iPROTEC Pro Tac Slyde LED Torch & Lantern
iPROTEC Pro Tac Slyde LED Torch & LanterniPROTEC Pro Tac Slyde LED Torch & LanterniPROTEC Pro Tac Slyde LED Torch & LanterniPROTEC Pro Tac Slyde LED Torch & LanterniPROTEC Pro Tac Slyde LED Torch & Lantern

iPROTEC Pro Tac Slyde LED Torch & Lantern

Availability:  Out of Stock
Brand:  iProtec
Product Code:  IP6746
maximum allowance of 20 characters

The iPROTEC Pro Tac Slyde is a multi-functional unit capable of being used as a torch or lantern.

The torch has a white LED with a convex lens that emits 300 lumens on high with a run-time of up to 2 hours, 30 minutes and a beam range of up to 135 metres. It offers 3 brightness settings, 2 flashing settings and also has 12x zoom which can be adjusted from flood to spot by sliding the head of the torch forward.

The lantern uses COB LED technology and offers two white brightness settings and also a red flashing setting which is useful for attracting attention. The lantern is revealed by sliding the head of the torch forward into full spot focus.

All the functions are controlled by a single button located on the tail of the torch which is glow in the dark and also has soft touch technology. A full press of the button turns the torch on and the modes can either be cycled through by turning the torch fully on and off again quickly, or the easiest way is to soft press the button half way when it is already turned on to cycle through the modes in the order of torch high, mid, low, strobe, SOS and then lantern high, low and flashing red. Continuing to half press will start back at the beginning again and keep cycling the modes and fully pressing the button in will turn the torch off.

The lantern lighting comes from one side of the body, which is useful when combined with the magnetic base, as you can stick it to a wall and the light would be facing downwards into your work area, or alternatively it can be stood up on a flat surface facing towards the desired area for hands free lighting also.

Powered by three AAA alkaline batteries and includes a lanyard for easy carrying.

Operational Modes

High: 300 lumens; 2 hours, 30 minutes run-time; 135 m beam range
Mid: 150 lumens; 6 hours run-time; 84 m beam range
Low: 30 lumens; 22 hours run-time; 40 m beam range
Strobe: 300 lumens; 6 hours run-time; 135 m beam range
SOS: 300 lumens; 48 hours run-time; 135 m beam range

High: 200 lumens; 3 hours run-time; 19 m beam range
Low: 100 lumens; 6 hours run-time; 13 m beam range
Red Flash: 20 lumens; 8 hours run-time; 6 m beam range

Technical Details

Type: LED torch and lantern
Operating Modes: High / Mid / Low / Strobe / SOS / Lantern High / Lantern Low / Red Flash
Luminous Flux: Up to 300 lumens
Beam Range: Up to 135 m (torch)
Lamp Type: 1 x white LED / C.O.B. LED
Batteries Required: 3 x AAA alkaline batteries
Run Time: See information above
Overall Length: 151 mm (180 mm extended)
Head Diameter: 35 mm
Barrel Diameter: 29 mm
Weight: 163 grams (including batteries)
Body Colour: Black
Material: Aircraft grade anodised aluminium
Impact Resistant: 1 m
Environmental: Water resistant
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and includes:
iPROTEC Pro Tac Slyde torch x 1
Lanyard x 1
AAA alkaline battery x 3
Manual x 1

Duracell Plus AAA Alkaline Batteries (Pack of 4)

Duracell Plus AAA Alkaline Batteries (Pack of 4)

Availability:  10+ in stock

Duracell Plus AAA batteries are multi-purpose alkaline batteries with up to 50% more power*, ideal for reliably powering everyday devices that require a kick of additional power.

[More details]
£2.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive an Xtar LED Key Ring Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £2.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.