The Tino is a two in one light and can be used with the white LED spotlight that has an output of 300 lumens, or to light up a wider area it can be used with the white COB LED floodlight offering a maximum output of 250 lumens.
Unlike a traditional hand torch, the light does not come from end end of the torch and instead comes from the side of the torch. It can easily be used in the hand, or when attached to a pocket with the included clip the light is perfectly pointing outwards from the body so it can be used hands free. The clip also doubles as a hanging hook that is nestled in the side of the pocket clip and can be folded out to use.
There is a strong magnet on the base of the torch and on the clip on the back of the torch, which is perfect for work on the car or in a workshop or attaching to other magnetic surfaces.
The torch is operated with the large push button located on the side of the torch and one press will access the spot, a second press will change to flood and the third press will turn it off. Both spot and flood outputs have a dimmable feature that is accessed by holding the button down while the torch is turned on in either mode and the brightness will gradually decrease until it reaches the lowest output and will then begin to increase again. It will flash to notify you once you are at the lowest and highest output.
Simply release the button once you reach your desired output, and the selected brightness will be recalled the next time the torch is turned on.
Featuring rugged plastic housing with a non-slip grip, the Tino is water resistant to IPX4 standards and is impact resistant to a height of 1 metre, ensuring protection for the LED components. It also features a floating design which allows the light to float if dropped into water enabling an easy recovery.
Powered by three AAA alkaline batteries.
Spot Light (100%): 300 lumens; 2 hours run-time; 135 m beam range
COB Flood Light (100%): 250 lumens; 3 hours run-time; 25 m beam range
Type: Hand-held/Work-light LED torch
Operating Modes: Spotlight / COB work light
Luminous Flux: Up to 300 lumens
Lamp: COB LED / Spot LED
Beam range: Up to 135 m
Batteries Required: 3 x AAA (included)
Measurements: 108 x 44 x 38 mm
Weight: 104 grams
Body Colour: Black
Switch Type: Push button
Impact Resistant: Up to 1 m
Environmental: Water resistant to IPX4 standards
Warranty: 2 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
NEBO Tino COB LED work light x 1
AAA alkaline battery x 3