The Ledlenser MH10 offers a maximum output of 600 lumens white light from a single Xtreme LED and also has a red light on the back of the head torch for increased viability.
Two coloured filter lens and the lens holder are included with the MH10. One is red, which is useful for low level lighting, preserving the users night vision and astronomy. The other is green which is good for hunting and map reading.
There are three lighting modes available giving the user a choice of how the brightness settings are cycled through. Mode 1 cycles through in the order of high, mid, low and off with each press. Mode 2 cycles through the settings in the opposite direction of low, mid, high and off. Mode 3 cycles between high and low, and unlike mode 1 & 2 which are energy saving (brightness gradually lowers for longer run-time), this mode offers constant current output to maintain a higher brightness for a shorter run-time.
Switching between modes is simple and is done by holding down the button while the torch is off. While holding the button the light will blink once to indicate mode 1 after 10 seconds, blink twice to indicate mode 2 after 13 seconds and blink 3 times to indicate mode 3 after 16 seconds.
The advanced focus system allows you to focus the light from spot to flood by twisting the bezel on the head of the torch. On the highest setting when focused into a spot, with a full charge, the MH10 can throw the beam up to 150 metres range.
The MH10 also features a lock out mode to prevent accidental activation when not in use and can be activated the same way as changing modes, except you hold the button for 16 seconds until the light blinks three times. To come out of lock out mode, hold the button for 5 seconds until the light blinks once.
Powered by an 18650 lithium-ion battery the MH10 has a run-time of 10 hours on the highest setting (down to 1 lumen) from a full charge. When the battery level drops to 10% or below, the built-in power indicator will notify you with three blinks of the white light.
The battery goes in a separate battery compartment that sits on the back on the headband, which helps to evenly distribute weight. The battery is also charged inside the battery holder via the micro USB port which is revealed by lifting the dust cover. Insert the included charging cable into the micro USB port and the other end into a computer or compatible USB adaptor (not included). A red light will come on to show charging is in progress and will go green once charging is complete.
A great head torch for everyday use and activities such as fishing, camping and hiking and includes a nylon pouch with a belt loop for easy carrying when not in use.
USB rechargable with included cable
Lock out function to prevent accidental activation
Red and green filter lens included
Nylon carry pouch
Features low battery indicator
High: 600 lumens; 10 hours run-time; 150 m beam range
Mid: 250 lumens: 15 hours run-time; 100 m beam range
Low: 10 lumens; 120 hours run-time; 15 m beam range
The above parameters are tested in lab conditions using the included 18650 3400 mAh lithium-ion battery with energy saving mode (down to 1 lumen) and data may vary between torch, batteries, environment and individual usage habits.
Type: Focusing head torch
Operating Modes: Low / Mid / High / Rear Red
Luminous Flux: Up to 600 lumens
Lamp: 1 x Xtreme white LED / 1 x red rear LED
Beam Range: Up to 150 m
Batteries Required: 1 x 18650 lithium-ion battery (included)
Run Time: Up to 120 hours (low setting)
Weight: 158 g (including battery)
Body Colour: Black
Strap: Adjustable elastic
Switch Type: Push button switch
Environmental: Water resistant to IPX4 standards
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail pack and includes:
Ledlenser MH10 LED head torch x 1
Ledlenser 3400 mAh 18650 lithium-ion battery x 1
Micro USB charging cable x 1
Red filter lens x 1
Green filter lens x 1
Filter lens holder x 1
Nylon pouch x 1
Manual x 1