Nitecore MT21C Angle Light LED Torch

The Nitecore MT21C utilises a Cree XP-L HD V6 LED and has a maximum output of 1000 lumens with 184 metres beam range.

As well as the standard hand held torch design, the MT21C also offers the option to be used as an angled work light. The top section of the head can be bent to a 90° angle, so that when the torch is attached to a pocket or belt with the included clip the lights shines forwards, which is useful for many professions or household tasks. The torch features a magnetic base so that it can easily be attached to a metal surfaces and also has a hanging hoop so that it can be suspended to provide a range of lighting options.

It is powered by a single 18650 lithium-ion rechargeable battery, two CR123A non rechargeable batteries or two RCR123 lithium-ion rechargeable batteries. Multiple battery options are handy as you can have CR123A batteries as a back up if your rechargeable batteries run down and you aren't in a position to charge you batteries.

The side switch turns the torch on in ultra-low by holding the button down for 0.5 seconds and then each press after that cycles through ultra-low, low, mid, high and turbo. Hold the button down to turn the torch off again. Turbo can be acessed directly by holding the button for 1.5 seconds from off and releasing for constant turbo, or holding for 2.5 seconds to acess momentary turbo which will stay on until you release the button.

Special modes are accessed by quickly pressing the button three times in any state. the light will come on in strobe and each press will cycle through strobe, beacon and SOS.

A voltage power indicator blue light is built into the switch and will display the voltage each time the button is pressed with the torch off. The light will flash to show the voltage, for example if the voltage is 4.2 V the light will flash four times, pause and then flash two more times.

A holster, lanyard and stainless steel pocket clip are all included to provide you with a number of ways to carry your torch when not in use. The advanced temperature regulation module allows the MT21C to regulate its output and adapt to the ambient environment to maintain optimal performance.

The torch is compatible with the GM02 gun mount and the RSW1 pressure switch, which can be found under the product accessories tab.

Product Features

Side switch controls all functions
Power indicator displays battery voltage
Advanced temperature regulation
Reverse polarity protection
Stainless steel pocket clip
Tail stand capability

Operational Modes

Turbo: 1000 lumens; 1 hour run-time; 310 m beam range; 184 m beam range*
High: 400 lumens; 3 hours, 45 minutes run-time; 122 m beam range
Mid: 190 lumens; 7 hours, 30 minutes run-time; 85 m beam range
Low: 50 lumens; 25 hours; 42 m beam range
Ultra Low: 1 lumen; 700 hours run-time; 6 m beam range
Strobe/beacon/SOS: 1000 lumens

Please note: *Advanced temperature regulation technology allows the MT21C to dynamically adjust the output performance according to it's temperature to prevent damaged from over heating. The turbo run-time is tested without the advanced temperature regulation, therefore results may vary between torch, battery and environment.

Tested to ANSI/NEMA FL1 standards using 1 x Nitecore 3500 mAh 18650 lithium-ion battery.

Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Product Accessories tab above to view compatible batteries and battery chargers.

Technical Details

Type: Professional hand held LED torch
Operating Modes: Ultra Low / Low / Mid / High / Turbo / Strobe / Beacon / SOS
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XP-L HD V6 LED
Beam Range: Up to 184 m
Batteries Required: 2 x CR123A lithium / 2 x RCR123A lithium-ion / 1 x 18650 lithium-ion
Run Time: See information above
Overall Length: 131 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Weight: 103.5 grams (excluding battery)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Side switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and contains:
Nitecore MT21C torch x 1
Holster x 1
Lanyard x 1
Spare O-ring x 2
Pocket clip x 1
Manual x 1

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive an Xtar LED Key Ring Torch completely FREE!