The Nitecore P20UV V2 replaces the popular P20UV with an upgraded 2nd gen strobe ready pedal design, a strengthened strike bezel, an internal anti impact mechanism and the addition of slots on the body for compatibility with the NTR10 tactical ring pro (not included).
As well as all that, the white LED has been updated to a Cree XP-L2 V6 with an output of 1000 lumens and four ultraviolet LEDs set into the reflector provide a 320 mW beam with a wavelength of 365 nm. Purpose built for authentication, forensics, identification applications, Smart Water and SelectaDNA the P20UV V2 is the ideal tool for Police, Security and Military personnel.
Designed for tactical applications, the crenellated strike bezel has strengthened tips with hard silicon nitride ceramics to enable excellent glass breaking performance. The upgraded 2nd generation Strobe Ready™ dual button interface has a strobe ready pedal design inset into the tail cap more to prevent accidental activation, while still enabling fast and easy access to the strobe in any mode even when wearing gloves, making it a perfect tactical torch with true single handed operation.
Three selectable modes of operation allow the user to define the user interface:
Tactical (Mode 1): Strobe / High / Ultraviolet
Law Enforcement (Mode 2): Strobe / High / Mid (180 lumens)/ Ultraviolet
Daily (Mode 3): Strobe / High / Mid (330 lumens) / Low / Ultraviolet
To change between the modes first ensure the P20 V2 is turned off and loosen head. Then hold down the Strobe Ready™ button while simultaneously tightening the head. The LED indicator on the tail will then indicate the selected mode by flashing once for tactical mode, twice for law enforcement mode and three times for daily mode.
The circular button turns the torch on/off with a full click, or half pressing the button will provide momentary illumination until the button is released. With the light off the strobe can be instantly accessed for momentary operation by holding down the Strobe Ready™ mode button and will turn off when the button is released. Strobe can be constantly accessed with the light on with a long press of the Strobe Ready™ mode button, and will revert back to the last used setting with a single press or off with the circular tail button.
When in mode 1 the torch will always turn on in high and a single press of the mode button will change between high and UV. In mode 2 the torch will always turn on in high, and single presses of the mode button will change between high, UV, mid. In mode 3, single presses of the mode button will cycle through low, mid, high, UV.
A built in LED on the tail cap switch indicates the remaining battery power when the battery is first inserted by flashing 3 times for above 50% power, twice for below 50% power and once to indicate the battery is near depletion.
The included NTH20 tactical holster is made from sturdy plastic that keeps the torch in place and allows for immediate quick draw when required without having to lift a flap up first, and provides a convenient way for carrying your torch as it has an adjustable stopper on the clip making it compatible with belts between 1.25 and 2.25 inches, in 0.25 inch increments. Also included is a stainless pocket clip for easy attachment to a pocket, back pack or molle vest.
Powered by a single 18650 lithium-ion rechargeable cell (recommended for the best run times) or two CR123A cells (not included).
Our UV products are at the safest end of the UV spectrum (UVA wavelength) however they should only be used by adults and responsible persons. Avoid skin exposure or eye contact. For more UV information please follow this link: https://en.wikipedia.org/wiki/Ultraviolet
White light and ultraviolet light output
Dual-switch tail cap designed for tactical use and easy application
Strike bezel with strengthened silicon nitride ceramic tips
Strobe ready™ button for quick access to Strobe mode
Three selectable modes brings flexibility in operation
Integrated LED on tail switch to indicate remaining battery power
Optical lenses with double sided anti-scratch coating
Anti-rolling design to provide a firm grip
Titanium coated stainless steel clip and NTH20 holster
High: 1000 lumens; 2 hours, 30 minutes run-time; 164 m beam range*
Mid (Mode 3): 330 lumens; 7 hours run-time; 94 m beam range
Mid (Mode 2): 180 lumens; 16 hours run-time; 69 m beam range
Low: 60 lumens; 46 hours run-time; 41 m beam range
UV: 320 mW; 27 hours run-time
Strobe: 1000 lumens
Tested to ANSI/PLATO FL1-2019 standards in laboratory conditions using a 18650 3500 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.
Please Note: * The P20UV V2 will automatically lower it's output to avoid overheating and prolong the lifespan of the battery when accessing the high level for over 2.5 minutes.
Type: Tactical hand held LED torch
Operating Modes: High / Mid / Low / Strobe / 365 nm UV
Luminous Flux: Up to 1000 lumens
Lamp Type: Primary: Cree XP-L2 V6 LED / Secondary: 4 x 365 nm UV LED's
Beam Range: Up to 164 m (white light)
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion
Overall Length: 151.2 mm
Head Diameter: 31.8 mm
Barrel Diameter: 25.4 mm
Tail Diameter: 26 mm
Weight: 133.5 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear mineral glass lens with anti-scratch coating
Switch Type: Dual switch end cap
Impact Resistance: 1.m
Environmental: Dust and water proof to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Nitecore P20UV V2 LED torch x 1
Pocket clip x 1
NTH20 holster x 1
Lanyard x 1
Spare O-ring x 1
CR123A battery magazine x 1
Manual x 1