Ledlenser Spares & Accessories

This cable is a Ledlenser spare or replacement USB magnetic contact charger cable suitable for use with the Ledlenser P7R.

Ledlenser replacement headband for the Ledlenser H7.2 and H7R.2 head torches. It includes one band that goes around the circumference of the head with clips attached to it so that you can secure the wires of the head torch.

Ledlenser replacement headband for the Ledlenser H14.2 and H14R.2 head torches. It includes one band that goes around the circumference of the head with clips attached to it so that you can secure the wires of the head torch and a strap that goes over the top of the head.

Ledlenser replacement headband for the Ledlenser H3, H5, H6, H6R, H7 (old version) and H7R (old version) head torches. It includes one band that goes around the circumference of the head and is adjustable once assembled on the head torch.

The Ledlenser SEO headband is the perfect replacement for the Ledlenser SEO 3, SEO 5 and SEO 7R, with the option to colour code with the head torch, or funk it up and mix & match the colours. The SEO headband also fits the SEO B3 and SEO B5R, so you can turn your bike light into a head torch simply by attaching the headband.

This Ledlenser filter set has four coloured filters comprised of red, green, blue and yellow.

This Ledlenser filter set is comprised of four coloured lens, each already assembled in their own rubber housing so you can easily take the filter on and off the head torches without having to swap the lens in and out of a single rubber holder.

This Ledlenser filter set is comprised of four coloured lens, each already assembled in their own rubber housing so you can easily take the filter on and off the MT10 without having to swap the lens in and out of a single rubber holder.

This Ledlenser filter set is comprised of four coloured lens, each already assembled in their own rubber housing so you can easily take the filter on and off the MT14 without having to swap the lens in and out of a single rubber holder.

This Ledlenser filter set is comprised of a red coloured lens that fits on the head of the Ledlenser MT18 and i18R and a roll protection ring that fits on the tail of the torch. Designed for the Ledlenser MT18 and i18R, this filter is also suitable for other torch models with a head diameter of 85.5 mm.

Bike mount designed for torches with a 25-29.5 mm body diameter only. Designed to fit the following Ledlenser torches: Police Tech Focus, Police Tech Focus FS, P7, P7.2, B7, T7, T7.2, M7, M8, MT7, T7M, M7R, M7RX, X7R, L5, L6, L7, L7E, E7, F1, V2 and V6.

Please Note: A torch is not included with this item

This Ledlenser bike mount is designed for torches with a 18-19 mm body diameter only. Designed to fit the following Ledlenser torches: M5, P5, P5.2, P5R, P5R.2, P6, P6.2, T5, T5.2, V2, V2 ALE and V2 Triplex.

Please Note: A torch is not included with this item

Bike mount designed for torches with a 25 mm body diameter only. Designed to fit the following Ledlenser torches: Police Tech Focus, L5, L6 and V2 Professional.

The Ledlenser gun mount is designed for use with torches and gun barrels that have a diameter of 25 - 34 mm.

The Ledlenser magnetic mount is designed for use with the Ledlenser MT10 and MT14. The mount is supplied with two sets of rubber inserts to prevent the torch getting scratched and so that the diameter is correct to hold the torch firmly in place.

The Ledlenser remote pressure switch is designed for use with the P7, P7.2, T7.2 or T7M and once connected, it allows the torch to be operated by using the pressure pad switch.

The Ledlenser remote pressure switch type D is designed for use with the Ledlenser MT10. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly.

The Ledlenser remote pressure switch type E is designed for use with the Ledlenser MT14. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly.

This Ledlenser pouch is designed for the Ledlenser H3, H3.2, H4, H4R, H5, H5.2, H6, iH6, H6R, iH6R, H7, H7.2, H7R, H7R.2, iH7R CRI, NEO4 and NEO6R head torches. It is made from a robust polyamide weave and provides a hard protective shell to prevent your head torch getting damaged when not in use.

The Ledlenser intelligent pouch not only securely holds and protects your torch, but also comes complete with four coloured filter lenses which can be used on the holster itself.

This Ledlenser black nylon torch holster is the perfect way to keep your torch protected and is designed for the Ledlenser Police Tactical Torch.

This Ledlenser black nylon torch holster is the perfect way to keep your torch protected and is designed for the Ledlenser M7R, M7RX and M8 LED torch.

Black nylon torch holster or pouch which is designed for the Ledlenser M14 LED torch.

Please Note: A torch is not included with this item

This Ledlenser black leather type A pouch is the perfect way to keep your torch protected and is designed for the Ledlenser MT10 LED torch. It has a belt loop on the back so you can easily carry your torch on your belt in style.

This Ledlenser black leather type B pouch is the perfect way to keep your torch protected and is designed for the Ledlenser MT14 LED torch. It has a belt loop on the back so you can easily carry your torch on your belt in style.

This Ledlenser black leather type C pouch is the perfect way to keep your torch protected and is designed for the Ledlenser MT6 LED torch. It has a belt loop on the back so you can easily carry your torch on your belt in style.

Ledlenser Intelligent Belt Clip, perfect for hands free torch usage. Four different sizes available, please see full product description to see which options are available.

Replacement or spare Ledlenser carrying strap for the X21, X21R, X21R.2 and X21.2 torches. It includes two rubber rings that slide onto the barrel of the torch, with one sitting just below the head the other on the tail end.

The Ledlenser GoPro adaptor type A is designed to mount a wide range of Ledlenser torches onto nearly all GoPro compatible systems and accessories. The top metal ring is where the torch is inserted and the adaptor comes with three rubber rings of different thickness to cater for different sized torches.

The Ledlenser GoPro adaptor type B is designed to mount the Ledlenser MT6 onto nearly all GoPro compatible systems and accessories. The top metal ring is where the torch is inserted and the adaptor comes with a rubber ring that fits round the MT6 to provide a perfect fit and keep the torch in place.

This handy Ledlenser tripod mount will allow you to attach your torch to most tripods, conveniently allowing the user to light an area for a long period of time hands free!

The Ledlenser mounting plate is designed to mount the Ledlenser i9R and i9R Iron to the wall or in a car.

The Ledlenser type A helmet mount is designed to attach the Ledlenser iL4 or EX4 to a helmet or hard hat and fits most helmets and hardhats up to 12 mm thickness.

This Ledlenser Type F intelligent belt clip is designed for the EX4 and iL4 ATEX torches. It is perfect for hands free torch usage, as well as carrying around when the torch isn't in use.

This Ledlenser roll protection set is designed for use with the Ledlenser X21, X21.2, X12R and X21R.2. It includes a large ring to fit the head of the torch and a small cap that fits overs the tail cap of the torch. The outer part of the rings have flat edges in intervals rather than a rounded edge.

Ledlenser extension cable for the H14R.2 and H14.2 head torches. This handy cable measures 1 metre in length and enables you to remove the battery pack from the headband and attach it to your belt, reducing the weight you carry on your head.

Ledlenser extension cable for the NEO6R head torch. This handy cable measures 1 metre in length and enables you to lengthen the cable between the head lamp and battery pack so that the battery pack can be removed from the headband and placed it in a pocket or backpack, thus reducing the weight carried on the head.

This Ledlenser reflective chest belt allows you to detach your Ledlenser NEO4, NEO6R, NEO10R, iSEO3, iSEO5R, SEO3, SEO5 or SEO7R from it's head band and be mounted onto your chest. Carrying your torch in this way reduces glare, especially when running in a group or doing group activities, provides a secure hold and means you don't have to carry the weight on your head.

This U-clip was designed with the police force in mind, allowing any torch with an approximate barrel diameter of 20-30 mm to clip securely onto their uniform. Perfect for use with the Ledlenser P7.2, P7 2018,  T7.2, Police TT, T7M, M7R and M7RX.

Ledlenser orange signal cone for most of their hand held torches. Please see full product description to see which options are available.

Ledlenser's yellow signal cone will transform your torch into a location beacon, making it easier to attract attention when needed. Useful for air traffic control, police, security or for an emergency.

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

This Ledlenser car charger adaptor is suitable for use with the Ledlenser XEO19R, X21R, X21R.2, P17R, MT18, iXEO19R, iLH8R, iL7R, i9R iron CRI, i9R iron, i9R, i18R, i17R, EXH8R and EX7R

This is a kit comprising of a mains charger and a USB charging cable and works with the following Ledlenser models: SEO 7R, H14R.2, also works with the SEO 3 and SEO 5 if they have been fitted with rechargeable batteries.

Please Note: This product is made by Mercury not Ledlenser.

This is a mains charger with a standard type 'A' USB output port. It features four interchangeable mains plugs, UK, EU, American and Australian, to suit all your traveling needs. Perfect for charging mobile phones and other USB devises.

This is a cable which has a USB cable with type A plug at one end and a micro type B five pin plug at the other end, the cable is 1.5 metres in length. Ideal for charging any devices that have a Micro USB port, such as a smart phone, tablet or many of our LED torches.

A set of 4 large helmet clips to fit on your head torch strap. These clips enable you to clip the head torch strap to your helmet and stop the straps slipping up the side of the helmet, a very useful item!

A set of four Unilite helmet clips to fit on your head torch strap. These clips enable you to clip the head torch strap to your helmet and stop the straps slipping up the side of the helmet, a very useful item!

The Ledlenser type B helmet mount is designed to attach the Ledlenser iL4 or EX4 to a helmet or hard hat, but allows it to be positioned higher up the helmet side that the type A attachment. It fits most helmets and hardhats up to 12 mm thickness.