The Nitecore P12GT is a compact, EDC torch that boasts a 1000 lumen output from a Cree XP-L HI V3 LED.
A combination of the Cree XP-L HI V3 LED, 'crystal coating technology' and 'precision digital optics technology' provides extreme reflector performance. All these features result in a concentrated beam that can throw as far as 367 metres from just a 1 inch head, which previously only a wider reflector would give such a throw.
Powered by either two CR123A non-rechargeable lithium batteries or one 18650 lithium-ion rechargeable battery, the P12GT has a run-time of up to 1 hour on high setting.
The advance temperature regulation (ATR) technology allows the P12GT to dynamically adjust output performance based on the internal temperature of the torch in order to protect the LED from overheating and prolong its working life.
The P12GT features a tail switch for momentary illumination and turns the light on and off. The side mode switch allows users to select the desired brightness level of ultra-low, low, mid or high as well as activating the strobe, SOS and beacon modes.
The mode switch also acts as a power indicator that will blink once every two seconds when battery level drops to 50% and blink rapidly when power levels are low (with the light switched on). With the light switched off pressing the side and tail switch simultaneously will display the battery voltage.
Thanks to the 1 inch diameter body, the P12GT is compatible with the 25.4 mm filters and diffusers, the weapon mount, bike mount and the Nitecore RSW1 Remote Switch. See the related panel to the right for the full range of accessories.
Side switch interface provides one-handed operation and easy access to all functions
Side switch features an indicator light which displays remaining battery power (patented)
Power indicator ’s secondary function displays battery voltage (accurate to 0.1 V)
Features advanced temperature regulation (ATR)
Intelligent memory function stores preferred brightness setting
High-efficiency regulation circuit provides unwavering output
Stainless steel titanium-plated clip included
Tail stand capability
Using 1 x Nitecore 18650 3400 mAh lithium-ion rechargeable battery:
High: 1000 lumens; 1 hour run-time*
Mid: 280 lumens; 5 hours, 15 minutes run-time
Low: 55 lumens; 28 hours run-time
Ultra Low: 1 lumen; 520 hours run-time
Using 2 x Nitecore CR123A lithium metal primary single-use batteries:
High: 1000 lumens; 45 minutes run-time*
Mid: 280 lumens; 3 hours, 30 minutes run-time
Low: 55 lumens; 20 hours run-time
Ultra Low: 1 lumen; 300 hours run-time
Note: *Advanced temperature regulation technology may adjust the lumen output if the torch becomes too hot, to prevent the LED from overheating.
Tested to ANSI/NEMA FL1 standards in laboratory conditions, the data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Hand held LED torch
Operating Modes: Ultra-low / Low / Mid / High / Strobe / SOS / Location Beacon
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XP-L HI V3 LED
Reflector System: Smooth
Beam Range: 367 m
Batteries Required: 2 x CR123A Lithium or 1 x 18650 lithium-ion
Run Time: Battery dependent, please see information above
Overall Length: 140 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Weight: 91 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear glass lens with anti-reflective coating
Switch Type: Tail switch and side mode button
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Nitecore P12GT LED torch x 1
Holster x 1
Lanyard x 1
Spare O-ring x 2
Tactical ring x 1
Spare rubber switch boot x 1
Pocket clip x 1
Battery (select from options above)
Manual x 1