Nitecore P10 V2 LED Torch

Nitecore P10 V2 LED Torch
Nitecore P10 V2 LED TorchNitecore P10 V2 LED TorchNitecore P10 V2 LED TorchNitecore P10 V2 LED TorchNitecore P10 V2 LED TorchNitecore P10 V2 LED Torch
Item Code:  P10-V2

Status:  

(3 units)  

(3 units)

Nitecore
 
max allowance of 10 characters learn more
£59.95

The Nitecore P10 V2 upgrades the original, now with a Cree XP-L2 V6 LED that produces a maximum output of 1100 lumens when using two CR123A non-rechargeable batteries or 1000 lumens when using an 18650 lithium-ion rechargeable battery.

It also features the upgraded 2nd generation Strobe Ready™ dual button interface, that has a strobe ready pedal design inset into the tail cap more to prevent accidental activation, while still enabling fast and easy access to the strobe in any mode even when wearing gloves, making it a perfect tactical torch with true single handed operation.

Three selectable modes of operation allow the user to define the user interface:

Tactical (mode 1): Strobe / High
Law Enforcement (mode 2): Strobe / High / Mid (200 lumens)
Daily (mode 3): Strobe / High / Mid (370 lumens) / Low

To change between the modes first ensure the P10 V2 is turned off and loosen head. Then hold down the Strobe Ready™ button while simultaneously tightening the head. The LED indicator on the tail will then indicate the selected mode by flashing once for tactical mode, twice for law enforcement mode and three times for daily mode.

The circular button turns the torch on/off with a full click, or half pressing the button will provide momentary illumination until the button is released. With the light off the strobe can be instantly accessed for momentary operation by holding down the Strobe Ready™ mode button and will turn off when the button is released.

When in mode 1 the torch will always turn on in high and a single press of the mode button will change between high and strobe. In mode 2 the torch will always turn on in high, and single presses of the mode button will change between high / mid, and the strobe is accessed with a long press of the mode button. In mode 3 single presses of the mode button will cycle through low, mid, high and a long press will access the strobe. The last used setting in mode 3 will be memorised next time the torch is turned on.

A built in LED on the tail cap switch indicates the remaining battery power when the battery is first inserted by flashing 3 times for above 50% power, twice for below 50% power and once to indicate the battery is near depletion.

The included NTH10 tactical holster is made from sturdy plastic that keeps the torch in place and allows for immediate quick draw when required without having to lift a flap up first, and provides a convenient way for carrying your torch. Also included is a stainless pocket clip for easy attachment to a pocket, back pack or molle vest.

Product Features

Dual-switch tail cap designed for tactical use and easy application
Strobe ready™ button for quick access to Strobe mode
Three selectable modes brings flexibility in operation
Integrated LED on tail switch to indicate remaining battery power
Optical lenses with double sided anti-scratch coating
Anti-rolling design to provide a firm grip
Titanium coated stainless steel clip and NTH10 holster

Operational Modes

Using 1 x Nitecore 3500 mAh lithium-ion battery:
High: 1000 lumens; 3 hours run-time; 198 m beam range*
Mid (Mode 3): 370 lumens; 7 hours run-time; 115 m beam range*
Mid (Mode 2): 200 lumens; 18 hours run-time; 87 m beam range
Low: 60 lumens; 11 hours, 55 minutes run-time; 49 m beam range
Strobe: 1000 lumens

Using 2 x CR123A lithium metal (approx. 1700 mAh) batteries:
High: 1100 lumens; 1 hour run-time; 201 m beam range*
Mid (Mode 3): 370 lumens; 2 hours run-time; 115 m beam range*
Mid (Mode 2): 200 lumens; 3 hours run-time; 87 m beam range
Low: 60 lumens; 14 hours run-time; 49 m beam range
Strobe: 1100 lumens

Note: *As this is a high drain device, when in high or mid mode for over 2.5 minutes the P10 V2 will automatically to avoid overheating and prolong the lifespan of the battery, therefore this is an accumulated run-time.

Tested to ANSI/PLATO FL1-2019 standards in laboratory conditions. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Professional easy carry LED torch
Operating Modes: High / Mid / Low / Strobe
Luminous Flux: Up to 1100 lumens
Lamp Type: Cree XP-L2 V6 LED
Beam Range: Up to 201 m
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion (not included)
Overall Length: 148.3 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Tail Diameter: 26 mm
Weight: 95 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Dual tail switch
Impact Resistance: 1 m
Environmental: Dust and water proof to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in a retail box and contains:
Nitecore P10 V2 LED torch x 1
Pocket clip x 1
NTH10 holster x 1
Lanyard x 1
Spare O-ring x 1
CR123A battery magazine x 1
Manual x 1

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Energizer CR123A 3 V Lithium Battery (Pack of 2)

(38 units)  (38 units)

Due to shipping regulations these batteries can only be shipped to the Mainland UK, unless sent with a compatible torch & in no quantity higher than 4 individual cells.

[More details]
£4.95Add to Basket

Nitecore 18650 3.7 V, 2600 mAh Lithium-ion Protected Battery (NL1826)

Nitecore 18650 3.7 V, 2600 mAh Lithium-ion Protected Battery (NL1826)

(85 units)  (85 units)

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£9.95Add to Basket

Nitecore 3200 mAh 18650 Lithium-ion Protected Battery (NL1832)

Nitecore 3200 mAh 18650 Lithium-ion Protected Battery (NL1832)

(99 units)  (99 units)

The Nitecore NL1832 is a rechargeable 18650 lithium-ion battery with a capacity of 3200mAh, and replaces the Nitecore NL188 while still offering the same technical specifications.

[More details]
£15.95Add to Basket

Nitecore 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery (NL1835)

Nitecore 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery (NL1835)

(90 units)  (90 units)

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£19.95Add to Basket

Nitecore UI1 Single Bay Li-ion Battery Charger

Nitecore UI1 Single Bay Li-ion Battery Charger

(5 units)  (5 units)

The Nitecore UI1 is a lithium-ion and IMR battery charger with a single charging bay.

[More details]
£11.45Add to Basket

Nitecore UI2 Dual Bay Li-ion Battery Charger

Nitecore UI2 Dual Bay Li-ion Battery Charger

(6 units)  (6 units)

The Nitecore UI2 is a lithium-ion and IMR battery charger with a two independent charging bays.

[More details]
£17.45Add to Basket

Nitecore Intellicharger i1 Single Bay  / Vapor Charger

Nitecore Intellicharger i1 Single Bay / Vapor Charger

(4 units)  (4 units)

The Nitecore i1 battery charger is new for 2015 and has a single charging bay suitable for charging Lithium-ion and IMR batteries. It also features a EGO port designed for charging E-cigarettes / vaporizers. Compatible with and identifies the following rechargeable batteries: Li-ion/IMR 26650, 18650, 18490, 17670, 17500, 17335, 16340 (RCR123), 14500 and 10440

[More details]
£19.95Add to Basket

Nitecore RSW2D Remote Pressure Switch

Nitecore RSW2D Remote Pressure Switch

(2 units)  (2 units)

The Nitecore RSW2D remote pressure switch is designed for the Nitecore P12GTS, MH12GTS and MH25GTS, or Nitecore torches with a 26 mm tail diameter and a double layered tube.

[More details]
£33.95Add to Basket

Nitecore GM02 Gun Mount

Nitecore GM02 Gun Mount

(4 units)  (4 units)

The GM02 is machined to perfection from aircraft grade aluminum alloy and is hard anodised for durability. Compatible with the following Nitecore torches; The Precise series, the Chameleon series, SRT7, SRT6, MT2C, MT25, MT26, MT40, MH2C, MH25, MH27 and MH40. Also compatible with any torch barrels with 25.4 mm (1 inch) diameter.

[More details]
£15.95Add to Basket

Nitecore 25.4 mm Colour Filter

Nitecore 25.4 mm Colour Filter

(13 units)  (13 units)

These handy Nitecore filters are designed for the Nitecore EA1, EA2, EC1, EA11, EA21, EC1, EC11, EC20, EC21, EC23, MH1A, MH1C, MH2A, MH2C, MH10/V2/S, MH12/V2/S/GT, SRT3, SRT5, P05, P10/V2/GT, P12/GT, NEW P12, MT1U, MT2C, MT10A, MT10C, MT20A & MT20C or any torch with a head diameter of 25.4 mm.

[More details]
£4.35Add to Basket

Nitecore 25.4 mm Diffuser

Nitecore 25.4 mm Diffuser

(4 units)  (4 units)

The NDF25 diffuser is designed for the Nitecore EA1, EA2, EC1, EA11, EA21, EC1, EC11, EC20, EC21, EC23, MH1A, MH1C, MH2A, MH2C, MH10/V2/S, MH12/V2/S/GT, SRT3, SRT5, P05, P10/V2/GT, P12/GT, NEW P12, MT1U, MT2C, MT10A, MT10C, MT20A & MT20C.

[More details]
£3.95Add to Basket

Nitecore NBM40 18650 4 Cell Battery Holder

Nitecore NBM40 18650 4 Cell Battery Holder

(3 units)  (3 units)

Carrying and storing your 18650 lithium-ion batteries has never been easier with the Nitecore NBM40 battery holder. It can comfortably store four 18650 batteries, which are simply just pushed into the flexible storage holes. The environmentally friendly vapour-phase gum material makes it easy to get your batteries in and out of the carrier, yet it is also strong and durable.

[More details]
£6.95Add to Basket

Nitecore NTR10 Tactical Ring

Nitecore NTR10 Tactical Ring

(3 units)  (3 units)

The Nitecore NTR10 Tactical Ring Pro enables a unique and flexible way of carrying and operating your compatible torch.

[More details]
£10.95Add to Basket

Be the first to Write a Review for this item!


We would love to hear from you. So, if you have a query about a product, an order update or a business trade enquiry then please get in touch using our contact form.

Office Opening Hours:
Monday to Friday, 9 am to 5 pm

Telephone:
01623 858990

Office Address:
Torch Direct Limited
Nunn Brook Road, The County Estate
Huthwaite, Sutton in Ashfield
Nottinghamshire
NG17 2HU
United Kingdom


Delivery OptionFees & Details
Royal Mail 1st ClassFREE for orders over £30 or £1.95 for orders under £30
Royal Mail TrackedFREE for orders over £30 or £2.95 for orders under £30
For orders that consist only of lithium batteries. (Mainland UK Only)FREE for orders over £30 or £4.95 for orders under £30
For orders that partly consist of lithium batteriesFREE for orders over £30 or £4.95 for orders under £30
UPS (Mainland UK Only)£5.95 for for delivery within 24 to 48 hours (Excluding weekends)
Royal Mail Special Delivery (Next Working Day)From £6.95 to £14.95 depending upon the weight of the parcel
Royal Mail Saturday DeliveryFrom £8.95 to £19.95 depending upon the weight of the parcel

Latest Delivery Information

All services operating at normal timescales.

We dispatch all orders received by 3 pm on the same day. This applies from Monday to Friday only. Any order received after that time will be dispatched on the next working day. Please note: We do not dispatch on weekends or bank holidays.

If you place your order now, it will leave our warehouse on 2021.

Royal Mail 1st Class

This delivery method is only for small items that comply with Royal Mail's Large Letter format, therefore you will not see this as an option if the item is too big to travel via the Large Letter service.

Royal Mail Tracked

Delivery time for this method is 2 to 4 days on average. The parcel is tracked through the postal network from door to door. If no one is in to receive the package, it can be collected from your local Royal Mail office which will be identified on a card your postman will post though your door, or if you prefer, you can re-arrange delivery by calling the telephone number on the card.

UPS (Mainland UK only)

This delivery method is recommended if your order is required more urgently and will also be the default option if your order contains any lithium batteries that are not contained within equipment. The delivery time for this method is guaranteed 1 to 2 working days after dispatch. A signature will be required and if no one is in to receive and sign for the package you will receive a card from the driver with all the information that you need. Please note: Saturday & Sunday are not considered as working days by UPS.

Royal Mail Special Delivery

This delivery method is recommended if your order is urgent. Delivery is guaranteed during the next working day after dispatch. A signature will be required and if no one is in to receive the package, it can be collected from your local Royal Mail office which will be identified on a card your postman will post though your door, or if you prefer, you can re-arrange delivery by calling the telephone number on the card. The charge for this service is weight dependant and will be dynamically calcualated & displayed on the shopping basket page. Please note: This next day service is for Monday to Friday deliveries only.

Royal Mail Saturday Delivery

This delivery method is recommended if your order is required to be delivered on a Saturday. Delivery is guaranteed on Saturday. A signature will be required and if no one is in to receive the package, it can be collected from your local Royal Mail office which will be identified on a card your postman will post though your door, or if you prefer, you can re-arrange delivery by calling the telephone number on the card. The charge for this service is weight dependant and will be dynamically calcualated & displayed on the shopping basket page.

Non Mainland UK Delivery

You may see this option if your order partly or fully contains lithium batteries that are not contained within the item we are shipping. If your postcode is not part of the Mainland UK for postal purposes then we will determine the best way to send your item(s) and in some cases we may have to cancel the order or offer an alternative solution, this is because Royal Mail and couriers have strict rules regarding the transport of lithium batteries and in the case of couriers certain regions of the UK have increased shipping costs.

Further Information

Should you have any questions or require further information regarding any of the delivery options, please contact us.