The Nitecore MT22C utilises a Cree XP-L HD V6 LED and has a maximum output of 1000 lumens with 185 metres beam range.
It is powered by a single 18650 lithium-ion rechargeable battery, two CR123A non rechargeable batteries or two RCR123 lithium-ion rechargeable batteries. Multiple battery options are handy as you can have CR123A batteries as a back up if your rechargeable batteries run down and you aren't in a position to charge you batteries.
The tail switch provides momentary operation by half press and holding the button and turns the light on/off with a full press of the button. With the torch turned on, the brightness level is selected with the innovative rotary switch by turning it anti-clockwise to go from ultra low and gradually increase the brightness until the turbo level is reached. If you continue to rotate the switch past the turbo level the strobe mode will activate.
A holster, lanyard and stainless steel pocket clip are all included to provide you with a number of ways to carry your torch when not in use. The tactical tail switch is seated inside a U shape to provide tail stand capability and to also minimise the chance of accidental activation. The advanced temperature regulation module allows the MT22C to regulate its output and adapt to the ambient environment to maintain optimal performance.
The torch is compatible with the GM02 gun mount,the RSW1 pressure switch and th 25 mm coloured filters which can be found under the product accessories tab.
Tactical tail button and side rotary switch
Stainless steel pocket clip
Infinite variable brightness from 0.5 to 1000 lumens
High efficiency constant current circuit
Integrated full metal tactical ring
Tail stand capability
Advanced temperature regulation to prevent overheating
Turbo: 1000 lumens; 1 hour run-time; 185 m beam range
Ultra Low: 0.5 lumen; 500 hours run-time; 4 m beam range
Strobe: 1000 lumens
Please note: Advanced temperature regulation technology allows the MT22C to dynamically adjust the output performance according to it's temperature to prevent damaged from over heating. The turbo run-time is tested without the advanced temperature regulation, therefore results may vary between torch, battery and environment.
Tested to ANSI/NEMA FL1 standards using 1 x Nitecore 3500 mAh 18650 lithium-ion battery. The infinite brightness adjustment goes from 0.5 to 1000 lumens, therefore the run-time are provided for the lowest and highest outputs.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: hand held LED torch
Operating Modes: Infinite brightness Ultra Low - Turbo / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XP-L HD V6 LED
Beam Range: Up to 185 m
Batteries Required: 2 x CR123A lithium / 2 x RCR123A lithium-ion / 1 x 18650 lithium-ion
Run Time: See information above
Overall Length: 136 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Weight: 92 grams (excluding battery)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Tail button and side rotary switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:
Nitecore MT22C torch x 1
Holster x 1
Lanyard x 1
Spare O-ring x 2
Anti roll ring x 1
Pocket clip x 1
Manual x 1