Nitecore P20 V2 LED Torch
Nitecore P20 V2 LED TorchNitecore P20 V2 LED TorchNitecore P20 V2 LED Torch
Nitecore P20 V2 LED TorchNitecore P20 V2 LED TorchNitecore P20 V2 LED Torch

Nitecore P20 V2 LED Torch

Brand:  Nitecore
Product Code:  P20-V2

Availability:  

3 in stock
 
max allowance of 10 characters
£71.95

The Nitecore P20 V2 upgrades the original, now with a Cree XP-L2 V6 LED that produces a maximum output of 1100 lumens when using two CR123A non-rechargeable batteries or 1000 lumens when using an 18650 lithium-ion rechargeable battery.

Designed for tactical applications, the P20 V2 features a crenellated strike bezel that has strengthened tips with hard silicon nitride ceramics to enable excellent glass breaking performance.

It also features the upgraded 2nd generation Strobe Ready™ dual button interface, that has a strobe ready pedal design inset into the tail cap more to prevent accidental activation, while still enabling fast and easy access to the strobe in any mode even when wearing gloves, making it a perfect tactical torch with true single handed operation.

Three selectable modes of operation allow the user to define the user interface:

Tactical (mode 1): Strobe / High
Law Enforcement (mode 2): Strobe / High / Mid (200 lumens)
Daily (mode 3): Strobe / High / Mid (370 lumens) / Low

To change between the modes first ensure the P20 V2 is turned off and loosen head. Then hold down the Strobe Ready™ button while simultaneously tightening the head. The LED indicator on the tail will then indicate the selected mode by flashing once for tactical mode, twice for law enforcement mode and three times for daily mode.

The circular button turns the torch on/off with a full click, or half pressing the button will provide momentary illumination until the button is released. With the light off the strobe can be instantly accessed for momentary operation by holding down the Strobe Ready™ mode button and will turn off when the button is released.

When in mode 1 the torch will always turn on in high and a single press of the mode button will change between high and strobe. In mode 2 the torch will always turn on in high, and single presses of the mode button will change between high / mid, and the strobe is accessed with a long press of the mode button. In mode 3 single presses of the mode button will cycle through low, mid, high and a long press will access the strobe. The last used setting in mode 3 will be memorised next time the torch is turned on.

A built in LED on the tail cap switch indicates the remaining battery power when the battery is first inserted by flashing 3 times for above 50% power, twice for below 50% power and once to indicate the battery is near depletion.

The included NTH20 tactical holster is made from sturdy plastic that keeps the torch in place and allows for immediate quick draw when required without having to lift a flap up first, and provides a convenient way for carrying your torch as it has an adjustable stopper on the clip making it compatible with belts between 1.25 and 2.25 inches, in 0.25 inch increments. Also included is a stainless pocket clip for easy attachment to a pocket, back pack or molle vest.

Product Features

Dual-switch tail cap designed for tactical use and easy application
Strike bezel with strengthened silicon nitride ceramic tips
Strobe ready™ button for quick access to Strobe mode
Three selectable modes brings flexibility in operation
Integrated LED on tail switch to indicate remaining battery power
Optical lenses with double sided anti-scratch coating
Anti-rolling design to provide a firm grip
Titanium coated stainless steel clip and NTH20 holster

Operational Modes

Using 1 x Nitecore 3500 mAh lithium-ion battery:
High: 1000 lumens; 3 hours run-time; 206 m beam range*
Mid (Mode 3): 370 lumens; 7 hours run-time; 122 m beam range*
Mid (Mode 2): 200 lumens; 18 hours run-time; 93 m beam range
Low: 60 lumens; 11 hours, 55 minutes run-time; 54 m beam range
Strobe: 1000 lumens

Using 2 x CR123A lithium metal (approx. 1700 mAh) batteries:
High: 1100 lumens; 1 hour run-time; 222 m beam range*
Mid (Mode 3): 370 lumens; 2 hours run-time; 122 m beam range*
Mid (Mode 2): 200 lumens; 3 hours run-time; 93 m beam range
Low: 60 lumens; 14 hours run-time; 54 m beam range
Strobe: 1100 lumens

Note: *As this is a high drain device, when in high or mid mode for over 2.5 minutes the P20 V2 will automatically to avoid overheating and prolong the lifespan of the battery, therefore this is an accumulated run-time.

Tested to ANSI/PLATO FL1-2019 standards in laboratory conditions. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Professional easy carry LED torch
Operating Modes: High / Mid / Low / Strobe
Luminous Flux: Up to 1100 lumens
Lamp Type: Cree XP-L2 V6 LED
Beam Range: Up to 222 m
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion (not included)
Overall Length: 149.4 mm
Head Diameter: 31.8 mm
Barrel Diameter: 25.4 mm
Tail Diameter: 26 mm
Weight: 135 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Dual switch
Impact Resistance: 1 m
Environmental: Dust and water proof to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in a retail box and contains:
Nitecore P20 V2 LED torch x 1
Pocket clip x 1
NTH20 holster x 1
Lanyard x 1
Spare O-ring x 1
CR123A battery magazine x 1
Manual x 1

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Single use non rechargeable cells

53 in stock

Due to shipping regulations these batteries can only be shipped to the Mainland UK, unless sent with a compatible torch & in no quantity higher than 4 individual cells.

[More details]
£3.95Add to Basket

Nitecore 18650 3.7 V, 2600 mAh Lithium-ion Protected Battery (NL1826)

Nitecore 18650 3.7 V, 2600 mAh Lithium-ion Protected Battery (NL1826)

71 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£9.95Add to Basket

Nitecore 3200 mAh 18650 Lithium-ion Protected Battery (NL1832)

Nitecore 3200 mAh 18650 Lithium-ion Protected Battery (NL1832)

40 in stock

The Nitecore NL1832 is a rechargeable 18650 lithium-ion battery with a capacity of 3200mAh, and replaces the Nitecore NL188 while still offering the same technical specifications.

[More details]
£15.95Add to Basket

Nitecore 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery (NL1835)

Nitecore 18650 3.6 V, 3500 mAh Lithium-ion Protected Battery (NL1835)

88 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£19.95Add to Basket

Nitecore UI1 Single Bay Li-ion Battery Charger

Nitecore UI1 Single Bay Li-ion Battery Charger

Charges Li-ion/IMR batteries

3 in stock

The Nitecore UI1 is a lithium-ion and IMR battery charger with a single charging bay.

[More details]
£11.45Add to Basket

Nitecore UI2 Dual Bay Li-ion Battery Charger

Nitecore UI2 Dual Bay Li-ion Battery Charger

Charges Li-ion/IMR batteries

5 in stock

The Nitecore UI2 is a lithium-ion and IMR battery charger with a two independent charging bays.

[More details]
£17.45Add to Basket

Nitecore Intellicharger i1 Single Bay  / Vapor Charger

Nitecore Intellicharger i1 Single Bay / Vapor Charger

Capable of charging Li-ion/IMR batteries and E-cigerettes

3 in stock

The Nitecore i1 battery charger is new for 2015 and has a single charging bay suitable for charging Lithium-ion and IMR batteries. It also features a EGO port designed for charging E-cigarettes / vaporizers. Compatible with and identifies the following rechargeable batteries: Li-ion/IMR 26650, 18650, 18490, 17670, 17500, 17335, 16340 (RCR123), 14500 and 10440

[More details]
£19.95Add to Basket

Nitecore GM02 Gun Mount

Nitecore GM02 Gun Mount

Fits 25.4 mm torch barrel diameter

4 in stock

The GM02 is machined to perfection from aircraft grade aluminum alloy and is hard anodised for durability. Compatible with the following Nitecore torches; The Precise series, the Chameleon series, SRT7, SRT6, MT2C, MT25, MT26, MT40, MH2C, MH25, MH27 and MH40. Also compatible with any torch barrels with 25.4 mm (1 inch) diameter.

[More details]
£15.95Add to Basket

Nitecore GM06 Gun Mount

Nitecore GM06 Gun Mount

Fits 25.4 mm torch barrel diameter

5 in stock

The GM06 is a gun mount designed to secure your tactical torch to guns with a picatinny rail mount.

[More details]
£9.95Add to Basket

Nitecore NBM40 18650 4 Cell Battery Holder

Nitecore NBM40 18650 4 Cell Battery Holder

4 in stock

Carrying and storing your 18650 lithium-ion batteries has never been easier with the Nitecore NBM40 battery holder. It can comfortably store four 18650 batteries, which are simply just pushed into the flexible storage holes. The environmentally friendly vapour-phase gum material makes it easy to get your batteries in and out of the carrier, yet it is also strong and durable.

[More details]
£6.95Add to Basket

Nitecore HRM2 Helmet Mount

Nitecore HRM2 Helmet Mount

Fits 25.4 mm torch barrel diameter

4 in stock

The Nitecore HRM2 helmet mount is designed to attach torches with a body diameter of 25.4 mm (1 inch) to a helmet or hard hat, and it fits most helmets and hardhats up to 12 mm thickness.

[More details]
£13.95Add to Basket

Be the first to Write a Review for this item!

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd
Customers Who Bought This Item Also Bought