The Fenix AER-03 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch.
The noiseless pressure pad measures 30 mm long and provides momentary operation of your torch by applying slight finger pressure, once pressure is released the torch turns off. A round switch activates constant illumination of your torch, great for night time navigation.
The modes can also be changed by turning the torch on with the round button and then pressing the pressure pad to cycle through the outputs, however functions vary depending on the model of torch being used.
If using the TK32 2016, while the torch is white constant on you can hold down the pressure pad to change to the coloured outputs and then cycle through them by pressing the pressure pad as you would for the white outputs. The last selected white output will be remembered next time the torch is turned on with the circular button, but coloured outputs are not remembered.
The pressure pad momentarily activates the strobe function when using the TK16 and when using the TK32 the pressure pad will activate the red output and can also cycle the coloured outputs if pressed in quick succession (if not pressed quickly enough it will just be the red light that comes on).
For the TK25 R&B, while it is set to the white LEDs pressing the circular switch will turn the light on and pressing the pressure pad will cycle through the brightness outputs and holding the pressure pad down will access strobe. With the light turned off the momentary pressure pad will access the strobe setting. When changed to the R&B LEDs the circular button turns the light on in red and pressing the pressure pad cycles through red high, red low and blue. With the light turned off the momentary pressure pad will access just the red output.
The switch pad features velcro on the back with two separate pieces of velcro that can be stuck down in a desired location (for example near where you thumb naturally sits when holding the gun) giving fast and convenient operation.
A superbly engineered accessory, finished in hard anodised aircraft aluminium with a coiled switch lead and durable remote which is rated for 100,000 cycles and is rated for 3 A continuous current.
Model Compatibility
Fits the following models: TK25 R&B, TK25 UV, TK16 and TK32 2015/2016 edition.
Technical Details
Tail Adaptor Size: 26.5 mm (diameter) x 32 mm (length)
Coiled Cable Length: 240 mm (coiled), 800 mm (stretched)
Tail Adaptor Material: T6 grade aluminium with type III hard anodising
Cable Material: PU material
Weight: 65 grams
Colour: Black
Environmental: Waterproof to IPX8 standard
Packaging and Contents
Supplied in retail packaging and includes:
Fenix AER-03 tactical remote pressure switch x 1