The Elwis Pro D0 is a dual function unit offering a front main light with 140 lumens output from 6 SMD LEDs and also a single LED torch light with 100 lumens output.
The 6 LEDs on the main body of the torch have a high colour rendering index (CRI ≥ 95+) and a colour temperature of 6000 K that provides a natural light colour. The high CRI means the beam resembles that of sunlight, making colours appear more clearly to the human eye and also reduces eye strain. This combined with the widespread light, thanks to the wide reflector, makes it perfect for up close inspection work such as painting, as the colours are seen more accurately.
The single LED in the head of the torch provides a concentrated beam with spill light for tasks where focused light is required.
The torch is operated with the rubberised push button on top of the light, with one press turning the torch light on, a second press turning the main light one and the third press turns the light off.
Utilising a built-in rechargeable 14430 3.7 V 650 mAh lithium-ion battery, the D0 provides a run-time of up to 2 hours and 30 minutes in either setting and is easily charged back up using the supplied USB charging cable. Simply insert the cable into the micro USB port located near the pocket clip, then plug the USB end straight into a computer USB port, or into a USB mains/car adaptor. A red LED on the front of the torch will illuminate to indicate that the unit is being charged and will go green when charging is complete. The charging time is approximately 2 hours and 30 minutes.
Featuring multiple ways for hands free use, the D0 has a strong magnet built into the pocket clip which can also be used to attach over a pocket or belt.
Product Features
Strong magnet for hands free use
Integrated pocket clip
High CRI
Ultra strength ABS housing
Operational Modes
Main Light: 140 lumens: 2 hours, 30 minutes run-time
Torch Light: 100 lumens: 2 hours, 30 minutes run-time
Technical Details
Operating Modes: Main light / Torch light
Luminous Flux: Up to 140 lumens
Lamp: 1.2 W SMD LEDs x 6 (front) / 1 W white LED x 1 (torch)
Lens: Durable PC (front) / PMMA (torch)
Focus: Fixed
Batteries Required: 1 x built-in 14430 3.7 V 650 mAh lithium-ion rechargeable battery
Run Time: 2 hours, 30 minutes in either mode
Charge Time: 2 hours, 30 minutes
Body Material: High quality ABS, non rubberised
Measurements: 170 x 30 x 20 mm
Weight: 50 grams
Switch Type: Push button
Impact Resistance: IK07 (2 joules)
Operating Temperature: -10°C to +40°C
Environmental: IP20 (No water resistance)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Elwis Pro D0 inspection light x 1
USB charging cable x 1
Manual x 1