The Ledlenser iH11R offers a maximum output of 1000 lumens white light from a single high powered LED on the boost setting and has a yellow body design that is the signature style of the industrial series range.
This model is the flagship head torch of the industrial series and is the first head torch in the series to offer bluetooth connectivity. This enables it to be controlled and personalised via a “Ledlenser Connect” app. This app, available on both iOS and Android, provides the ability for users to set up to six individual light profiles to suit needs, as well as set timer, interval and SOS signals or activate the integrated automatic dimming Opti-sense Technology. Users who like to read before bed can use the slow-dim function to turn the light off after a certain time - ideal for battery-saving use when camping.
The first press in the white light mode will access the optisense function where the output will automatically adjust between 100%-10% depending on how close you are to an object and then each press after that will cycle through the four white settings of low, mid, high, strobe and then off with each press. If in any setting for longer that 5 seconds, the next press will turn the head torch off. The boost mode is momentary and is turned on by double pressing the button within 5 seconds in any state. After 10 seconds the boost will revert back to the previous output or off if it was activated with the light off.
The iH11R also features a red, blue and green light which are useful for low level lighting, preserving the users night vision, animal spotting and map reading amongst other uses. Once in the RGB mode each press cycles through in the order of red light, green light and blue light.
To change between the app mode, white mode and RGB mode simply hold the button down from off and the light will then blink once for app mode, twice for white mode and three times for RGB mode.
When the light is first turned on, the battery indicator will display a green, yellow or red light for 2 seconds to show the charge status of the battery so that you know when it needs charging. If the battery is very low, the light will blink four times while in use. The light can be focused from a flood beam to a spot beam by twisting the focusing bezel outwards and the hinged bracket allows the iH11R to be swivelled up or down within a 120° angle so that you can position the light where you need it.
The iH11R is powered by the included 18650 3200 mAh lithium-ion battery which is charged inside the head lamp. To install or change the batteries the head lamp firstly needs to be removed from the bracket. The battery cover can then be popped open so that you can put in the rechargeable lithium-ion battery.
To charge the lithium-ion battery you need to connect the magnetic end of the included cable to the charging point on the underside of the head lamp and the standard USB at the other end plugs into a computer or compatible USB adaptor (not included). The battery indicator light will turn red to show charging is in progress and will go green once charging is complete.
To prevent accidental activation in transit the iH11R can be put into a lockout state by holding down the button for 5 seconds from off until either light blink four times rapidly. To unlock the torch hold the button down again for 5 seconds until the light first blink twice, followed by four blinks.
The headband can be used to wear the torch on the head or over a helmet and with the included extended mounting kit, the iH11R can also be mounted to a helmet in many ways.
The torch can be taken off the headband bracket and used independently, or hands free by attaching the magnetic mount which allows it to be attached to metal surfaces, or the additional strong square magnet can be attached to a helmet with the adhesive pad so that it can be magnetically helmet mounted. A standard bracket with an adhesive pad is also included, along with a mount that sits along the top of the helmet and clips in either side depending on the type of helmet used.
A great head torch for everyday use, activities such as climbing, camping and hiking and use in an industrial environment thanks to the high visibility and multiple mounting options. Also comes supplied with a nylon pouch for storage when not in use which also has a belt loop for easy carrying.
Operational Modes
Low: 10 lumens; 100 hours run-time; 30 m beam range
Mid: 300 lumens; 8 hours run-time; 200 m beam range
High: 750 lumens; 4 hours run-time; 300 m beam range
Boost: 1000 lumens; 320 m beam range*
Please Note: *The boost setting will activate for 10 seconds at a time before dropping back down to the previous level, therefore no constant run-time is available for this output.
Technical Details
Type: Focusing head torch
Operating Modes: Optisense / Low / Mid / High / Strobe / Boost / Red / Green / Blue
Luminous Flux: Up to 1000 lumens
Lamp: 1 x white LED / 1 x red LED / 1 x green LED / 1 x blue LED
Beam Range: Up to 320 m
Batteries Required: 1 x 18650 lithium-ion rechargeable battery (included)
Run Time: Up to 100 hours (low setting)
Weight: 179 g (including battery)
Body Colour: Black
Strap: Adjustable elastic
Switch Type: Push button switch
Environmental: Water resistant to IP54 standards
Warranty: 5 years head torch / 2 years battery
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Ledlenser iH11R LED head torch x 1
Ledlenser 3200 mAh 185650 lithium-ion battery x 1
Magnetic USB charging cable x 1
Nylon storage pouch x 1
Adhesive helmet mount x 1
Magnetic mount with adhesive magnet x 1
Rubber clip on mount x 1
Manual x 1