Home > Nitecore > Hand Torches
The Nitecore EC22 utilises a Cree XP-L HD V6 LED and has a maximum output of 1000 lumens with 185 metres beam range. It is powered by a single 18650 lithium-ion rechargeable battery, two CR123A non rechargeable batteries or two RCR123 lithium-ion rechargeable batteries.
(Details shown apply to the default selection)
The Nitecore EC22 utilises a Cree XP-L HD V6 LED and has a maximum output of 1000 lumens with 185 metres beam range.
It is powered by a single 18650 lithium-ion rechargeable battery, two CR123A non rechargeable batteries or two RCR123 lithium-ion rechargeable batteries. Multiple battery options are handy as you can have CR123A batteries as a back up if your rechargeable batteries run down and you aren't in a position to charge you batteries.
The EC22 uses an innovative rotary switch design and is turned on by rotating the switch clockwise until a click is heard. It will come on at the lowest output of 0.5 lumens and the brightness is variable up to 1000 lumens, slowly increased by continuing to turn the switch clockwise. Turn the switch back anti-clockwise until a click is heard to turn the light off again.
A holster, lanyard and stainless steel pocket clip are all included to provide you with a number of ways to carry your torch when not in use. The tail end of the torch is flat to provide tail stand capability. The advanced temperature regulation module allows the EC22 to regulate its output and adapt to the ambient environment to maintain optimal performance.
The torch is compatible with the GM02 gun mount and the RSW1 pressure switch, which can be found under the product accessories tab.
Infinite variable brightness from 0.5 to 1000 lumensHigh efficiency constant current circuitReverse polarity protectionGold plated contacts to prevent oxidationTail stand capabilityAdvanced temperature regulation to prevent overheating
Turbo: 1000 lumens; 1 hour run-time; 185 m beam rangeUltra Low: 0.5 lumen; 500 hours run-time; 4 m beam range
Please note: Advanced temperature regulation technology allows the EC22 to dynamically adjust the output performance according to it's temperature to prevent damaged from over heating. The turbo run-time is tested without the advanced temperature regulation, therefore results may vary between torch, battery and environment.
Tested to ANSI/NEMA FL1 standards in laboratory conditions using 1 x Nitecore 18650 3500 mAh lithium-ion battery.
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Hand held LED torchOperating Modes: Infinitely variableLuminous Flux: Up to 1000 lumensLamp Type: Cree XP-L HD V6 LEDBeam Range: Up to 185 mBatteries Required: 2 x CR123A lithium / 2 x RCR123A lithium-ion / 1 x 18650 lithium-ionRun Time: Up to 500 hours at lowest settingOverall Length: 128 mmBody and Head Diameter: 25.4 mmWeight: 77.2 gramsBody Colour: BlackBody Material: Constructed from aerospace grade aluminium alloyBody Finish: HA III military grade hard anodisedSwitch Type: Side rotary switchImpact Resistance: 1 mEnvironmental: Waterproof to IPX8 standard (2 m)Warranty: 5 yearsRegulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:Nitecore EC22 torch x 1Holster x 1Lanyard x 1Pocket clip x 1Spare O-ring x 2Manual x 1
The Nitecore 18650 Li-ion 3.7 V, 2600 mAh protected rechargeable battery is ideal for many brands of torch on the market including Nitecore, Fenix, Xtar and Olight.
The Nitecore 18650 Li-ion 3.7 V, 3200 mAh protected rechargeable battery is ideal for many brands of torch on the market including Nitecore, Fenix, Xtar and Olight.
The Nitecore NL1835 is a rechargeable lithium-ion battery with a capacity of 3500 mAh, which is the highest capacity 18650 battery in Nitecore's range. The NL1835 has a range of safety features to ensure peace of mind when using and charging the battery.
The Nitecore RCR123A Li-ion 3.7 V, 650 mAh protected battery is ideal for many brands of torch on the market including Nitecore, Fenix, Xtar and Olight. Electronically protected against over charge and over discharge. Equivalent to ICR123 / RCR123 / LIR123A / 16340.
When using lithium batteries, we believe it is best to only use the best quality brands. The Duracell Ultra CR123A is designed to deliver long run times in every device that it powers whether it is a torch, camera, or a high tech gadget.
The Xtar ANT MC1 Plus is a lithium-ion battery charger with a single charging bay that has a charging current of either 0.5 A or 1 A. A small display screen will light up and show the charging current and the charging progress of the battery. The charger will automatically stop charging when the battery is full.
FREE Micro USB charging cable supplied
The Nitecore F1 Flexbank is a lithium-ion battery charger with a single charging bay. It is suitable for charging 18650, 26650, 18490, 17500, 17335, 16430 (RCR123A), 14500 and 10440 lithium-ion/IMR type batteries by plugging one end of a USB charging cable into the micro USB port and the other end into a computer or wall adaptor.
This new Nitecore i2 itellicharger is an update of the older i2 and now offers twice the charging speed with a maximum output of 1000 mA while one battery is charging or a maximum output of 500 mA per bay when two batteries are charging.
The Nitecore i1 battery charger is new for 2015 and has a single charging bay suitable for charging Lithium-ion and IMR batteries. It also features a EGO port designed for charging E-cigarettes / vaporizers. Compatible with and identifies the following rechargeable batteries: Li-ion/IMR 26650, 18650, 18490, 17670, 17500, 17335, 16340 (RCR123), 14500 and 10440
The Nitecore F2 flexible power bank is a lithium-ion battery charger with a two independent charging bays that can charger two batteries simultaneously. This model has the advantage of two USB port power outputs, so you can use the F2 as a power bank, enabling you to charge phones, MP3 players, etc. The output provided is up to 2000 mA when two batteries are inserted in the charging bays, and up to 1000 mA when one battery is inserted.
This Nitecore V2 is a smart charger with quick charge technology designed for charging Lithium-ion/IMR and NiMH batteries in your car. It can charge various rechargeable batteries in its two independent charging slots with up to a maximum of 6000 mA total output when two batteries are charging (3000 mA per slot).
This Nitecore SC2 is a smart charger with high compatibility and quick charge technology. It can charge various rechargeable batteries in its two independent charging slots with up to a maximum of 3 A speed in one slot and 2 A speed in the other slot. The SC2 also offers two others charging current options of 0.5 A and 1 A.
The Nitecore Digicharger D2EU, is a universal smart charger compatible with a wide range of rechargeable batteries. Four independent charging bays automatically detect Li-ion, IMR, NiMH and NiCd batteries, and through manual selection it is also capable of charging LiFePO4 batteries.
The Nitecore UM20 is an advanced USB management and charging system capable of charging two lithium-ion batteries from a USB power source, while simultaneously charging an external device. A high definition LCD displays real time charging status, accurate to 1%.
The Nitecore UM10 is an advanced USB management and charging system capable of charging a single lithium-ion battery from a USB power source, while simultaneously charging an external device.
The GM02 is machined to perfection from aircraft grade aluminum alloy and is hard anodised for durability. Compatible with the following Nitecore torches; The Precise series, the Chameleon series, SRT7, SRT6, MT2C, MT25, MT26, MT40, MH2C, MH25, MH27 and MH40. Also compatible with any torch barrels with 25.4 mm (1 inch) diameter.
The Nitecore remote pressure switch is designed for several torches from the Nitecore range and once connected, it allows the torch to be operated by using the pressure pad switch.
The BM02 Bike Mount is suitable for fitting a wide range of LED torches to your cycle handlebars, making further use of your Nitecore torch.
These handy Nitecore filters are designed for the Nitecore MT25 and MT26 and feature premium double-sided mineral coated glass lens with heat resistance and high light transmission.
The NDF25 diffuser is designed for the Nitecore EA1, EA2, EC1, EC2 or MT2C and it is made from PC2805 high-grade plastic. They can be fitted to any torch with a head diameter of 25.4 mm.
The NTW25 traffic wand is designed for the Nitecore EA1, EA2, EC1, EC2 or MT2C and it is made from PC2805 high-grade plastic. They can be fitted to any torch with a head diameter of 25.4mm.
Be the first to Write a Review for this item!
Receive a great FREE GIFT from Torch Direct
To qualify simply spend over £50 with us, on any one order, minus any delivery fees.You will then receive an Xtar LED Key Ring Torch completely FREE!
Please complete the form below if you have a trade enquiry
These key ring torches are fantastic, once you add one to your key ring, you will wonder how you ever lived without it. The casing is made of a tough polycarbonate, which can withstand a lot of day to day punishment.
The Fenix PD40R is a compact rechargeable torch, but don't let it's size fool you, as it boasts an amazing 3000 lumens output.
Sign up for our FREE Torch Direct newsletter and receive the latest news, product information and special offers!
Lines open from 9.00am until 5.00pm, Monday to Friday
We accept all major credit and debit cards securely
9.00am - 5.00pm, Monday to Friday
We accept all major credit and debit cards