The Fenix FD45 is a compact and powerful torch from Fenix's premium focusing LED torch range, and delivers a maximum of 900 lumens output using a Cree XP-L HI neutral white LED which provides superior colour rendition.
A high efficiency TIR optical focusing lens offers a smooth beam that can be easily focused from a spot with spill light to a wide angle 94° flood light using the rotary focusing ring. The FD45 can produce a beam range of up to 330 metres as a spot light and up to 46 metres as a flood light when on the turbo setting.
Featuring five brightness levels and two flash settings, the FD45 is operated with the stainless steel button on the neck of the torch. Hold the button for 0.5 seconds to turn the light on and off. Once turned on each press will cycle through turbo, eco, low, mid and high. Hold the button for 1.2 seconds to access strobe and then single presses will change between strobe and SOS. Hold the button again to return to general brightness settings.
An intelligent memory function remembers the last setting used next time you turn the torch on, which is ideal if you have a prefered setting. The light can be put into lockout mode to prevent accidental activation when not in use by pressing the button twice within 0.5 seconds. Another useful feature is the low voltage warning function which will automatically step down the brightness is the battery voltage is not sufficient and it will begin to flash when you reach eco level to remind you to replace or recharge the batteries.
The FD45 can be powered by either four AA NiMH rechargeable batteries, which are recommended for the longest run-times, four AA alkaline non-rechargeable batteries or four Fenix ARB-L14-700U lithium-ion USB rechargeable batteries.
TIR optical focusing lens
Intelligent memory circuit
90° rotary focusing ring
Overheat protection, protects from high surface temperature
Low voltage warning function
Lock out mode
Reverse polarity protection, protects from improper battery installation
Turbo: 900 lumens; 1 hour, 30 minutes run-time; 330 m spot / 46 m flood beam range*
High: 350 lumens; 4 hours, 20 minutes run-time; 194 m spot / 28 m flood beam range
Mid: 150 lumens; 11 hours, 50 minutes run-time; 127 m spot / 18 m flood beam range
Low: 50 lumens; 29 hours, 50 minutes run-time; 80 m spot / 13 m flood beam range
Eco: 5 lumens; 160 hours run-time; 29 m spot / 8 m flood beam range
Strobe: 900 lumens
SOS: 50 lumens
Note: *Due to the overheat protection the torch will automatically reduce the output if the internal temperature reaches 55°C. Once the torch has cooled the brightness will increase again.
Tested to ANSI/PLATO FL1 standards using 4 x AA 2500 mAh NiMH batteries.
Important Battery and Battery Charger Information
Primary Cells - Please note that AA alkaline primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Focusing hand held LED torch
Operating Modes: Eco / Low / Mid / High / Turbo / Strobe / SOS
Luminous Flux: Up to 900 lumens
Lamp Type: Cree XP-L HI LED
Beam Range: Up to 330 m (spot) / 46 m (flood)
Batteries Required: 4 x AA alkaline/ NiMH or 4 x Fenix ARB-L14-700U
Run Time: Up to 160 hours on Eco
Overall Length: 121.8 mm
Head Diameter: 40 mm
Body Diameter: 39 mm
Weight: 206 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium
Body Finish: Premium type III hard-anodised anti-abrasive finish
Switch Type: Stainless steel side switch
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP68 standard (2 m)
Warranty: 5 years free repair, limited lifetime warranty
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix FD45 LED torch x 1
Lanyard x 1
Holster x 1
Spare O-ring x 1
Manual x 1