The Nitecore MH41 utilises a Cree XHP50 LED giving a whooping 2150 lumens maximum output.
Included are two free Nitecore 18650 2300 mAh lithium-ion rechargeable battery cells. They can be easily recharged by plugging the supplied UK mains adaptor lead into the charging port, with the batteries inside, and then turning the torch on and the power on at the mains. The blue indicator will blink to indicate charging is in progress.
Featuring a tail switch for momentary illumination and on/off functions, there is also + and - side mode switches that cycle through the modes in the order of ultra-low, low, mid, high and turbo when pressing the + button and in reverse order when pressing the - button.
Pressing the + and - simultaneously will enter into the specials modes, and allow you to cycle through strobe, SOS and beacon modes. Directly access turbo mode by holding the + button with the torch on, and directly access ultra-low by holding the - button with the torch on.
For ease of use the intelligent memory circuit will remember the last brightness setting or strobe mode used and a spring loaded impact absorption mechanism , designed for shooting, buffers recoil and keeps the light stable in all working conditions.
Five brightness levels and three special modes
Integrated indicator in side switch notifies battery power
Features advanced temperature regulation (ATR) technology
Intelligent memory function
Reverse polarity protection
Detachable pocket clip
Instant access to turbo / ultra-low output
Tail stand capability
Using 4 x Nitecore CR123A lithium metal primary single-use batteries:
Turbo: 2150 lumens; 30 minutes run-time
High: 1230 lumens; 1 hour, 45 minutes run-time
Mid: 580 lumens; 4 hours, 15 minutes run-time
Low: 90 lumen; 18 hours, 15 minutes run-time
Ultra-low: 1 lumen; 400 hours run-time
Using 2 x Nitecore 18650 3400 mAh lithium-ion rechargeable battery:
Turbo: 2150 lumens; 1 hour run-time
High: 1230 lumens; 2 hours, 30 minutes run-time
Mid: 580 lumens; 5 hours, 45 minutes run-time
Low: 90 lumen; 32 hours, 15 minutes run-time
Ultra-low: 1 lumen; 850 hours run-time
Note: Advanced temperature regulation technology allows the MH41 to dynamically adjust output performance according to its body temperature. This prevents damage from overheating and prolongs it's working life.
Tested to ANSI standards, the data is approximate and may vary between torches, batteries and environments.
Important Battery Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Please click on the Product Accessories tab above to view compatible batteries.
Type: Professional hand held LED torch
Operating Modes: Ultra-low / Mid / High / Turbo / Strobe / Location Beacon / SOS
Luminous Flux: Up to 2150 lumens
Lamp Type: Cree XHP50 LED
Focus: Fixed focus
Reflector System: Micro-textured for wide angle lighting
Beam Range: 495 m
Batteries Required: 2 x 18650 lithium-ion (included) or 4 x CR123A non-rechargeable
Run Time: Battery dependent, see information above
Overall Length: 250 mm
Head Diameter: 60 mm
Barrel Diameter: 25.4 mm
Weight: 321 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodised
Window: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: Tail cap switch and two front mode buttons
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MH41 LED torch x 1
Holster x 1
Lanyard x 1
Tactical ring x 1
Spare switch boot x 1
Spare O-ring x 2
Pocket clip x 1
UK mains adaptor x 1
18650 lithium-ion 2300 mAh rechargeable battery x 2
Manual x 1