Fenix TK47 Ultra Thrower LED Torch
Fenix TK47 Ultra Thrower LED TorchFenix TK47 Ultra Thrower LED TorchFenix TK47 Ultra Thrower LED Torch
Fenix TK47 Ultra Thrower LED TorchFenix TK47 Ultra Thrower LED TorchFenix TK47 Ultra Thrower LED Torch

Fenix TK47 Ultra Thrower LED Torch

  (1 Review)
Availability:  4 in stock
Brand:  Fenix
Product Code:  TK47-UT

The Fenix TK47 Ultra Thrower utilises a long range Cree XHP-35 HI NW LED combined with a deep metal reflector to provide a tight ultra long beam that reaches up to 700 metres.


Battery Options:  

Laser Engraving:  
£129.95

RRP: £139.95|Save: £10.00

The Fenix TK47 Ultra Thrower utilises a long range Cree XHP-35 HI NW LED combined with a deep metal reflector to provide a tight ultra long beam that reaches up to 700 metres.

As well as an impressive beam range, the TK47 UT also offers a maximum output of 1300 lumens from the main LED and features a light built into the tail of the torch that acts as a mini lantern / emergency beacon. Four brightness levels and strobe are available from the main Cree LED, while the tail offers a white output and three red outputs. The main light can be used simultaneously with the tail light.

The main light is operated with a side button and is turned on by holding the button for 0.5 seconds. Once on the light cycles through low, mid, high and turbo. To access the strobe, hold the button for 1.5 seconds and single press to return to general brightness settings. Holding the tail light for 0.5 seconds will turn it on and each press cycles through white light, red light, red flash and red SOS.

It is powered by two rechargeable 18560 lithium-ion batteries and can run up to 220 hours in the lowest white setting. CR123A batteries can be used as an emergency back up, but they will only be able to produce an output of around 800 lumens.

A lock out function prevents accidental activation and is accessed by double clicking the side button while the torch is off. The light will blink twice to indicate that it has entered the lock out mode and is exited by double clicking the button again.

A built-in voltage downshift feature will automatically reduce the output of the torch if the batteries drop below the preset voltage level, in order to remind you to charge the batteries and it will eventually turn off when the over-discharge protection in the batteries kicks in.

Product Features

Digitally regulated output maintains constant brightness
Reverse polarity protection
Low voltage function and overheat protection
Lock out function and intelligent memory circuit
Main light and tail light can be used simultaneously

Operational Modes

Main Light:
Low: 10 lumens; 220 hours run-time; 73 m beam range
Mid: 100 lumens; 40 hours run-time; 214 m beam range
High: 400 lumens; 7 hours, 15 minutes run-time; 412 m beam range
Turbo: 1300 lumens; 1 hours, 50 minutes run-time; 700 m beam range*
Strobe mode: 1300 lumens

Tail Light:
White Light: 30 lumens; 43 hours, 30 minutes run-time
Red Light: 1.5 lumens; 150 hours run-time
Red Flash: 1.5 lumens
Red SOS: 1.5 lumems

Tested to ANSI /PLATO FL1 standard using 2 x ARB-L18-3500 18650 3500 mAh rechargeable lithium-ion batteries.

Note: *The over-heat protection will automatically drop the brightness level if the internal temperature reaches 65°C or above in order to protect the LED, therefore the run-time is an estimated time.


Important Battery and Battery Charger Information

Rechargeable Cells - If you do not already have compatible lithium-ion rechargeable batteries you can select them from the battery options at the top of the page and you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Product Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Tactical hand held torch
Operating Modes: Low / Mid / High / Turbo / Strobe / Tail Light
Luminous Flux: Up To 1300 lumens
Lamp Type: Cree XHP-35 HI neutral white LED
Reflector: Smooth
Beam Range: Up to 700 m
​Central Beam Angle: 4.5°
Batteries Required: 2 x 18650 lithium-ion
Run Time: Up to 220 hours
Overall Length: 266.2 mm
Head Diameter: 61.5 mm
Barrel Diameter: 28.6 mm
Weight: 376 grams (excluding batteries)
Body Colour: Black
Body Material: Premium type III hard-anodised anti-abrasive finish
Window Type: Toughened ultra clear glass lens with anti-reflective coating
Switch Type: Side push button and tail light buttom
Impact Resistance: 1 m
Environmental: Dust resistant and waterproof to IP68 Standard
Warranty: 5 years free repair, limited life time warranty
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Fenix TK47 UT LED torch x 1
Lanyard x 1
Holster x 1
Spare O-Ring x 1
Batteries (see options above)
Manual x 1

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Availability:  10+ in stock

Fenix ARB-L18-2600 is a premium quality high capacity 18650, 2600 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£11.95Add to Basket

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Availability:  10+ in stock

Fenix ARB-L18-3500 is a premium quality high capacity 18650, 3500 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£19.95Add to Basket

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

This model also features a USB port output, enabling you to charge phones, etc.

Availability:  4 in stock

The Fenix ARE-X2 is a dual bay battery charger capable of charging lithium-ion, NiMH and NiCd type batteries. Compatible with the following batteries: Lithium-ion: 26650, 18650, 16340/RCR123A, 14500 and 10440. NiMH/NiCd: AA, AAA

[More details]
£19.95Add to Basket

Fenix ARE-C1 Plus Dual Bay Li-ion/NiMH Battery Charger

Fenix ARE-C1 Plus Dual Bay Li-ion/NiMH Battery Charger

Charges lithium-ion and NiMH/NiCd type batteries.

Availability:  8 in stock

The Fenix ARE-C1+ is a smart charger that features two independent charging channels capable of charging a range of lithium-ion and NiMH/NiCd batteries.

[More details]
£27.95Add to Basket

Fenix ARE-C2 Plus Four Bay Li-ion/NiMH Battery Charger

Fenix ARE-C2 Plus Four Bay Li-ion/NiMH Battery Charger

Charges lithium-ion and NiMH/NiCd type batteries.

Availability:  10+ in stock

The Fenix ARE-C2+ is the upgrade of the best selling ARE-C2 and features four independent charging channels capable of charging a range of lithium-ion and NiMH/NiCd batteries.

[More details]
£39.95Add to Basket

Xtar VC2 Dual Bay Lithium-ion Battery Charger

Xtar VC2 Dual Bay Lithium-ion Battery Charger

For charging Lithium-ion type batteries only.

Availability:  10 in stock

The Xtar VC2 is a lithium-ion battery charger with two charging bays. The VC2 is suitable for charging the following batteries 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650 lithium-ion type batteries. For charging 3.6 V or 3.7 V lithium-ion batteries only.

[More details]
£9.95RRP: £16.95Add to Basket

Xtar MC2 Dual Bay Lithium-ion Battery Charger

Xtar MC2 Dual Bay Lithium-ion Battery Charger

Charges Lithium-ion type batteries only

Availability:  10+ in stock

The Xtar MC2 is a lithium-ion battery charger with two charging bays. The MC2 is suitable for charging the following batteries 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650 lithium-ion type batteries. For charging 3.6 V or 3.7 V lithium-ion batteries only.

[More details]
£4.95RRP: £10.95Add to Basket

(1 Review):  

Rating:  
Fenix TK47
Saturday, 8 April 2017  | 

Fantastic build quality. Usable throw to light up stable across field at 200 metres. Provides enough spill to light up area around main beam. Not just a narrow spotlight in other words. Great service from Stewart. Ordered on Monday & received on Wednesday!

There are currently no FAQ's for this product

This is a new website feature, so please use the form opposite if you do have any enquiries regarding the Fenix TK47 Ultra Thrower LED Torch. This will help us generate a useful questions and answer section for each product.

Please complete the form below if you wish to ask us a question

 

*
Name
*
E-Mail
*
Message
*
Please add the two numbers

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive a Silverpoint Hunter XL120 LED Head Torch completely FREE!

The RRP of the Silverpoint Hunter XL120 LED Head Torch is £11.95

Free gift offer from Torch Direct Ltd
Customers Who Bought This Item Also Bought
Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

This model also features a USB port output, enabling you to charge phones, etc.

Availability:  4 in stock

The Fenix ARE-X2 is a dual bay battery charger capable of charging lithium-ion, NiMH and NiCd type batteries. Compatible with the following batteries: Lithium-ion: 26650, 18650, 16340/RCR123A, 14500 and 10440. NiMH/NiCd: AA, AAA

[More details]
£19.95Add to Basket

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Availability:  10+ in stock

Fenix ARB-L18-3500 is a premium quality high capacity 18650, 3500 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£19.95Add to Basket

Fenix ARE-C2 Plus Four Bay Li-ion/NiMH Battery Charger

Fenix ARE-C2 Plus Four Bay Li-ion/NiMH Battery Charger

Charges lithium-ion and NiMH/NiCd type batteries.

Availability:  10+ in stock

The Fenix ARE-C2+ is the upgrade of the best selling ARE-C2 and features four independent charging channels capable of charging a range of lithium-ion and NiMH/NiCd batteries.

[More details]
£39.95Add to Basket