Fenix UC35 V2.0 Rechargeable LED Torch
Fenix UC35 V2.0 Rechargeable LED TorchFenix UC35 V2.0 Rechargeable LED TorchFenix UC35 V2.0 Rechargeable LED Torch
Fenix UC35 V2.0 Rechargeable LED TorchFenix UC35 V2.0 Rechargeable LED TorchFenix UC35 V2.0 Rechargeable LED Torch

Fenix UC35 V2.0 Rechargeable LED Torch

  (Avg rating from 3 reviews)
Brand:  Fenix
Product Code:  UC35-V2.0

Availability:  

4 in stock
Fenix 3500 mAh lithium-ion battery included
 
max allowance of 20 characters
£89.95

The Fenix UC35 V2.0 rechargeable LED torch is the updated version of the popular UC35.

It has had an update in lumen output from 960 lumens to 1000 lumens in turbo mode, but the biggest improvement is the beam range which now reaches an impressive 266 metres, which is an increase of 66 metres, all thanks to the addition of the Cree XP-L HI V3 LED.

The included Fenix 18650 3500 mAh lithium-ion battery is charged inside the torch with the supplied micro USB cable. Remove the dust cover from the micro USB port, located on the neck of the torch, and plug the cable into the torch one end and the other end into a computer/laptop or a suitable USB mains/car adaptor (sold separately).

An LED indicator inside the switch will go red to indicate charging is in progress and will turn green once charging is complete. The charging time for the included 3500 mAh capacity battery is approximately 3 hours, 30 minutes.

Five brightness levels, plus strobe mode are available and operated with the tactical tail switch and side functional switch. The UC35 V2.0 is turned on and off with the tactical tail switch by fully pressing it down, and it also offers a momentary function by half pressing the button (the light will turn off when the button is released). Once the torch is on, the side switch will cycle through turbo, moonlight, low, mid, high with each press.

Strobe is activated by holding the side switch for 0.5 seconds when the torch is turned on. A single press will return the torch to the previous brightness setting.

The switch features a built-in battery indicator that displays the battery status for 3 seconds every time the torch is turned on when using an 18650 battery. A solid green light indicates saturated, flashing green is sufficient, solid red is poor and flashing red is critical. The battery indicator also acts as a low voltage warning light while the torch is in use when using an 18650 battery.

The overheat protection will automatically reduce the turbo lumen output if the temperature of the torch reaches 60°C or above in order to protect the LED from overheating. Once the torch has cooled to below 60°C the output will gradually increase again.

When using an 18650 battery, if the battery voltage drops below 3 V the torch is programmed to downshift to a lower brightness level until moonlight output is reached, at which point the battery indicator will flash red to remind you to charge the battery.

Product Features

Digitally regulated output to maintain constant brightness
Low voltage warning function and battery status indicator
Intelligent memory function
Reverse polarity protection
Over heat protection
Tactical tail switch and side mode switch

Operational Modes

Moonlight: 1 lumen; 800 hours run-time; 10 m beam range
Low: 50 lumens; 28 hours, 10 minutes run-time; 64 m beam range
Mid: 150 lumens; 10 hours, 40 minutes run-time; 98 m beam range
High: 350 lumens; 4 hours, 10 minutes run-time; 160 m beam range
Turbo: 1000 lumens; 2 hours, 15 minutes run-time; 266 m beam range*
Strobe: 1000 lumens

Tested to ANSI/PLATO FL1 standard using 1 x Fenix ARB-L18-3500 18650 lithium-ion rechargeable battery. Results may vary between torch, battery and environments.


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - This torch is supplied with a lithium-ion rechargeable battery and a USB charging cable. Mains and car USB adaptors can be purchased separately.

Please click on the Product Accessories tab above to view compatible batteries and USB adaptors.


Technical Details

Type: Hand held rechargeable LED torch
Operating Modes: Moonlight / Low / Mid / High / Turbo / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: Cree XP-L HI V3 LED
Beam Range: 266 m
Batteries Required: 1 x 18650 lithium-ion rechargeable (included) / 2 x CR123A non-rechargeable
Run Time: Up to 800 hours (moonlight setting)
Overall Length: 140 mm
Head Diameter: 25.4 mm
Body Diameter: 23.5 mm
Weight: 89 grams (excluding battery)
Body Colour: Black
Body Material: High strength and oxidation resistant aluminium
Body Finish: Premium type III hard anodised anti-abrasive finish
Window Type: Toughened ultra-clear glass lens with anti-reflective coating
Reflector: Smooth for excellent beam throw
Switch Type: Tactical tail switch and side mode switch
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP68 Standard (2 m)
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Fenix UC35 V2.0 LED torch x 1
Holster x 1
Lanyard x 1
Fenix ARB-L18 3500 mAh lithium-ion battery x 1
Spare rubber switch x 1
Micro USB charge cable x 1
Spare O-ring x 2
Manual x 1

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

77 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£11.95Add to Basket

Fenix 18650 USB Rechargeable 2600 mAh Li-ion Protected Battery

Fenix 18650 USB Rechargeable 2600 mAh Li-ion Protected Battery

This battery can be charged via the built-in Micro USB port or in a Fenix battery charger

9 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£13.95Add to Basket

Fenix 18650 USB Rechargeable 3500 mAh Li-ion Protected Battery

Fenix 18650 USB Rechargeable 3500 mAh Li-ion Protected Battery

This battery can be charged via the built-in Micro USB port or in a Fenix battery charger

38 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£20.95Add to Basket

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

14 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Fenix Quick Release Bike Mount

Fenix Quick Release Bike Mount

4 in stock

The Fenix ALB-10 is a versatile quick release bike mount which enables the fitting of a torch to your bike handlebars. The mount can hold torches with a body diameter of 18-26 mm and fits on handlebars with a diameter of 22-35 mm. Horizontal adjustment of 30 degrees left or right is also possible.

[More details]
£14.95Add to Basket

Fenix AOD-S Diffuser

Fenix AOD-S Diffuser

10 in stock

The Fenix AOD-S diffuser is designed to fit a wide range of Fenix torches and converts your Fenix torch into a powerful and versatile 360 degree lantern and is compatible with the following models: P1D, P2D, PD10, PD20, PD22, PD30, PD31, PD32, PD35, L1, L1P, L2P, L1S, L2S, L1T, L2T, L1D, L2D, LD10, LD20, LD22, LD25, E20, E21, E25, E35.

[More details]
£4.95Add to Basket

Fenix AOT-S Traffic Wand

Fenix AOT-S Traffic Wand

7 in stock

Fenix traffic wands can convert your torch into a glowing red high-visibility wand. Designed for emergency situations and traffic control.

[More details]
£4.95Add to Basket

Fenix AOF-S+ Filter

Fenix AOF-S+ Filter

11 in stock

These are accessories for Fenix torches which have outstanding filtration ability to create strong red/blue/green light. With high penetrability for fog and smoke, they can be used as a signal lamp, for hunting or to protect night vision as necessary. Uses a toughened ultra-clear glass lens with anti-reflective coating that provides heat resistance and maximum light penetrability.

[More details]
£4.95Add to Basket

Storacell 18650 4 Cell Battery Holder

Storacell 18650 4 Cell Battery Holder

19 in stock

Organise and store your 18650 batteries in this Storacell hard plastic caddy. These holders were originally designed for pilots, but they are also great for camping, boating, travel or at home.

[More details]
£5.95Add to Basket

Fenix AER-02 V2.0 Tactical Remote Pressure Switch

Fenix AER-02 V2.0 Tactical Remote Pressure Switch

3 in stock

The Fenix AER-02 V2.0 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch.

[More details]
£21.95Add to Basket

(Avg rating from 3 reviews):  

Rating:  
Incredible
Sunday, 8 September 2019  | 

I purchased this torch for inspection work. It has an incredible light, even on the setting below turbo. Light yet comfortable to hold and use. Very effective usb charging. Would recommend this to anyone in the market for a light yet powerful torch.


Rating:  
Fenix U35 V2
Sunday, 26 May 2019  | 

Fantastic torch very well built great functions and comes with an 18650 battery bought for my son who’s in the Police he says it perfect for what he needs it for.


Rating:  
A great & bright little flashlight
Monday, 8 April 2019  | 

There is not a lot other than to say the brightest surprise I have ever had! Extremely powerful, well made and not a thing that disappointed me. Great service and professional advice from Stewart of Torch Direct so thank you!

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd