Fenix RC20 Rechargeable LED Torch
Fenix RC20 Rechargeable LED TorchFenix RC20 Rechargeable LED TorchFenix RC20 Rechargeable LED Torch
Fenix RC20 Rechargeable LED TorchFenix RC20 Rechargeable LED TorchFenix RC20 Rechargeable LED Torch

Fenix RC20 Rechargeable LED Torch

  (Avg rating from 2 reviews)
Brand:  Fenix
Product Code:  RC20


1 in stock
Fenix ARB-L1-2600 lithium-ion battery included
max allowance of 20 characters
Save £10.00 (RRP £119.95)

The Fenix RC20 is a rechargeable LED torch with a maximum output of 1000 lumens in turbo mode from it's Cree XM-L2 U2 LED.

Powered by a tailored Fenix 2600 mAh ARB-L1-2600 lithium-ion battery, the RC20 can run up to 120 hours when in low mode. The battery can be inserted either way around, featuring positive and negative poles at both ends, which is perfect for after dark battery changes.

Four brightness settings and strobe are available, with the choice of general mode and simplified mode. General mode offers all four brightness settings, while the simplified mode offers just mid and turbo. The modes can be changed by holding the mode button for 2 seconds while the torch is on.

The tail cap clicky switch can be half pressed for momentary on and fully pressed for constant on. Once on, the mode switch cycles through the modes with each press and holding it down for 0.5 seconds will activate strobe. When the torch is off strobe can still be accessed by holding down the mode button.

To charge the torch, simply place the head in the cradle and turn until it locks into position. The cradle has a USB end which can be plugged strait into a computer or into the mains using the included UK mains adaptor. The RC20 can also be charger in the car with a car charger adaptor, sold separately on our website, please see the related products panel to the right.

The charging cradle can be wall mounted for convenience with the pre-assigned holes either side of the cradle.

The RC20 is perfect for many roles including search and rescue, police, security, camping, vehicle and general every day use.

Product Features

Anti-roll, slip-resistant body design.
Toughened ultra-clear glass lens with anti-reflective coating
Digitally regulated circuit - maintains constant brightness
Low battery voltage indicator
Memory circuit remembers last mode used
Battery level indicator
Two selectable modes
Overheat protection to avoid high surface temperature

Operational Modes

Low: 10 lumens; 120 hours run-time
Mid: 150 lumens; 9 hours, 50 minutes run-time
High: 425 lumens; 2 hours, 55 minutes run-time
Turbo: 1000 lumens; 1 hours, 10 minutes run-time*
Strobe: 1000 lumens

Tested to ANSI /NEMA FL1 standard using a Fenix 2600 mAh ARB-L1-2600 lithium-ion battery.

Note: *The over-heat protection will automatically drop the turbo brightness level into high brightness if the torch reaches a temperature of 65°C or above, therefore the run-time is an accumulated time. Once the temperature has dropped turbo mode can be used.

Technical Details

Type: Professional rechargeable torch
Operating Modes: Low / Mid / High / Turbo / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XM-L2 U2 LED
Reflector: Smooth
Beam Range: 290 m
Batteries Required: Tailored 2600 mAh rechargeable lithium-ion battery
Run Time: Up to 120 hours (low setting)
Charge Time: Approx. 3 hours
Overall Length: 161 mm
Head Diameter: 40 mm
Barrel Diameter: 25.4 mm
Weight: 205 grams (including battery)
Body Colour: Black
Body Material: Made from durable aircraft grade aluminium
Body Finish: Premium type III hard anodised anti-abrasive finish
Switch Type: Dual tail switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX 8 Standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in a rigid plastic storage case and includes:
Fenix RC20 LED torch x 1
Fenix ARB-L1-2600 lithium-ion battery x 1
Holster x 1
Charging cradle with USB lead x 1
UK mains plug adaptor x 1
Lanyard x 1
Spare O-rings x 1
Instruction manual x 1

Fenix Quick Release Bike Mount

Fenix Quick Release Bike Mount

4 in stock

The Fenix ALB-10 is a versatile quick release bike mount which enables the fitting of a torch to your bike handlebars. The mount can hold torches with a body diameter of 18-26 mm and fits on handlebars with a diameter of 22-35 mm. Horizontal adjustment of 30 degrees left or right is also possible.

[More details]
£14.95Add to Basket

Fenix ALG-01 High Quality Gun Mount

Fenix ALG-01 High Quality Gun Mount

6 in stock

The Fenix ALG-01 is a high quality gun mount for the Weaver/Picatinny type rail and fits a wide
range of Fenix torches.

[More details]
£12.95Add to Basket

Fenix AOF-L Filter

Fenix AOF-L Filter

10 in stock

These are accessories for Fenix torches which have outstanding filtration ability to create strong red/blue/green light. With high penetrability for fog and smoke, they can be used as a signal lamp, for hunting or to protect night vision as necessary. Uses a toughened ultra-clear glass lens with anti-reflective coating that provides heat resistance and maximum light penetrability.

[More details]
£7.95Add to Basket

Fenix AOD-M Diffuser

Fenix AOD-M Diffuser

For LD41, TK09 2016, TK15UE, TL15C, TK16, TK22, RC20, PD40 and More

10 in stock

The Fenix AOD-M diffuser is designed to fit a head diameter between 34 - 40 mm and converts your Fenix torch into a powerful and versatile 360 degree lantern and is compatible with the following models: LD41/LD41 2015, TK09 2016, TK10, TK11, TK12, TK15, TK15UE, TL15C, TK16, TK20, TK21, TK22, E40, E50, RC10, RC15, RC20, PD40

[More details]
£4.95Add to Basket

Fenix AOT-L Traffic Wand

Fenix AOT-L Traffic Wand

6 in stock

Fenix traffic wands can convert your torch into a glowing red high-visibility wand. Designed for emergency situations and traffic control.

[More details]
£4.95Add to Basket

(Avg rating from 2 reviews):  

You won't be disappointed
Sunday, 17 December 2017  | 

Took a star off for it being a little fiddly to fit correct in the holder with the charge pins aligned.

Fenix RC20
Saturday, 5 December 2015  | 

First rechargeable torch I've brought, although I have had led lenser's and magalites and other various well known brands before, this is by far the best I've used, only thing that could make this torch better is if it had a zoom but tbf it's that bright you don't really need one.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.