The LED Lenser MH2 offers a maximum output of 100 lumens white light from a single high powered LED and also has a single red side LED.
Red light is useful for low level lighting, preserving the users night vision and animal spotting. The white and red light can be switched between by holding the button down on the top of the torch for 2 seconds.
The white light cycles through the three settings of high, low, flash and then off with each press. When changed to the red light, each press cycles through red, red flash and then off. If in any setting for longer that 2 seconds, the next press will turn the head torch off.
The white light can also be focused from a spot beam to a flood beam by twisting the focusing bezel and the hinged bracket allows the MH2 to be tilted forwards by 45° so that you can angle the light down if need be.
A lock out function is also featured, which prevents accidental activation of the light when not in use. Simply hold the button down for 5 seconds and the red LED will flash once to indicate it is in lock out mode. To exit lock out mode, hold the button down again for another 5 seconds.
Powered by three AAA alkaline batteries, the MH2 has a run-time of up to 40 hours on the low setting (down to 1 lumen).
High: 100 lumens; 10 hours run-time; 100 m beam range
Low: 15 lumens; 40 hours run-time; 30 m beam range
Type: Focusing head torch
Operating Modes: Low / High / Flash / Red / Resh Flash
Luminous Flux: Up to 100 lumens
Lamp: 1 x white LED / 1 x red side LEDs
Beam Range: Up to 100 m
Batteries Required: 3 x AAA alkaline (included)
Run Time: Up to 40 hours (low setting)
Weight: 105 g (including batteries)
Body Colour: Black
Strap: Adjustable elastic
Switch Type: Push button switch
Environmental: Water resistant to IPX6 standards
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail pack and includes:
LED Lenser MH2 LED head torch x 1
Duracell AAA alkaline battery x 3
Manual x 1