The Elwis Pro D4 is a dual function unit offering a front main light with 420 lumens maximum output from a 5 W COB LED and also offers a single 3 W SMD LED torch light with 80 lumens output.
The COB LED on the main body of the torch has a high colour rendering index (CRI ≥ 95+) and a colour temperature of 6000 K that provides a natural light colour. The high CRI means the beam resembles that of sunlight, making colours appear more clearly to the human eye and also reduces eye strain. This combined with the widespread light, thanks to the wide reflector, makes it perfect for up close inspection work such as painting, as the colours are seen more accurately.
The single LED in the head of the torch provides a more concentrated beam with spill light for tasks where focused light is required. The torch is operated with the push button on the back of the light, with each press the light cycles through the torch light, main light low, main light high and off.
Utilising a built-in rechargeable 18650 3.7 V 2600 mAh lithium-ion battery, the D4 provides a run-time of up to 2 hours, 30 minutes on the highest setting and is easily charged back up using the supplied USB charging cable. Simply pop open the rubber dust cover near the base and insert the cable into the micro USB port, then plug the USB end straight into a computer USB port, or into a USB mains/car adaptor. Three battery LED indicators will illuminate steadily to indicate that the unit is being charged and all three will go solid green when charging is complete. The charging time is approximately 4 hours.
Perfect for hands free use, the D4 can be stood up on it's base on a flat surface or it can be attached to metal surfaces with the strong magnet built into the base. The centre of the unit is hinged, allowing the long COB LED to be directed forwards or backwards within a 120° angle.
A low battery warning function will flash 5 times to notify the user that 5 minutes run-time is remaining and the torch requires charging. Four rubber bands are included so that you can customise your torch with a choice of yellow, green, purple or glow in the dark. The colours are good for differentiating between two torches if you and a friend have the same model and the glow in the dark band makes it useful for finding the torch at night.
Product Features
Strong magnet for hands free use
High CRI
Ultra strength TPE and ABS rubber housing and aluminium
Low battery warning function
Operational Modes
Main Light Low: 200 lumens; 6 hours run-time
Main Light High: 420 lumens; 2 hours, 30 minutes run-time
Torch Light: 80 lumens: 10 hours run-time
Technical Details
Operating Modes: Main light Low and High / Torch light
Luminous Flux: Up to 420 lumens
Lamp: 5 W COB LED x 1 (front) / 3 W SMD LED x 1 (torch)
Lens: Durable PC
Focus: Fixed
Batteries Required: 1 x built-in 18650 3.7 V 2600 mAh lithium-ion rechargeable battery
Run Time: Up to 10 hours (low)
Charge Time: 4 hours
Base Material: TPE rubber (thermoplastic elastomer) and ABS
Slimline Top Material: Aluminium
Measurements: 340 x 60 x 40 mm
Weight: 300 grams
Switch Type: Push button
Impact Resistance: IK07 (2 joules)
Operating Temperature: -10°C to +40°C
Environmental: Water resistant to IP52 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Elwis Pro D4 inspection light x 1
USB charging cable x 1
Coloured rubber bands x 4
Manual x 1
