The Fenix TK25 IR is a powerful, versatile torch that offers a maximum output of 1000 lumens white light as well as an 850 nm Infrared light output.
Four brightness levels and strobe are available from the two white Cree XP-G2 S3 LEDs and the infrared LEDs offer a choice of either a high 3 W output or a low 1 W output. The modes are switched between with a quarter turn of the rotary torch head, which swaps between the two sets of LEDs and aligns the chosen LEDs with the reflector.
The large circular tactical switch controls momentary on and constant on functions, whilst the smaller mode switch selects the brightness settings. In the white setting, the mode button cycles through low, mid, high and turbo with each press. In infrared mode it cycles between low and high. Strobe is activated by turning the torch on in the white setting and holding the mode switch for one second. From off holding down the mode button will provide instant access to strobe in the white setting or instant access to high in the infrared setting.
It is powered by two CR123A lithium metal non-rechargeable batteries or one 18650 lithium-ion rechargeable battery. A low voltage warning system downshifts the output when the battery voltage drops below the torches preset levels for each mode. Once it drops to the low output the torch will blink three times every 5 minutes to remind you to change the CR123A batteries or charge up the 18650 battery.
A holster unlike any other is included. The torch is clicked into the holster and for extra security a rubberised strap can be fastened over the torch. The back of the holster features a snap shut clip that will fit on belts or webbing up to 55 mm wide. A quick release button can be pressed to easily detach the holster from the belt. The TK25 IR can also be used while in the holster as the top of it has a circle cut out to allowing the light to shine through.
For weapon mounted use the TK25 IR is compatible with the Fenix ALG-01/ ALG-00 gun mounts and the AER-03 tactical pressure switch, please see the related products.
Digitally regulated output (Whilst battery voltage is high enough to support it)
Reverse polarity protection, protects from improper battery installation
Includes quick release belt clip and a pocket clip
Tactical tail switch for momentary on function
Turbo: 1000 lumens; 2 hours run-time; 225 m beam range*
High: 300 lumens; 5 hours, 20 minutes run-time; 124 m beam range
Mid: 100 lumens; 22 hours, 20 minutes run-time, 75 m beam range
Low: 15 lumens; 110 hours run-time; 25 m beam range
Strobe: 1000 lumens
* Note: The over-heat protection will drop the turbo brightness level if the internal temperature of the torch exceeds 65°C and gradually increase the brightness again as the torch cools, therefore the run-time is an accumulated time.
Tested to ANSI / PLATO FL1 standard using Fenix 18650 ARB-L18-3500 lithium-ion battery
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Tactical hand held LED torch
Operating Modes: Turbo / High / Mid / Low / Strobe / 850 nm IR 1 W / 850 nm IR 3 W
Luminous Flux: Up to 1000 lumens ( White output)
Lamp Type: Cree XP-G2 S3 white LED x 2/ 1500mW Infrared emitters x 2
Beam Range: Up to 225 m
Batteries Required: 1 x 18650 li-ion (rechargeable) / 2 x CR123A (non-rechargeable)
Run Time: Up to 110 hours (low setting)
Overall Length: 142.6 mm
Head Diameter: 40 mm
Barrel Diameter: 25.4 mm
Weight: 156.5 grams (excluding batteries)
Colours Available: Black
Body Material: Aircraft grade aluminium
Body Finish: Premium type III hard-anodised anti-abrasive finish
Switch Type: Tactical tail switch and tail mode switch
Impact Resistance: 1 m
Environmental: Waterproof to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix TK25 IR LED torch x 1
Lanyard x 1
Belt clip holster x 1
Spare O-ring x 1
Pocket clip x 1
Manual x 1