Fenix WT50R Rechargeable LED Search Light
Fenix WT50R Rechargeable LED Search LightFenix WT50R Rechargeable LED Search LightFenix WT50R Rechargeable LED Search Light
Fenix WT50R Rechargeable LED Search LightFenix WT50R Rechargeable LED Search LightFenix WT50R Rechargeable LED Search Light

Fenix WT50R Rechargeable LED Search Light

Brand:  Fenix
Product Code:  WT50R


1 in stock
max allowance of 20 characters

The Fenix WT50R is a multi purpose rechargeable searchlight that uses a 5200 mAh lithium-ion rechargeable battery and a USB Type-C charging port for faster and more efficient charging.

Utilising a Cree XHP70.2 N4 LED it offers a maximum output of 3200 lumens on turbo from the main head light and throws the beam up to 425 metres distance. A secondary Cree XP-G3 S4 CW LED is situated on the tail and provides an output of 500 lumens on high.

A built-in handle makes carrying the torch really easy as it provides a better, smaller area to grip than the large torch, and it means you can easily search areas with the main head light that provides high output plus a spot light beam for long range. The handle also has two metal rings either end to attach the shoulder strap for comfortable carrying when not in use.

The tail light can also be used at the same time as the main beam and points towards the floor while being carried horizontal, which provides flood lighting at your feet allowing you to see immediately in front of you as well as further ahead with the main beam. The torch can also be stood up on the front end which means the tail beam is now pointing outwards which is useful for up close hands free tasks that need flood lighting.

To turn on the main light hold down the button on the handle for 0.5 seconds and once on each press will cycle through low, mid, high and turbo. Strobe is accessed by holding down the handle button for 1.2 seconds from off or on. The tail light is turned on with the cooper coloured metal button on the bottom of the torch by holding it down for 0.5 seconds and once on each press will cycle through low, mid and high. To prevent accidental activation the WT50R can be put into lockout mode by quickly double pressing the handle button and the light will blink to show this has happened. The light can be unlocked again in the same way.

A Fenix 5200 mAh lithium-ion battery is included and is charged inside the torch with the supplied USB Type-C cable. Remove the dust cover from the USB port, located on the tail of the torch, and plug the cable into the torch one end and the other end into a computer/laptop or a suitable USB mains/car adaptor. Four LED indicators will flash in turn before turning solid during the charging progress and once all four LEDs are solid the torch is fully charged.

The WT50R also features a power bank function which allows external devices to be charged up using the battery from the torch. Next to the charging port is a standard USB port so that you can plug in the charging cable for your device and begin charging. The four LED indicators will gradually decrease as the battery power reduces. Always replace the dust cover after using the charging ports to ensure waterproofing and dust ingress protection remain in tact.

As well as showing charging status the four LEDs are also a battery level indicator that displays the battery status briefly when the tail button is pressed with the light turned off. Four LEDs is 80-100% power, three LEDs is 60-80% power, two LEDs is 40-60% power, one LED is 20-40% and one flashing LED is less than 20% power and the battery should be charged as soon as possible when at this stage.

The overheat protection will automatically reduce the turbo output if the temperature of the torch reaches 65°C or above in order to protect the LED from overheating. Once the temperature has cooled the turbo can then be selected again.

Product Features

Digitally regulated output to maintain stable output
Head light and tail light functions
Intelligent memory function
lockout mode
Over heat protection
USB Type-C fast charging.

Operational Modes

Head Light:
Low: 50 lumens; 112 hours run-time; 48 m beam range
Mid: 350 lumens; 18 hours run-time; 138 m beam range
High: 1000 lumens; 5 hours, 30 minutes run-time; 329 m beam range
Turbo: 3200 lumens; 2 hours run-time; 425 m beam range*
Strobe: 3200 lumens

Tail Light:
Low: 50 lumens; 116 hours run-time; 15 m beam range
Mid: 200 lumens; 25 run-time; 31 m beam range
High: 500 lumens; 7 hours run-time; 54 m beam range

Note: *The turbo output is measured at total run-time, including output at reduced levels due to temperature or the built-in protection mechanism.

Tested to ANSI/PLATO FL1 standard using the included lithium-ion rechargeable battery. Results may vary between torch, battery and environments.

Technical Details

Type: Rechargeable LED torch
Operating Modes: Head Light: Low, Mid, High, Turbo, Strobe / Tail Light: Low, Mid, High
Luminous Flux: Up to 3200 lumens
Lamp Type: Cree XHP70.2 N4 LED x 1 / Cree XP-G3 S4 CW LED x 1
Beam Range: Up to 425 m
Batteries Required: 1 x 5200 mAh lithium-ion rechargeable battery pack (included)
Run Time: Up to 112 hours (low setting)
Dimensions: 200.8 x 108.7 x 65 mm
Weight: 742 grams (including battery)
Body Colour: Black
Body Material: High strength and oxidation resistant aluminium
Body Finish: Premium type III hard anodised anti-abrasive finish
Reflector: Textured
Switch Type: Tail button and handle button
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP68 Standard (2 m)
Warranty: 5 years (torch) / 1 year (battery)
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and includes:
Fenix WT50R LED torch x 1
Fenix 5200 mAh lithium-ion battery x 1
USB Type-C charging cable x 1
UK mains USB adaptor x 1
Shoulder strap x 1
Spare O-ring x 1
Manual x 1

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

15 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Nitecore UAC20 USB-C Charging Cable

Nitecore UAC20 USB-C Charging Cable

USB-C to USB-A 2.0 charging cable

6 in stock

The Nitecore UAC20 is a high quality cable designed to connect a USB-C port a standard USB-A port.

[More details]
£9.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Customers Who Bought This Item Also Bought