The Fenix SE10 is an intrinsically safe torch for use in locations that are at risk of explosion (excluding underground mines). It uses a Cree XP-E2 R3 LED to provide a single output of 100 lumens. It conforms to the ATEX directive which is internationally recognised.
Made from explosion proof and anti-static plastics, this torch can be used in an atmosphere of flammable gas zones 0-2 and atmosphere of flammable dust zones 20-22. It has achieved II 1G Ex ia IIC T4 Ga /II 1D Ex ia IIIC T135℃ Da explosion proof classifications, which means it can be used in flammable and explosive places including oil fields, metallurgy, railways, electric utilities, public security, petrochemical and chemical industries.
The IP68 rating means that this torch is dustproof as well as waterproof and can be submerged underwater up to 2 metres.
The tail switch provides momentary illumination by holding the switch half way and turns off when the button is released. A full click of the button will turn the light on and off. The U shape tail covers the button so that the torch can stand on its end and also stops the button being accidentally pressed.
Powered by three AA alkaline batteries, the SE10 has a run-time of up to 12 hours, 50 minutes. Because of the intended use of the torch only alkaline batteries can be used with this torch and to maintain product certification you must use either Energizer E91, Duracell MN1500 or RAYOVAC 815 AA alkaline batteries.
To keep the battery compartment safe and secure it can only be accessed using an allen wrench (included). Do not attempt to change the batteries in a hazardous environment.
ATEX Zone 0 compliant
Explosion proof, safe around sparks
Includes allen wrench to open battery compartment
TÜV 16 ATEX 7961 X
II 1G Ex ia IIC T4 Ga
II 1D Ex ia IIIC T135°C Da
IECEx TUR 16.0065X
Ex ia IIC T4 Ga
Ex ia IIIC T135°C Da
Type: ATEX hand torch
Operating Modes: Momentary / On / Off
Luminous Flux: 100 lumens
Lamp: Cree XP-E2 R3 LED
Beam Range: Up to 160 m
Batteries Required: 3 x AA alkaline (either Energizer E91, Duracell MN1500 or RAYOVAC 815 AA)
Run Time: Up to 12 hours, 50 minutes
Dimensions: 177.5 x 53 x 51 mm
Weight: 164 grams (excluding batteries)
Body Colour: Yellow with black head
Body Material: Explosion proof and antistatic plastics
Switch Type: Tail push button
Impact Resistance: 1 m
Environmental: IP68 standard (dust proof and submersible to 2 m depth for 30 minutes)
Regulatory Compliance: FC, CE / RoHS / Ex / IECEx
Packaging and Contents
Supplied in retail packaging and includes:
Fenix SE10 ATEX LED torch x 1
Energizer AA alkaline battery x 3
Spare O-ring x 1
Allen wrench x 1
Manual x 1