The Fenix E-LITE is a compact, light weight and durable unit that is ideally suited to close range lighting and visibility purposes.
It features a 150 lumen white torch output from a Match CA18 LED located on the front of the unit, with three outputs of low, mid and high available to suit varying situations. As well as the main white light the unit can also be used as a signal light and offers a secondary red light output and blue output via the two Everlight 2835 LEDs on the body of the torch under the button, that comprise of red constant, red flashing, blue constant and blue flashing.
The different colours can be useful in a number of applications, such as a rear safety light on the back of a backpack, hat, cycling jersey or saddle bag for aiding visibility to other road users on dark roads, or used as a signla light in law enforcement, search & rescue etc. for team member identification or position.
The lamp unit is versatile as it can be clipped on to the peak of a cap as a forward facing light, or it could just as easily be clipped onto a pocket, backpack, molle vest, the back of a cycling jersey or a saddle bag on the rear of the bike using the built-in clip on the light that features gripping groves for extra security.
A single button is located on the top of the light, which turns it on by holding down the button for over 0.5 seconds and the light will come on in white, with single presses cycling through the low, mid and high outputs. If you want to change to the auxiliary red/blue outputs, hold the button down for 1.2 seconds and the light will come on in red and cycle through red, red flash, blue and blue flash with each press.
To prevent accidental activation the E-LITE has an electronic lockout function that is accessed by two quick presses of the button while the light is off and the torch will blink twice to indicate it has entered lock-out mode.
It is powered by a built-in 275 mAh lithium polymer battery which is recharged via the USB-C port on the back of the light using the included USB-C to USB-A charging cable. simply lift the dust cover and insert the USB-C connector, then plug the other end into a USB power source. The indicator will go red while charging is in progress and turn green once charging is complete after approximately 1 hour, 30 minutes.
A built-in battery level indicator displays the battery status for 3 seconds when the button is single pressed with the light off. It will show either a solid green, green flashing, solid red or red flashing light. There is also a low battery voltage warning function is programmed to downshift to a lower brightness level when the voltage drops below the preset level. Once it reaches eco output it will blink red to remind you to charge the battery.
white, colour constant & colour flashing outputs
Built-in rechargeable lithium polymer battery
Integrated power indicator
lockout function to prevent accidental activation
Ultra lightweight with multiple uses
High: 150 lumens; 1 hour, 40 minutes run-time; 40 m beam range
Mid: 45 lumens; 4 hours, 20 minutes run-time; 22 m beam range
Low: 5 lumens; 20 hours run-time; 9 m beam range
Red Constant: 3 lumens; 8 hours run-time; 7 m beam range
Red Flashing: 3 lumens; 22 hours run-time; 7 m beam range
Blue Constant: 3 lumens; 8 hours run-time; 7 m beam range
Blue Flashing: 3 lumens; 22 hours run-time; 7 m beam range
Type: Versatile LED torch
Operating Modes: High / Mid / Low / Red Constant & Flash / Blue Constant & Flash
Luminous Flux: Up to 150 lumens
Lamp Type: Match CA18 white LED x 1 / Everlight 2835 red/blue LED x 2
Batteries Required: Built-in 275 mAh lithium polymer battery
Measurements: 52 x 23 x 20 mm
Weight: 18 g
Body Colour: Black
Body Material: Durable and sturdy PC material
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Water and dust resistant to IP66 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix E-LITE LED light x 1
USB-C to USB-A charging cable x 1
Key chain x 1
Manual x 1