The Nitecore MH20GT is a compact, rechargeable torch that has a maximum output of 1000 lumens and utlises a Cree XP-L HI V3 LED with the domeless design that gives the torch a long, concentrated range with a maximum beam distance of 362 meters.
Powered by a single rechargeable 18650 lithium-ion battery, the MH20GT has the ability to charge the battery inside the torch. Simply plug the supplied charging lead into the micro USB port and the other end into the computer, or with suitable adaptor it can be plugged into the mains or car charger. The blue indicator light will blink twice every 3 seconds to show charging is in progress and will go solid blue once charging is complete after approximately 6 hours.
Alternatively the MH20GT can be powered by two RCR123A lithium-ion cells or two CR123A non-rechargeable lithium cells, however these batteries types can NOT be charged within the torch.
Five brightness levels and three special modes are available, which are controlled using the single side switch. To turn the torch on / off simply fully press the switch until a click is heard, and once the torch is on half presses of the button will cycle through the modes in the order of ultra-low, low, mid, high and turbo.
Turbo can also be instantly accessed with the light on by half pressing and holding for over one second, or with the light off fully press and hold the button for over one second and if you half press for over one second with the light off you will get instant access to ultra-low mode.
Special modes are accessed with the light on by fully pressing and holding the button for over one second to activate the strobe, and then half presses will cycle through to SOS and beacon. To exit the special modes fully press the switch down to turn the light off. As there is no memory recall for special modes the light will come back on in the last used brightness output.
The MH20GT also features a power indicator light which can be activated to help find the torch in the dark by flashing once every three seconds. Simply half press once with the light off to turn the indicator on or off. Please note that this mode will gradually drain the battery over a 12 month period without use. If the torch is to be unused for a long period it is advised to slightly unscrew the head to cut off the power connection and prevent the battery draining from the residual power draw.
After the battery is first installed the power indicator will flash to notify the user of the battery voltage. For example if the battery is 4.2 V the blue light will flash four times, pause and then flash twice more.
Innovative single button offers access to five brightness levels and three special modes
Integrated power indicator notifies battery voltage (accurate to 0.1V)
Charging module with a micro USB port charges Li-ion batteries rapidly
Toughened ultra-clear mineral glass with anti-reflective coating
Features advanced temperature regulation (ATR) technology
Detachable two-way anti-rolling clip
Instant access to turbo / ultra-low output
Tail stand capability
Using 2 x Nitecore CR123A lithium metal primary single-use batteries:
Turbo: 1000 lumens; 45 minutes run-time
High: 410 lumens; 2 hours, 30 minutes run-time
Mid: 230 lumens; 4 hours, 30 minutes run-time
Low: 50 lumens; 14 hours, 15 minutes run-time
Ultra-low: 1 lumen; 340 hours run-time
Using 1 x Nitecore 18650 3400 mAh lithium-ion rechargeable battery:
Turbo: 1000 lumens; 1 hour run-time
High: 410 lumens; 3 hours run-time
Mid: 230 lumens; 6 hours, 45 minutes run-time
Low: 50 lumens; 22 hours run-time
Ultra-low: 1 lumen; 680 hours run-time
Tested to ANSI standards, the data is approximate and may vary between torches, batteries and environments.
Important Battery Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - We offer a FREE Nitecore 18650 (2600 mAh) lithium-ion rechargeable battery with this product, or you can upgrade to the 3200 mAh 18650 or the 3400 mAh 18650.
Please click on the Product Accessories tab above to view compatible battery alternatives.
Type: Everyday carry LED torch
Operating Modes: Ultra-low / Low / Mid / High / Turbo / Strobe / SOS / Beacon
Lamp Type: Cree XP-L HI V3 LED
Focus: Fixed focus
Reflector: Smooth aluminium
Beam Range: 362 m
Batteries Required: 2 x CR123A lithium / 1 x 18650 Li-ion / 2 x RCR123A Li-ion
Run Time: Up to 680 hours
Overall Length: 105 mm
Head Diameter: 31.8 mm
Barrel Diameter: 25.4 mm
Weight: 89 grams (excluding battery)
Colours Available: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodised
Switch Type: Single button front switch
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MH20GT LED torch x 1
Holster x 1
Lanyard x 1
Spare O-ring x 2
Pocket clip x 1
USB charging cable x 1
Manual x 1