The Fenix WT20R is a multifunctional work light that features a rechargeable battery and is capable of spot or flood beams that both deliver a maximum output of 400 lumens.
As well as two LEDs for different beams the WT20R has another show stealing function with it's adjustable head which can be moved from it's vertical position to horizontal within a 105° angle. You can use it attached to a pocket and aim the light forward without having to remove it from your person, or with the strong magnetic tail end it can be attached to a magnetic surface for hands free use and the head can be angled into the most convenient position for the task at hand.
The WT20R is powered by the included rechargeable 2000 mAh lithium polymer battery pack which is charged up by firstly removing it from the torch at the tail end, and then inserting the included USB cable into the micro USB port on the battery itself. The other end of the cable then plugs into a USB port or a USB adaptor and the charging indicator on the top of the battery will turn red to show charging in progress and turn blue once charging is complete. Two AA alkaline batteries can also be used in place of the battery pack, which is useful as a back up if you run out of charge.
The left hand Cree LED provides a spotlight than can reach up to 117 metres with a maximum output of 400 lumens in the high setting. The right hand Cree LED also has a maximum output of 400 lumens, however instead provides flood lighting with a beam range of 37 metres.
A single button is on the side of the torch and controls all functions. Press and hold the button for 0.5 seconds to turn the light on and off. Once the light is turned on it will either be in spot of flood at the last brightness setting used and each single press will cycle through low, mid and high in either spot or flood. To change between the spot and flood quickly press the button twice while the light is on. Only low and mid can be accessed when using AA batteries.
Four LED indicators sit within the button and light up to show the battery status when the button is pressed with the light off. Four LEDs is 80-100% power, three LEDs is 60-80% power, two LEDs is 40-60% power, one LED is 20-40% and one flashing LED is less than 20% power and the battery should be charged as soon as possible when at this stage.
The large pocket clip allows for easy attachment to clothing or a back pack for sturdy carrying and a lanyard also provide extra safety when the torch is being carried in the hand.
150° adjustable head
Spot and flood outputs
LED battery indicators
Magnetic tail for hands free use
Reverse polarity protection
High: 400 lumens; 3 hours, 30 minutes run-time; 117 m beam range
Mid: 150 lumens; 10 hours run-time; 72 m beam range
Low: 50 lumens; 21 hours run-time; 42 m beam range
High: 400 lumens; 3 hours, 30 minutes run-time; 56 m beam range
Mid: 150 lumens; 10 hours run-time; 35 m beam range
Low: 50 lumens; 21 hours run-time; 20 m beam range
Lab tested to ANSI / PLATO FL 1 standard using the included Fenix ARB-LP-2000U lithium polymer rechargeable battery. Real use conditions may be different and therefore results may vary.
Type: Rechargeable LED work light
Operating Modes: Spot: Low, Mid, High / Flood: Low, Mid, High
Luminous Flux: Up to 400 lumens
Lamp Type: Cree LED x 2
Beam Range: Up to 117 m
Batteries Required: Lithium polymer battery pack x 1 (included) or AA alkaline battery x 2
Run Time: See information above
Dimensions: 117.5 x 43.2 x 28.3 (mm)
Weight: 154 grams (including battery)
Body Colour: Black
Body Material: Polycarbonate body and aircraft grade aluminium head
Switch Type: Push buttons
Impact Resistance: 1 m
Environmental: Dust and water resistant to IP66 Standard (powerful water jet)
Warranty: 5 years (head torch) / 1 year (battery)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix WT20R LED Torch x 1
Fenix ARB-LP-2000U lithium polymer battery x 1
Micro USB charging cable x 1
Spare O-ring x 2
Lanyard x 1
Manual x 1