Fenix PD32 V2.0 LED Torch
Fenix PD32 V2.0 LED TorchFenix PD32 V2.0 LED TorchFenix PD32 V2.0 LED Torch
Fenix PD32 V2.0 LED TorchFenix PD32 V2.0 LED TorchFenix PD32 V2.0 LED Torch

Fenix PD32 V2.0 LED Torch

Brand:  Fenix
Product Code:  PD32-V2.0

Availability:  

3 in stock
 
max allowance of 20 characters
£69.95

The Fenix PD32 V2.0 is a compact and lightweight LED torch that delivers 1200 lumens maximum output from the OSRAM KW CSLPM1.TG LED. It is powered by either two non rechargeable CR123A lithium metal batteries or one rechargeable 18650 lithium-ion battery (not included).

With a maximum beam distance of 395 metres in a compact package, the PD32 V2.0 LED torch is ideal for dog walkers who appreciate a lighter torch with great beam distance, but equally is great for tactical operations or hunting as it is compatible with the ALG-00 gun mount and AER-02 V2.0 pressure switch.

Offering three brightness levels and strobe, the torch is operated using the tactical tail button. The light is turned on and off by fulling clicking the tail switch or momentary illumination can be achieved by half pressing the tail button while the light is off. With the light turned on half presses of the button will cycle through low, mid and high. The last used brightness level will be memorised for when the light is next turned on. Holding the button for 0.5 seconds in any state will access the strobe setting and one press of the button will revert back to the previous brightness level.

A battery level indicator will automatically display the battery status each time the torch is turned on if you are using a 18650 lithium-ion battery. Constant green indicates a full charge, green flashes is sufficient charge, red constant is poor battery level and red flashes indicates critical battery level.

When using an 18650 battery, if the battery voltage drops below the preset level, the PD32 V2.0 is designed to downshift in brightness level until the low output is reached. When low is reached the torch will flash 3 times every 5 minutes to remind you to charge or replace the battery.

The intelligent over-heat protection will drop the high brightness level if the internal temperature reaches 60°C or above. When the temperature has reduced the light will automatically go back up to full brightness. This is to protect the LED from damage and prevent the surface temperature from becoming too high.

Operational Modes

Low: 30 lumens, 82 hours run-time; 55 m beam range
Mid: 350 lumens, 5 hours, 20 minutes run-time; 218 m beam range
High: 1200 lumens, 2 hours, 40 minutes run-time; 395 m beam range*
Strobe: 1200 lumens

Note: *The high mode is measured at total run-time including any reduced output levels due to the temperature regulation design.

Tested in laboratory conditions to ANSI/PLATO FL1 standard using 1 x Fenix 3500 mAh 18650 lithium-ion rechargeable battery under the temperature of 21±3°C and humidity of 50% - 80%. Results may vary between torch, battery and environments.


Important Battery and Battery Charger Information

Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.

Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.

Please click on the Accessories tab above to view compatible batteries and battery chargers.


Technical Details

Type: Hand-held LED torch
Operating Modes: High / Mid / Low / Strobe
Luminous Flux: Up to 1200 lumens
LED Type: OSRAM KW CSLPM1.TG LED
Beam Range: 395 m
Batteries Required: 2 x CR123A  non-rechargeable lithium metal / 1 x rechargeable 18650 lithium-ion (not included)
Overall Length: 129.4 mm
Head Diameter: 25.4 mm
Body Diameter: 23.6 mm
Weight: 82 grams (excluding battery)
Body Colour: Black
Body Material: High strength and oxidation resistant 6061 aluminium
Body Finish: Premium type HAIII hard anodised anti abrasive finish
Switch Type: Tail switch and side mode switch
Impact Resistance: 1 m
Environmental: Waterproof and dust resistant to IP68 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Fenix PD32 V2.0 LED torch x 1
Pocket clip x 1
Holster x 1
Lanyard x 1
Spare O-ring x 1
Manual x 1

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Energizer CR123A 3 V Lithium Battery (Pack of 2)

Single use non rechargeable cells

53 in stock

Due to shipping regulations these batteries can only be shipped to the Mainland UK, unless sent with a compatible torch & in no quantity higher than 4 individual cells.

[More details]
£3.95Add to Basket

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 2600 mAh Li-ion Protected Battery

77 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£11.95Add to Basket

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

Fenix 18650 3.6 V, 3500 mAh Li-ion Protected Battery

78 in stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]
£19.95Add to Basket

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Fenix ARE-X1 Single Bay Lithium-ion Battery Charger

Features Power Bank Function

7 in stock

The Fenix ARE-X1 is a lithium-ion battery charger with a single charging bay. It is suitable for charging one 18650 or one 26650 lithium-ion battery and is supplied with a USB charging cable.

[More details]
£11.95Add to Basket

Fenix ARE-X1 Charger and 18650 2600 mAh Li-ion Battery Set

Fenix ARE-X1 Charger and 18650 2600 mAh Li-ion Battery Set

Also functions as a Power Bank - Ideal for charging many USB devices

9 in stock

This charging set includes the Fenix ARE-X1 lithium-ion battery charger with a single charging bay and the Fenix ARB-L18-2600 18650 2600 mAh lithium-ion battery.

[More details]
£23.95Add to Basket

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

Fenix ARE-X2 Dual Bay Lithium-ion/NiMH Battery Charger

This model also features a USB port output, enabling you to charge phones, etc.

10 in stock

The Fenix ARE-X2 is a dual bay battery charger capable of charging lithium-ion, NiMH and NiCd type batteries. Compatible with the following batteries: Lithium-ion: 26650, 18650, 16340/RCR123A, 14500 and 10440. NiMH/NiCd: AA, AAA

[More details]
£19.95Add to Basket

Fenix ARE-D1 Single Bay Li-ion Battery Charger

Fenix ARE-D1 Single Bay Li-ion Battery Charger

Compatible with Li-ion & NiMH/Ni-Cd batteries
Features a power bank function for charging external devices

14 in stock

The Fenix ARE-D1 is a lithium-ion and NiMH smart multi charger with a single charging bay, and features a digital display and a power bank function.

[More details]
£15.95Add to Basket

Fenix ARE-D2 Dual Bay Li-ion Battery Charger

Fenix ARE-D2 Dual Bay Li-ion Battery Charger

Compatible with Li-ion & NiMH/Ni-Cd batteries
Features a power bank function for charging external devices

3 in stock

The Fenix ARE-D2 is a lithium-ion and NiMH smart multi charger with a two independent charging bays, and features a digital display and a power bank function.

[More details]
£28.95Add to Basket

Fenix ARE-A2 Dual Bay Li-ion/NiMH Battery Charger

Fenix ARE-A2 Dual Bay Li-ion/NiMH Battery Charger

Charges lithium-ion and NiMH/NiCd type batteries.

8 in stock

The Fenix ARE-A2 is the replacement for the best selling ARE-C1+ and has now been upgraded to be able to charge 21700 lithium-ion batteries as well as the same batteries as before. It features two independent charging channels capable of charging a range of lithium-ion and NiMH/NiCd batteries.

[More details]
£27.95Add to Basket

Fenix AOD-S Diffuser

Fenix AOD-S Diffuser

10 in stock

The Fenix AOD-S diffuser is designed to fit a wide range of Fenix torches and converts your Fenix torch into a powerful and versatile 360 degree lantern and is compatible with the following models: P1D, P2D, PD10, PD20, PD22, PD30, PD31, PD32, PD35, L1, L1P, L2P, L1S, L2S, L1T, L2T, L1D, L2D, LD10, LD20, LD22, LD25, E20, E21, E25, E35.

[More details]
£4.95Add to Basket

Fenix AOT-S Traffic Wand

Fenix AOT-S Traffic Wand

7 in stock

Fenix traffic wands can convert your torch into a glowing red high-visibility wand. Designed for emergency situations and traffic control.

[More details]
£4.95Add to Basket

Fenix AOF-S+ Filter

Fenix AOF-S+ Filter

11 in stock

These are accessories for Fenix torches which have outstanding filtration ability to create strong red/blue/green light. With high penetrability for fog and smoke, they can be used as a signal lamp, for hunting or to protect night vision as necessary. Uses a toughened ultra-clear glass lens with anti-reflective coating that provides heat resistance and maximum light penetrability.

[More details]
£4.95Add to Basket

Fenix Torch Rotary Belt Clip

Fenix Torch Rotary Belt Clip

5 in stock

The Fenix 360 degree The Fenix AB02 rotary clip is suitable for all Fenix LD, PD and 2 x CR123 / 1x 18650 powered TK series torches.

Please Note: A torch is not included with this item

[More details]
£9.95Add to Basket

Fenix Spare Holster for the PD35 Model

Fenix Spare Holster for the PD35 Model

8 in stock

This is a spare holster for the following Fenix torch models: PD35.

[More details]
£4.45RRP: £4.50Add to Basket

Fenix AER-02 V2.0 Tactical Remote Pressure Switch

Fenix AER-02 V2.0 Tactical Remote Pressure Switch

3 in stock

The Fenix AER-02 V2.0 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch.

[More details]
£21.95Add to Basket

Be the first to Write a Review for this item!

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd
Customers Who Bought This Item Also Bought