The DL10 is the first diving light Nitecore have made and it will not disappoint.
It is designed specifically for underwater use as a diving torch and photography light, offering a maximum output of 1000 lumens from the Cree XP-L HI V3 LED.
Powered by two CR123A non rechargeable lithium metal batteries or one 18650 rechargeable lithium-ion battery (recommended), this 30 metre submersible torch provides low and high white outputs, low and high red outputs and a white strobe.
The white light can be turned on simultaneously with the red light which is supplementary for deep underwater photography, providing better colour rendition as red light is scarce in a deep water environment, resulting in photos that are true to colour.
To aid safety in underwater environments the DL10 comes supplied with a detachable pointer than screws into a socket on the front of the light. It helps avoid direct contact with dangerous objects or organisms and it can be used to knock on the oxygen tank of any companions you may have with you, to warn them of any danger if they are facing away from you.
The modes are easily selected with the two push buttons on the head of the torch. Long press the front button to turn on and off the white light and long press the back button to turn on and off the red light. Both white and red lights can be turned on at the same time. When the light is on single pressing the front button changes between high and low white light settings and single pressing the back button changes between high and low red light settings.
With the light on or off, press and hold both the front and back buttons to access the strobe setting. Press any button once to return to the previous status.
Maximum beam distance on land is only 45 metres as the DL10 features a super wide 110° angle beam for soft and uniform lighting, which is perfect for illuminating a photography subject.
The body is constructed using deepened thread for all-dimensional waterproofing and features double O-ring sealing to protect against water ingress so that it can be submerged up to a depth of 30 metres.
A diving wrist lanyard is included to safely keep your torch on your wrist while diving using the adjustable toggle and easily attaches to the large lanyard hole on the tail of the torch
Secondary red light for better underwater photography
Advanced temperature regulation
Reverse polarity protection
Toughened ultra clear mineral glass with anti-reflective coating
White High: 1000 lumens; 1 hour, 15 minutes run-time; 223 m beam range*
White Low: 385 lumens; 4 hours run-time; 148 m beam range
Red High: 115 lumens; 4 hours, 15 minutes run-time; 25 m beam range
Red Low: 55 lumens; 9 hours run-time; 18 m beam range
Strobe: 1000 lumens
Tested to ANSI/NEMA FL1 standard using a Nitecore 3400 mAh 18650 lithium-ion battery.
Note: The advanced temperature regulation may drop the output if the surface temperature becomes too hot, therefore the run-time is calculated based on a theoretical arithmetic.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Accessories tab above to view compatible batteries and battery chargers.
Type: Diving torch
Operating Modes: White High / White Low / Red High / Red Low / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: 1 x white Cree XP-L HI V3 LED and red LEDs
Beam Range: Up to 223 m
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion (recommended)
Overall Length: 133.1 mm
Head Diameter: 34 mm
Tail Diameter: 25.4 mm
Weight: 143.1 grams (excluding battery)
Body Colour: Black
Body Material: Premium Type III hard-anodised anti-abrasive finish
Switch Type: Dual push buttons
Environmental: Waterproof to IPX8 standard (30 m)
Warranty: 5 years free repair, limited life time warranty
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore DL10 LED diving torch x 1
Scuba diving pointer x 1
Lanyard x 1
Spare O-ring x 5 (4 for torch, 1 for pointer)
Manual x 1