turbo mode is a manually operated momentary function so therefore the run-time is based on a theoretical arithmetic.
Type: Key ring LED torch
Operating Modes: Turbo / High / Mid / Low
Luminous Flux: Up to 380 lumens
Beam Range: Up to 64 m
Lamp Type: Cree XP-G2 S3 LED
Batteries Required: Built-in 280 mAh lithium-ion battery
Run Time: Up to 60 hours on low
Measurements: 43.3 x 25.4 x 11.5 mm
Weight: 21.5 grams
Colours Available: Jet black, Glacier or Tropical
Body Material: Stainless steel
Environmental: Dust and water resistant to IP54 standard
Impact Resistance: 1 m
Warranty: 1 year
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore TINI SS LED key ring torch x 1
Key ring attachment x 1
Manual x 1