The Elwis Pro D2 is a dual function unit offering a front main light with 250 lumens maximum output from 6 SMD LEDs and also a single LED torch light with 80 lumens output.
The 6 LEDs on the main body of the torch have a high colour rendering index (CRI ≥ 95+) and a colour temperature of 6000 K that provides a natural light colour. The high CRI means the beam resembles that of sunlight, making colours appear more clearly to the human eye and also reduces eye strain. This combined with the widespread light, thanks to the wide reflector, makes it perfect for up close inspection work such as painting, as the colours are seen more accurately.
The single LED in the head of the torch provides a concentrated beam with spill light for tasks where focused light is required.
The torch is operated with the rubberised push button on the back of the light, with one press turning the torch light on, a second press turning the main light on in low, third press steps up the brightness to high and fourth press turns the light off.
Utilising a built-in rechargeable 18650 3.7 V 2600 mAh lithium-ion battery, the D2 provides a run-time of up to 4 hours on the highest setting and is easily charged back up using the supplied USB charging cable. Simply pop open the rubber dust cover next to the power button and insert the cable into the micro USB port, then plug the USB end straight into a computer USB port, or into a USB mains/car adaptor. A red LED will illuminate to indicate that the unit is being charged and will go green when charging is complete. The charging time is approximately 3 hours and 30 minutes.
Featuring multiple ways for hands free use, the D2 has a strong magnet built into the back as well as a magnet in the base. The base of the torch is on a hinge, allowing the torch to be directed forwards or backwards within a 180° angle. There is also a hanging hook tucked away at the back of the torch that can be pulled out to hang the torch from a tent or tree branch.
A low battery warning function will flash 5 times to notify the user that 5 minutes run-time is remaining and the torch requires charging.
Strong magnet for hands free use
Integrated hanging hook
Ultra strength ABS housing
Low battery warning function
Main Light Low: 125 lumens: 8 hours run-time
Main Light High: 250 lumens: 4 hours run-time
Torch Light: 80 lumens: 10 hours run-time
Operating Modes: Main light / Torch light
Luminous Flux: Up to 250 lumens
Lamp: 1.2 W SMD LEDs x 6 (front) / 1 W white LED x 1 (torch)
Lens: Durable PC (front) / PMMA (torch)
Batteries Required: 1 x built-in 18650 3.7 V 2600 mAh lithium-ion rechargeable battery
Run Time: Up to 10 hours (torch)
Charge Time: 3 hours, 30 minutes
Body Material: High quality ABS, non rubberised
Measurements: 200 x 49 x 30 mm
Weight: 180 grams
Switch Type: Push button
Impact Resistance: IK07 (2 joules)
Operating Temperature: -10°C to +40°C
Environmental: Water resistant to IP54 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Elwis Pro D2 inspection light x 1
USB charging cable x 1
Manual x 1