The Unilite PS-IL10R has updated the popular PS-IL6R, now with an amazing 1000 lumens output from 27 Samsung SMD LEDs.
The 27 LEDs on the main body of the torch offer three brightness settings and emit widespread light thanks to the wide reflector, making it perfect for up close inspection work. There is also a single LED in the head of the torch to provide a concentrated beam with a longer throw and an output 250 lumens on the high spot setting.
The torch is operated with the dual rubberised buttons, with the bottom button controlling the main LEDs and the top button controlling the single torch LED. Each button cycles through high, mid and low with quick presses for the respective LEDs and if in any mode longer that 3 seconds the next press will turn the light off.
Utilising a built-in rechargeable 5000 mAh lithium-ion battery, the PS-IL10R provides a run-time of up to 3 hours on the highest setting and is easily charged back up using the supplied USB charging cable. Simply pop open the rubber dust cover on the back of the torch and insert the cable, then plug the USB end straight into a computer USB port, or into a USB mains/car adaptor. A red LED will illuminate to indicate that the unit is being charged and will go green when charging is complete. The charging time is approximately 6-7 hours.
Featuring multiple ways for hands free use, the PS-IL10R has a hanging hook, a fold out stand and a stong magnet - perfect for work under the bonnet.
Integral hanging hook and magnet for hands free use
Multi positional stand
Reflective body for greater visibility
Ultra strength aluminium and polycarbonate housing
High: 1000 lumens: 3 hours run-time; 64 m beam range
Mid: 500 lumens; 6 hours run-time; 32 m beam range
Low: 250 lumens; 12 hours run-time; 16 m beam range
High: 250 lumens: 8 hours run-time; 23 m beam range
Mid: 125 lumens; 16 hours run-time; 11 m beam range
Low: 62 lumens; 32 hours run-time; 6 m beam range
Operating Modes: High / Mid / Low (Main light) / High / Mid / Low (Torch light)
Luminous Flux: Up to 1000 lumens
Lamp: 27 x Samsung SMD LEDs / 1 x white LED
Focus: Area lighting
Beam Range: Up to 64 m
Batteries Required: 1 x built-in 3.7 V 5000 mAh lithium-ion rechargeable battery
Run Time: See information above
Charge Time: 6-7 hours
Body Material: High quality polycarbonate and aluminium
Measurements: 205 x 60 x 42 mm
Weight: 338 grams
Switch Type: Dual push buttons
In-Built Technology: High visibility technology
Impact Resistance: 1 m
Operating Temperature: -5°C to +40°C
Environmental: Water resistant to IP54 standards
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Unilite Prosafe PS-IL10R inspection light x 1
USB charging cable x 1
Manual x 1