The Elwis H200 is an LED head torch that has a spot beam from the 3 W LED and a flood beam from the 2 W COB LED. Both the high spot beam and the flood beam separately produce 200 lumens output.
This light has two spot beam outputs, a flood beam output and also a red output, giving the user the flexibility to select the best lighting for the task at hand. The flood beam profile provides a 500 cm area of light at 1 metres distance for peripheral visibility, while the spot provides a 20 cm diameter of light from 1 metres distance.
The red light output is useful for a range of tasks including astronomy, map reading, animal observation and night reading, as well as preserving your natural night vision.
The head torch is operated with a pressure sensitive switch that is activated by softly touching in the indented area. Each press will cycle through the outputs starting with spot high, spot low, flood, red and then off.
A soft pad sits behind the torch for comfort whilst being worn on the head and the soft adjustable head band features a top strap for an extra secure fit.
It is powered by three AAA alkaline batteries that fit into the headlamp unit, thus reducing the weight on the back of the head and removing the need for cables attaching to the headband, by popping open the back cover. The head torch can run up to 3 hours, 30 minutes on high spot down to 10% of maximum output. The head lamp can be tilted downwards within an 90° angle so you can position the light where you need it.
Spot and flood settings
Fully adjustable straps
Over the top head band strap
Spot High: 200 lumens; 3 hours, 30 minutes; 50 m beam range*
Spot Low: 100 lumens; 9 hours
Flood: 200 lumens output; 6 hours run-time*
* Down to 10% of full output
Type: Professional head torch
Operating Modes: Spot High / Spot Low / Flood / Red
Luminous Flux: Up to 200 lumens
LED: 3 W LED / 2 W COB LED
Colour Temperature: 7500 K
Beam Range: Up to 50 m
Run Time: Up to 9 hours in low setting (down to 10% output)
dimensions: 38 x 62 x 46 mm
Focus: Fixed, but with spot and flood settings
Body Material: ABS
Batteries Required: 3 x AAA alkaline batteries (included)
Weight: 106 grams (including batteries)
Switch Type: soft touch button
Impact Resistance: 1 m
Environmental: Water resistant to IP44 standard
Operating Temperature: -5°C to +40°C
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Elwis H200 head torch x 1
AAA alkaline battery x 3
User manual x 1