The Fenix HL16 is a lightweight head torch specifically designed with children in mind for outdoor activities, but it is also great for parents to use too.
The child safe design has passed additional stringent CPSIA and Reach certifications for materials content and the battery compartment features a secure screw lock to prevent children accessing and removing the battery easily. It can only be opened by loosening the screw with the included allen key wrench, which parents can open to replace the battery. The screw can be permanently removed for adult use as the battery compartment still stays closed without the screw in place.
The HL16 uses a Cree XP-E2 R3 neutral white LED for better colour rendition and combined with the frosted lens provides softer lighting. A maximum output of 70 lumens is available on high and there is also mid and low white brightness levels. The head light also two side red LEDs that offer 1 lumen of constant red light or a flashing red light.
A single push button switch is located on the top of the head torch for easy operation. Turn the white LED on by holding the switch for 0.5 seconds and then each press after that will cycle through the modes. The last use white output will be remembered next time the light is turned on. Press and hold the button again to turn the torch off.
From the off position a single press will access the constant red output, a second press will enter red flash and the next press will exit the red mode. White light can be activated while in the red mode by holding the button down. The red light is perfect for preserving night vision, but also helps to easily locate children in dim lit areas or attract attention with the red flash.
Apart from being lightweight, the HL16 has a number of other features that make it great for running or other outdoor activities. The headband is comfortable and adjustable, but it also has a silicone strip on the inside that channels sweat and rain away from the eyes. On the outer part of the headband there are reflective strips, which are excellent for enhanced visibility.
The direction of the light can be altered with the hinged bracket that allows the torch to tilt forwards at a 60° angle and when the light is in the upright position a plastic lip sits over the button to prevent accidental activation of the light.
Built-in overheat protection will automatically reduce the output slighty if the temperature reaches 65°C, once the torch begins to cool the output will gradually increase.
It is recommended that the HL16 be powered by a single AA NiMH battery for the longest run-times, but it can also use a AA alkaline battery or Fenix's ARB-L14-1600U micro USB rechargeable lithium-ion battery. Please note that standard 14500 lithium-ion batteries are not compatible.
Product Features
Certified by CPSIA and REACH
Single switch for east operation
Digitally regulated output maintains constant brightness
Hinged bracket provides 60° tilt capability
Intelligent memory circuit remembers the last white brightness setting used
Reverse polarity protection, protects from improper battery installation
Operational Modes
Using 1 x AA alkaline battery:
Low: 4 lumens; 58 hours run-time; 8 m beam range
Mid: 30 lumens; 7 hours run-time; 24 m beam range
High: 70 lumens; 2 hours, 30 minutes run-time; 35 m beam range
Red: 1 lumens; 85 hours run-time
Red Flash: 1 lumens; 170 hours run-time
Using 1 x AA NiMH 2500 mAh battery:
Low: 4 lumens; 60 hours run-time; 8 m beam range
Mid: 30 lumens; 7 hours run-time; 24 m beam range
High: 70 lumens; 3 hours run-time; 35 m beam range
Red: 1 lumens; 75 hours run-time
Red Flash: 1 lumens; 150 hours run-time
Important Battery and Battery Charger Information
Primary Cells - Please note that AA alkaline primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Technical Details
Type: Lightweight LED head torch
Operating Modes: High / Mid / Low / Red / Red Flash
Luminous Flux: Up to 70 lumens
Lamp Type: Cree XP-E2 R3 LED / 2 x red LEDs
Beam Range: Up to 35 m
Batteries Required: 1 x AA alkaline (included) or 1 x AA NiMH or 1 x ARB-L14-1600U
Run Time: See information above
Measurements: 62 x 39.5 x 37 mm
Weight: 55 grams (excluding battery)
Body Material: Made from aircraft grade aluminium and quality plastics
Body Colour: Blue or pink
Switch Type: Single push button
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP66 standard
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix HL16 LED Head torch x 1
Spare O-ring x 1
Spare screw x 1
Allen key wrench x 1
AA alkaline battery x 1
Manual x 1