Nitecore EA45S LED Torch
Nitecore EA45S LED TorchNitecore EA45S LED TorchNitecore EA45S LED Torch
Nitecore EA45S LED TorchNitecore EA45S LED TorchNitecore EA45S LED Torch

Nitecore EA45S LED Torch

Availability:  3 in stock
Brand:  Nitecore
Product Code:  NCEA45S
 
maximum allowance of 20 characters
£74.95
Save £3.00 (RRP £77.95)

Offering five brightness levels, the Nitecore EA45S has maximum output of 1000 lumens using a Cree XP-L HI V3 LED.

The die-cast body is manufactured using a casting method of injecting molten aluminium under high pressure into a mould cavity. This means no separate parts need to be welded or fastened together, ensuring the highest level of structural integrity with the head and the tube being an integral whole.

The unibody construction gives the EA45S excellent heat dissipation abilities and also makes it super lightweight considering it's overall size and length.

Designed for easy one handed operation, the EA45S features a dual side switch with an integrated power level indicator. Each time batteries are inserted, or the mode button is held while the torch is off, the power indicator light will blink to display remaining battery power. Above 50% it will blink three times, when the battery power reaches below 50%, the power indicator blinks twice. When power levels are low, the power indicator will blink once.

The power switch controls on/off, standby and gives instant access to ultra-low, while the mode button cycles through the brightness outputs, gives instant access to turbo and controls the three special modes. A double click of the mode switch from the off position will immediately enter strobe mode.

A combination of the Cree XP-L HI V3 LED, 'crystal coating technology' and 'precision digital optics technology' provides extreme reflector performance. All these features result in a beam that can throw as far as 402 metres from a compact reflector, which previously only a wider reflector would give such a throw.

Powered by four AA alkaline batteries or four AA NiMH rechargeable batteries.

Product Features

Thumbscrew lock on tailcap doubles as a tripod connector
High efficiency constant current circuit board
Integrated power indicator light displays remaining battery power (patented)
Features advanced temperature regulation technology
Reverse polarity protection to protect from improper battery installation
Instant access to ultra-low and turbo output
Stainless steel retaining ring protects core components from damage
Tail stand capability

Operational Modes

Turbo: 1000 lumens; 45 minutes run-time
High: 430 lumens; 2 hours, 45 minutes run-time
Mid: 210 lumens; 7 hours run-time
Low: 45 lumens; 35 hours run-time
Ultra-low: 1 lumens; 416 hours run-time

Note: Advanced temperature regulation technology allows the EA45S to dynamically adjust output performance according to its body temperature. This prevents damage from overheating and prolongs it's working life.

Tested to ANSI/NEMA FL1 standards in laboratory conditions using 4 x 1.2 V 2450 mAh AA NiMH batteries. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Important Battery and Battery Charger Information

Primary Cells - Please note that AA alkaline primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Product Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Professional hand held LED torch
Operating Modes: Turbo / High / Mid / Low / Ultra-low / Strobe / SOS / Location Beacon
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XP-L HI V3 LED
Reflector: Micro textured for wide angle lighting
Beam Range: 402 m
Batteries Required: 4 x AA alkaline or NiMH
Run Time: Up to 35 hours on low
Overall Length: 170 mm
Head Diameter: 34 mm
Barrel Diameter: 33.6 x 24.5 mm
Weight: 132.5 grams (excluding batteries)
Body Colour: Black
Body Material: Die-cast construction from aerospace grade aluminium alloy
Lens Type: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: Dual side switch
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in a retail box and contains:
Nitecore EA45S torch x 1
Lanyard x 1
Holster x 1
Batteries (see options above)
Manual x 1

Duracell Plus AA Alkaline Batteries (Pack of 4)

Duracell Plus AA Alkaline Batteries (Pack of 4)

Availability:  10+ in stock

Duracell Plus AA batteries are multi-purpose alkaline batteries with up to 50% more power*, ideal for reliably powering everyday devices that require a kick of additional power.

[More details]
£2.95Add to Basket

Duracell Rechargeable AA 2500 mAh NiMH Batteries

Duracell Rechargeable AA 2500 mAh NiMH Batteries

Availability:  10+ in stock

This pack of four AA NiMH batteries feature an ultra-high capacity of 2500 mAh, providing excellent high drain performance and fast charging capability.

[More details]
£9.95Add to Basket

Nitecore 34 mm Colour Filter

Nitecore 34 mm Colour Filter

Red / Green / Blue / White

Availability:  2 in stock

These handy Nitecore filters are designed for the Nitecore MT25 and MT26 and feature premium double-sided mineral coated glass lens with heat resistance and high light transmission.

[More details]
£5.05Add to Basket

Nitecore 34 mm Diffuser

Nitecore 34 mm Diffuser

Availability:  4 in stock

The NDF34 diffuser is designed for the Nitecore MT25 or MT26 and it is made from PC2805 high-grade plastic.

[More details]
£5.25Add to Basket

Nitecore 34 mm Traffic Wand

Nitecore 34 mm Traffic Wand

Availability:  5 in stock

The NTW34 traffic wand is designed for the Nitecore MT25 or MT26 and it is made from PC2805 high-grade plastic.

[More details]
£5.25RRP: £2.25Add to Basket

Storacell AA 12 Cell Battery Holder

Storacell AA 12 Cell Battery Holder

Availability:  10+ in stock

Organise and store your AA and 14500 batteries in this Storacell hard plastic caddy. These holders were originally designed for pilots, but they are also great for camping, boating, travel or at home.

[More details]
£5.95Add to Basket

Storacell Slimline AA 4 Cell Battery Holder

Storacell Slimline AA 4 Cell Battery Holder

Availability:  10+ in stock

Organise and store your AA and 14500 batteries in this Storacell hard plastic caddy. These holders were originally designed for pilots, but they are also great for camping, boating, travel or at home.

[More details]
£5.25Add to Basket

Silicon Thread Grease

Silicon Thread Grease

Availability:  3 in stock

Only use for torch maintenance and keep away from children

A pot of silicon grease for lubricating the threads on your torch, keeps the ingress protection (IP) rating of your torch intact.

[More details]
£3.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive an Xtar LED Key Ring Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £2.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Customers Who Bought This Item Also Bought
Ledlenser T7M LED Torch

Ledlenser T7M LED Torch

400 Lumens Output

Availability:  10+ in stock

The Ledlenser® T7M is the new, updated and renamed version of the popular MT7. It is a tactical lighting instrument with a unique glass-breaking tail cap designed for special law enforcement units, that can be used to defend yourself or for alerting emergency services with the SOS function. The Focus Lock™ system keeps the bezel from moving when holstering and unholstering throughout the day, a must for uniformed professionals.

[More details]
£54.95RRP: £76.95Add to Basket

Nitecore 34 mm Colour Filter

Nitecore 34 mm Colour Filter

Red / Green / Blue / White

Availability:  2 in stock

These handy Nitecore filters are designed for the Nitecore MT25 and MT26 and feature premium double-sided mineral coated glass lens with heat resistance and high light transmission.

[More details]
£5.05Add to Basket

Xtar LED Key Ring Torch

Xtar LED Key Ring Torch

Availability:  10+ in stock

These key ring torches are fantastic, once you add one to your key ring, you will wonder how you ever lived without it. The casing is made of a tough polycarbonate, which can withstand a lot of day to day punishment.

[More details]
£1.95Add to Basket

Coast A8R Rechargeable LED Torch

Coast A8R Rechargeable LED Torch

12 Lumen Output

Availability:  3 in stock

Weighing only 18 grams with the battery fitted, the slimline A8R LED torch will provide you with 12 lumens of light for up to 60 minutes with the included rechargeable lithium polymer battery.

[More details]
£35.95RRP: £39.95Add to Basket

Coast A9R Rechargeable LED Penlight

Coast A9R Rechargeable LED Penlight

Inspection Light

Availability:  6 in stock

Introducing Coast's stainless steel rechargeable penlight, the A9R. Weighing only 59 grams, with the battery fitted, this slimline torch will provide you with an inspection light for up to 3 hours with the included rechargeable lithium polymer battery.

[More details]
£45.95RRP: £49.95Add to Basket

Coast HP14 Plus LED Torch

Coast HP14 Plus LED Torch

629 Lumens Output

Availability:  5 in stock

The Coast HP14 high performance focusing LED torch uses a slightly larger casing than the HP7 which allows for the use of the world's most common battery, the AA. With a light output of 629 lumens, the Coast HP14 light has the brightness professionals are looking for.

[More details]
£64.95RRP: £69.95Add to Basket

Nitecore 34 mm Diffuser

Nitecore 34 mm Diffuser

Availability:  4 in stock

The NDF34 diffuser is designed for the Nitecore MT25 or MT26 and it is made from PC2805 high-grade plastic.

[More details]
£5.25Add to Basket

Silicon Thread Grease

Silicon Thread Grease

Availability:  3 in stock

Only use for torch maintenance and keep away from children

A pot of silicon grease for lubricating the threads on your torch, keeps the ingress protection (IP) rating of your torch intact.

[More details]
£3.95Add to Basket