The Nitecore P10GT has a maximum output of 900 lumens when using two CR123A non-rechargeable batteries or 820 lumens when using a 18650 lithium-ion rechargeable battery.
As with all the Nitecore GT models, the P10GT also features the Cree XP-L HI V3 LED with the domeless design that gives the torch a long, concentrated range with a maximum beam distance of 286 meters.
It Features a streamlined and ergonomic design in conjunction with Nitecore's Strobe ready™ switch, that allows for instant access to strobe mode, even when the torch is turned off. Dual switches make it easy to operate all of the modes and functions with a single hand.
Three selectable modes of operation allow the user to define the user interface:
Tactical Mode: Strobe / High
Law Enforcement Mode: Strobe / High / Low
General Mode: Strobe / High / Mid / Low
To change between the modes first ensure the P10GT is turned off and loosen head. Then hold down the Strobe Ready™ button while simultaneously tightening the head. The torch will then indicate the selected mode by flashing once for tactical mode, twice for law enforcement mode and three times for general mode.
With the light off or in tactical mode pressing the Strove Ready™ button will enter into strobe. In law enforcement mode and general mode pressing the Strobe Ready™ button will change the brightness level and holding down the Strobe Ready™ button will access the strobe. The tail clicky switch provides momentary illumination with a half press and full presses turn the torch on and off.
Once the desired operation mode has been set the P10GT's intelligent memory keeps this stored so you can be sure exactly how the light will behave in any given situation. A built in LED on the tail cap switch indicates the remaining battery voltage to ensure you know when the batteries are low on power.
Product Features
Dual-switch tail cap designed for tactical use and easy application
Strobe ready™ button for quick access to Strobe mode (patented)
Three selectable modes brings flexibility in operation
Integrated LEDs on tail switch to indicate remaining battery power (patented)
Anti-rolling design to provide a firm grip
Titanium steel clip included
Operational Modes
Using one Nitecore 3400 mAh lithium-ion rechargeable battery:
High: 820 lumens; 1 hours run-time*
Mid: 250 lumens; 8 hours, 30 minutes run-time
Low: 140 lumens; 11 hours, 45 minutes run-time (Law enforcement mode)
Low: 40 lumens; 17 hours run-time (General mode)
Using two Nitecore CR123A lithium metal primary single-use batteries:
High: 900 lumens; 45 minutes run-time*
Mid: 300 lumens; 2 hours, 15 minutes run-time
Low: 190 lumens; 3 hours, 15 minutes run-time (Law enforcement mode)
Low: 60 lumens; 9 hours, 45 minutes run-time (General mode)
Tested to ANSI/NEMA FL1 standards.
Note: *As this is a high drain device, when in high mode the P10GT will automatically reduce the output if the internal temperature becomes too high in order to protect the LED from overheating, therefore this is an accumulated run-time.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Technical Details
Type: Professional easy carry LED torch
Operating Modes: High / Mid / Low / Strobe
Luminous Flux: Up to 900 lumens
Lamp Type: Cree XP-L HI V3 LED
Beam Range: 286 m
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion (not included)
Run Time: Battery dependent, please see information above
Overall Length: 135 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Weight: 82 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear glass lens with anti-scratch coating
Switch Type: Dual switch
In-Built Technology: Constant current
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Nitecore P10GT LED torch x 1
Pocket clip x 1
Holster x 1
Lanyard x 1
Spare O-ring x 1
Tactical ring x 1
CR123A battery magazine x 1
Manual x 1