The Fenix FD30 is a compact and powerful torch from Fenix's premium focusing LED torch range, and delivers a maximum of 900 lumens output using a Cree XP-L HI LED.
A dual reflector allows the FD30 to offer a smooth beam that can be easily focused from a spot with spill light to a wide flood using the rotary focusing ring and provides a beam range of up to 200 metres as a spot light and up to 67 metres as a flood light.
Featuring five brightness levels and strobe mode, the FD30 is turned on and off with the tactical tail switch, that also offers a momentary function. Once the torch is on, the side switch will cycle through turbo, eco, low, mid, high with each press.
Strobe is activated by holding the side switch when the torch is turned on. A single press will return the torch to the previous brightness setting.
To prevent damage the FD30 has overheat protection that will automatically downshift the torch to the high brightness setting if the internal temperature exceeds 65°C. This can be overridden by selecting the turbo again, however this risks damaging the torch.
A low voltage function is programmed to downshift until the low brightness setting is reached, if the voltage drops below the preset level for the torch to remain in the higher outputs. The torch will then blink three times every five minuted to remind you to replace or charge the battery.
The FD30 can be powered by either one 18650 lithium-ion rechargeable battery or two non-rechargeable lithium metal batteries.
Side mode button and tactical tail switch
Dual reflector optical system
Intelligent memory circuit
360° rotary focusing technology
Digitally regulated output maintains constant brightness
Reverse polarity protection, protects from improper battery installation
Using 1 x Fenix 18650 3500 mAh battery:
Turbo: 900 lumens; 2 hours run-time*; 200 m spot / 67 m flood beam range
High: 350 lumens; 4 hours, 30 minutes run-time; 117 m spot / 43 m flood beam range
Mid: 150 lumens; 11 hours run-time; 77 m spot / 28 m flood beam range
Low: 50 lumens; 40 hours, 30 minutes run-time; 44 m spot / 16 m flood beam range
Eco: 8 lumens; 170 hours run-time; 17 m spot / 8 m flood bean range
Strobe: 900 lumens
Note: *The over-heat protection will drop the turbo brightness level into high brightness level if the internal temperature reaches 65°C, therefore the run-time is an estimated time.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Focusing hand held LED torch
Operating Modes: Eco / Low / Mid / High / Turbo / Strobe
Luminous Flux: Up to 900 lumens
Lamp Type: Cree XP-L HI LED
Beam Range: Up to 200 m (spot) / 67 m (flood)
Batteries Required: 1 x 18650 lithium-ion or 2 x CR123A lithium metal
Run Time: Up to 170 hours on eco
Overall Length: 140.5 mm
Head Diameter: 25.4 mm
Body Diameter: 23 mm
Weight: 96 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium
Body Finish: Premium type III hard-anodised anti-abrasive finish
Switch Type: Tactical tail cap switch and side mode switch
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP68 standard (2 m)
Warranty: 5 years free repair, limited lifetime warranty
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix FD30 LED torch x 1
Lanyard x 1
Holster x 1
Spare O-ring x 1
Spare switch boot x 1
Manual x 1