The Elwis Pro H3 is a compact and focusable LED head torch that offers a maximum output of 330 lumens from a 5 W Cree XPG2-R4 LED.
This light has the ability to be focused from a spot to flood beam, giving the user the flexibility to select the best focus for the task at hand. The wide beam profile provides a 1.4 metre diameter circle of light at 1 metres distance for excellent peripheral visibility, while the spot provides a tight 25 cm diameter of light from 1 metres distance.
A simple push button on the top of the head torch controls all functions. Press the button once to turn the light on in high and then again to change to low and a third time to turn it off. The light can also be turned off in either mode by holding the button down for two seconds, and the last used mode will be remember if the light is turned off in this way. This is useful if you are using low mode and want the light to turn back on in the low setting rather than the high.
The bezel of the torch if crenellated to protect the lens if the torch is dropped and can also be used to break glass in an emergency. A soft pad sits behind the torch for comfort whilst being worn on the head and the soft adjustable head band features a top strap for an extra secure fit. Cable clips on the headband keeps the cable to the battery pack tidy and out of your way.
It is powered by three AAA alkaline batteries that fit in the separate battery compartment that sits on the back of the headband. The head torch can run up to 30 hours on high power down to 1 lumen, or 1 hours, 30 minutes on high power down to 10% of maximum output. The head lamp can be tilted downwards so you can position the light where you need it.
Automatic temperature protection will reduce the light output if the headlamp becomes too warm after continuous use in order to protect the LED from overheating. Once the temperature drops the light output will increase again.
Product Features
Maneuverable head
Fully adjustable straps
Over the top head band strap
Temperature protection
Operational Modes
High: 330 lumens; 30 hours* / 1 hour, 30 minutes run-time**; 125 m beam range
Low: 110 lumens; 24 hours / 9 hours run-time**; 75 m beam range
* Down to 1 lumen
** Down to 10% of full output
Technical Details
Type: Professional head torch
Operating Modes: Low / High
Luminous Flux: Up to 330 lumens
LED: 5 W Cree XPG2-R4 LED
Colour Temperature: 7500 K
Beam Range: Up to 125 m
Run Time: Up to 30 hours in low setting (down to 1 lumen)
Focus: Spot to flood
Lens: Acrylic optical lens
Body Material: ABS and aluminium
Batteries Required: 3 x AAA alkaline batteries (included)
Weight: 145 grams (including batteries)
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Water resistant to IP44 standard
Operating Temperature: -5°C to +40°C
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Elwis Pro H3 head torch x 1
Duracell AAA alkaline battery x 3
User manual x 1
