Maglite ML300L 4 D Cell LED Torch
Maglite ML300L 4 D Cell LED TorchMaglite ML300L 4 D Cell LED TorchMaglite ML300L 4 D Cell LED TorchMaglite ML300L 4 D Cell LED Torch

Maglite ML300L 4 D Cell LED Torch

Brand:  Maglite
Product Code:  ML300L-S4015

Availability:  

13 in stock
 
max allowance of 20 characters
£99.95
Save £30.00 (RRP £129.95)

The Maglite ML300L 4 D cell torch has the same timeless design of the original 4 D torch, and has now been updated to 1002 lumens output on the highest setting using LED technology.

Powered by four D cell alkaline batteries, this fine instrument has a run-time of 5 hours, 45 minutes on high, which for it's output is fantastic. It is ideal light for night shifts such as security work, or just general regular use where you need a good sturdy torch.

Five different functions of high, low, strobe, eco and momentary are available and are split into four function sets to select from. Once the desired user mode is selected, the outputs can be cycled through using the side mounted QuickClik™ electronic switch.

The function sets are as follows;
#1 General:
High, Low, Eco
#2 Outdoor:
High, Low, Strobe
#3 Law Enforcement:
Momentary, High, Eco
#4 Tactical:
Momentary, High, Strobe

The torch will always come preset in function set #1 (general). To change to a different function set simply unscrew the tail cap until the torch no longer turns on, pause for two seconds and then hold down the switch. While still holding down the switch, tighten the tail cap until fully tight and the torch will start to blink after four seconds, the number of blinks indicates the function set. To select the desired set, wait until the torch has done the required amount of blinks (e.g. four blinks for function set #4 Tactical), and then release the switch.

Spot to focus beam is achievable with a quarter turn of the head. Versatile and reliable, Maglite will get the job done.

Operational Modes

High: 1002 lumens; 5 hours, 45 minutes run-time; 511 m beam range
Low: 97 hours run-time
Eco: 434 hours run-time


Technical Details

Type: Hand held LED torch
Operating Modes: High / Low / Eco / Momentary / Strobe
Luminous Flux: Up to 1002 lumens
Lamp: LED Chip
Focus: Twist action; spot to flood
Beam Range: Up to 511 m
Batteries Required: 4 x D cell alkaline (not included)
Length: 356.6 mm
Barrel Diameter: 38.1 mm
Head Diameter: 57 mm
Weight: 907 grams (including batteries)
Body Colour: Black
Body Material: Aircraft anodised aluminium alloy case
Electrical Contacts: Plated contacts to enhance conductivity and reduce oxidation
Switch Type: Side mounted quickclik electronic switch
Impact Resistance: 1 m
Environmental: Water resistant to IPX4 standards
Warranty: 10 years limited liability
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Maglite ML300L 4 D cell LED torch x 1
Manual x 1

Duracell Plus D Cell Alkaline Batteries (Pack of 2)

Duracell Plus D Cell Alkaline Batteries (Pack of 2)

1 in stock

Duracell Plus D batteries are multi-purpose alkaline batteries with up to 50% more power*, ideal for reliably powering everyday devices that require a kick of additional power.

[More details]
£3.75Add to Basket

Accessory Kit for Maglite D Cell Torches

Accessory Kit for Maglite D Cell Torches

18 in stock

A accessory kit to fit all Maglite D Cell torches.

[More details]
£12.95RRP: £14.95Add to Basket

Be the first to Write a Review for this item!

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd