Fenix TK16 LED Torch
Fenix TK16 LED TorchFenix TK16 LED TorchFenix TK16 LED Torch
Fenix TK16 LED TorchFenix TK16 LED TorchFenix TK16 LED Torch

Fenix TK16 LED Torch

  (Avg rating from 4 reviews)
Brand:  Fenix
Product Code:  TK16

Availability:  

5 in stock
 
maximum allowance of 20 characters
£70.95
Save £9.00 (RRP £79.95)

The Fenix TK16 offers a maximum 1000 lumen white light output, as well as a 240 metre beam range all in a compact form that is ideal for hand held use and weapon mounting.

Featuring four brightness levels and strobe mode the TK16 has a dual tail cap switch that allows control of all the modes.

The large tactical switch controls momentary on and constant on functions, whilst the smaller mode switch cycles through the brightness settings. Strobe is activated by turning the torch on and holding the mode switch for one second, or from off it can be temporarily activated by holding down the mode button.

Using a Cree XM-L2 U2 LED the TK16 is powered by a single 18650 rechargeable lithium-ion battery or by two CR123A non-rechargeable lithium metal batteries (not included).

For weapon mounted use the TK16 is compatible with the Fenix ALG-01 gun mount and the AER-03 tactical pressure switch, please see the related products panel to the right of the screen. 

Product Features

Tactical crenellated strike bezel
Digitally regulated output maintains constant brightness
Reverse polarity protection, protects from improper battery installation
Toughened ultra clear glass lens with anti-reflective coating
Tactical tail switch for momentary on function
Anti-roll, slip resistant body design

Operational Modes

Turbo: 1000 lumens; 1 hour, 10 minutes run-time; 240 m beam range*
High: 400 lumens; 3 hours, 25 minutes run-time
Mid: 150 lumens; 10 hours run-time
Low: 10 lumens; 150 hours run-time
Strobe: 1000 lumens

Note: *The over-heat protection will drop the turbo brightness level into high brightness level after 20 minutes continuous use, therefore the run-time is an accumulated time.

Tested to ANSI / NEMA FL1 standard using Fenix ARB-L2S 3400 mAh lithium-ion battery


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Tactical hand held LED torch
Operating Modes: Turbo / High / Mid / Low / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: CREE XM-L2 U2 LED
Beam Range: Up to 240 m
Batteries Required: Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion
Overall Length: 140 mm
Head Diameter: 34 mm
Barrel Diameter: 25 mm
Weight: 122 grams (excluding batteries)
Colours Available: Black
Body Material: Aircraft grade aluminium
Body Finish: Premium type III hard-anodised anti-abrasive finish
Switch Type: Tactical tail cap switch and side mode switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard
Warranty: 2 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Fenix TK16 LED torch x 1
Lanyard x 1
Holster x 1
Spare O-ring x 1
Manual x 1

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Single use non rechargeable cells

64 in stock

We DO NOT ship these batteries by theselves to Northern Ireland, Scottish Highlands, Scottish Islands and other Islands due to high courier charges for certain locations, we will only send it to mainland UK. Please contact us before ordering if you are unsure whether we can ship to your location.

The Energizer CR123A offers long lasting performance in every device that it powers whether it is a torch, camera, or a high tech gadget. This battery is ideal for many brands of torch on the market including Fenix, Olight, Nitecore, Ledlenser, Xtar etc.

[More details]
£3.95Add to Basket

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

42 in stock

Fenix ARB-L18-2600 is a premium quality high capacity 18650, 2600 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£11.95Add to Basket

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

46 in stock

Fenix ARB-L18-3500 is a premium quality high capacity 18650, 3500 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£19.95Add to Basket

Fenix ARE-X1 Charger and 18650 2600 mAh Li-ion Battery Set

Fenix ARE-X1 Charger and 18650 2600 mAh Li-ion Battery Set

Also functions as a Power Bank - Ideal for charging many USB devices

12 in stock

This charging set includes the Fenix ARE-X1 lithium-ion battery charger with a single charging bay and the Fenix ARB-L18-2600 18650 2600 mAh lithium-ion battery.

[More details]
£23.95Add to Basket

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Features Power Bank Function

12 in stock

The Fenix ARE-X1 is a lithium-ion battery charger with a single charging bay. It is suitable for charging one 18650 or one 26650 lithium-ion battery and is supplied with a USB charging cable.

[More details]
£11.95Add to Basket

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

This model also features a USB port output, enabling you to charge phones, etc.

13 in stock

The Fenix ARE-X2 is a dual bay battery charger capable of charging lithium-ion, NiMH and NiCd type batteries. Compatible with the following batteries: Lithium-ion: 26650, 18650, 16340/RCR123A, 14500 and 10440. NiMH/NiCd: AA, AAA

[More details]
£19.95Add to Basket

Fenix ARE-D1 Single Bay Li-ion Battery Charger

Fenix ARE-D1 Single Bay Li-ion Battery Charger

Compatible with Li-ion & NiMH/Ni-Cd batteries
Features a power bank function for charging external devices

12 in stock

The Fenix ARE-D1 is a lithium-ion and NiMH smart multi charger with a single charging bay, and features a digital display and a power bank function.

[More details]
£15.95Add to Basket

Fenix ARE-A2 Dual Bay Li-ion/NiMH Battery Charger

Fenix ARE-A2 Dual Bay Li-ion/NiMH Battery Charger

Charges lithium-ion and NiMH/NiCd type batteries.

10 in stock

The Fenix ARE-A2 is the replacement for the best selling ARE-C1+ and has now been upgraded to be able to charge 21700 lithium-ion batteries as well as the same batteries as before. It features two independent charging channels capable of charging a range of lithium-ion and NiMH/NiCd batteries.

[More details]
£27.95Add to Basket

Fenix ALG-01 High Quality Gun Mount

Fenix ALG-01 High Quality Gun Mount

8 in stock

The Fenix ALG-01 is a high quality gun mount for the Weaver/Picatinny type rail and fits a wide
range of Fenix torches.

[More details]
£12.95Add to Basket

Fenix AER-03 Tactical Remote Pressure Switch

Fenix AER-03 Tactical Remote Pressure Switch

2 in stock

The Fenix AER-03 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch. The noiseless pressure pad measures 30 mm long and provides momentary operation of your torch by applying slight finger pressure, once pressure is released the torch turns off. A round switch activates constant illumination of your torch, great for night time navigation.

[More details]
£17.95RRP: £21.95Add to Basket

Fenix AER-03 V2.0 Tactical Remote Pressure Switch

Fenix AER-03 V2.0 Tactical Remote Pressure Switch

Compatible with the Fenix TK16, TK20R, TK25, TK26R & TK32

2 in stock

The Fenix AER-03 V2.0 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch.

[More details]
£21.95Add to Basket

Fenix Quick Release Bike Mount

Fenix Quick Release Bike Mount

4 in stock

The Fenix ALB-10 is a versatile quick release bike mount which enables the fitting of a torch to your bike handlebars. The mount can hold torches with a body diameter of 18-26 mm and fits on handlebars with a diameter of 22-35 mm. Horizontal adjustment of 30 degrees left or right is also possible.

[More details]
£14.95Add to Basket

Fenix AOD-M Diffuser

Fenix AOD-M Diffuser

For LD41, TK09 2016, TK15UE, TL15C, TK16, TK22, RC20, PD40 and More

10 in stock

The Fenix AOD-M diffuser is designed to fit a head diameter between 34 - 40 mm and converts your Fenix torch into a powerful and versatile 360 degree lantern and is compatible with the following models: LD41/LD41 2015, TK09 2016, TK10, TK11, TK12, TK15, TK15UE, TL15C, TK16, TK20, TK21, TK22, E40, E50, RC10, RC15, RC20, PD40

[More details]
£4.95Add to Basket

Fenix AOT-M Traffic Wand

Fenix AOT-M Traffic Wand

7 in stock

Fenix traffic wands can convert your torch into a glowing high-visibility wand. Designed for emergency situations and traffic control.

[More details]
£4.95Add to Basket

Fenix AOF-M Filters for TK Series

Fenix AOF-M Filters for TK Series

Blue filter for the TK series of torches with a 34 mm head.

8 in stock

Only the Blue filter is now available.

These handy filter accessories are for the Fenix TK09, TK09 2016, TK11, TK11 TAC, TK12, TK15, TK15 UE, TK16 and TK20R torches.

[More details]
£6.95RRP: £7.95Add to Basket

Fenix TK Camping Lampshade

Fenix TK Camping Lampshade

Fits TK09/TK09 2016, TK10, TK11, TK12, TK15/TK15UE, TK15C, TK16 or 34 mm head diameter.

6 in stock

The Fenix AD502-N TK camping lampshade transforms your Fenix torch into a powerful camping light, serving as a versatile, multi-purpose lighting tool without the added weight and bulk of a separate lantern. Fits 34 mm head diameter.

[More details]
£5.95RRP: £6.95Add to Basket

(Avg rating from 4 reviews):  

Rating:  
Small and Powerful
Wednesday, 26 April 2017  | 

I lost a TK15 and replaced it with this, even better, torch. A little smaller, lighter and more powerful version.


Rating:  
Great Torch
Tuesday, 4 April 2017  | 

I bought my TK16 about 6 weeks ago, I have to say it's the best torch I've owned, 6 year's ago I purchased the TK15 that I still have but the TK16 is so much brighter, personally I find the beam is perfect, better compared to the TK15, not a spot and not too much of a flood light, it has 4 brightness settings, no 2 setting is ideal for general walking, in turbo, no 4 setting it lights up the area in front like a car headlight also having the mode setting button on the back is a big improvement.


Rating:  
Fenix TK16 LED Torch
Thursday, 25 August 2016  | 

I bought this torch to fit above my camera to use in Africa with a 600mm lens at night. The 1,000 lumens it produces is a high quality light that easily produces enough light to photograph wildlife. I am not yet able to confirm how efficient the batteries will be. The company was very polite, helpful and efficient in answering my questions prior to purchase. (Purchased with the remote control cable.)


Rating:  
Great product!
Saturday, 10 October 2015  | 

This torch is amazing! I like the power of the led and the buttons are very handy and the strobe is very helpful for emergency situations. Fast delivery / Good price for good products!

Thank you Torch direct!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Customers Who Bought This Item Also Bought
Fenix AER-03 Tactical Remote Pressure Switch

Fenix AER-03 Tactical Remote Pressure Switch

2 in stock

The Fenix AER-03 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch. The noiseless pressure pad measures 30 mm long and provides momentary operation of your torch by applying slight finger pressure, once pressure is released the torch turns off. A round switch activates constant illumination of your torch, great for night time navigation.

[More details]
£17.95RRP: £21.95Add to Basket

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

46 in stock

Fenix ARB-L18-3500 is a premium quality high capacity 18650, 3500 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£19.95Add to Basket

Fenix AOD-M Diffuser

Fenix AOD-M Diffuser

For LD41, TK09 2016, TK15UE, TL15C, TK16, TK22, RC20, PD40 and More

10 in stock

The Fenix AOD-M diffuser is designed to fit a head diameter between 34 - 40 mm and converts your Fenix torch into a powerful and versatile 360 degree lantern and is compatible with the following models: LD41/LD41 2015, TK09 2016, TK10, TK11, TK12, TK15, TK15UE, TL15C, TK16, TK20, TK21, TK22, E40, E50, RC10, RC15, RC20, PD40

[More details]
£4.95Add to Basket

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Features Power Bank Function

12 in stock

The Fenix ARE-X1 is a lithium-ion battery charger with a single charging bay. It is suitable for charging one 18650 or one 26650 lithium-ion battery and is supplied with a USB charging cable.

[More details]
£11.95Add to Basket

Silverpoint Firefly LED Torch

Silverpoint Firefly LED Torch

3 in stock

The Silverpoint Firefly is compact and light, and this fun little torch is small enough to fit into any pocket or bag.

[More details]
£7.95Add to Basket

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

42 in stock

Fenix ARB-L18-2600 is a premium quality high capacity 18650, 2600 mAh Lithium-ion battery specifically designed for high intensity torch use and is the perfect companion for all Fenix 18650 powered lights.

[More details]
£11.95Add to Basket

Fenix ALG-00 Quick Release Gun Mount

Fenix ALG-00 Quick Release Gun Mount

8 in stock

Fenix compatible models include: TK09, TK11, TK12, TK15, TK16, TK22, TK32, PD32, PD35, PD35 Tac etc.

[More details]
£22.95Add to Basket

Fenix ALG-01 High Quality Gun Mount

Fenix ALG-01 High Quality Gun Mount

8 in stock

The Fenix ALG-01 is a high quality gun mount for the Weaver/Picatinny type rail and fits a wide
range of Fenix torches.

[More details]
£12.95Add to Basket