A fantastic dive torch that provides an excellent output, featuring a single switch for easy operation.
Supplied in a soft nylon carry case, the D26 includes the following main items:
D26 LED diving torch
Xtar 18650 3400 mAh battery
ANT MC1 Plus battery charger
UK mains adaptor
Car charger adapter
More information about the D26 LED Torch
The Xtar D26 is a dive torch with a fantastic 1100 lumen output on maximum setting using a Cree XM-L2 U3 LED.
It can work to a depth of 100 metres and has an on land beam range of 310 metres.
Powered by either one 18650 lithium-ion battery, one 18700 lithium-ion battery or one 26650 lithium-ion battery. The supplied battery tube needs to be removed from the battery compartment area if you wish to use a 26650 lithium-ion battery.
The switch features a dial that has a padlock symbol to indicate the torch is locked. To use the torch simply turn the dial to face the unlocked padlock and press the button in. Each press will cycle through the brightness settings as follows; high, turbo, mid, low. Hold the switch for 1.5 seconds to turn the torch off.
An LED power indicator just above the power switch lets you know when your battery is running low. Above 25% power the light will be green, between 5%-25% the light will go red and below 5% the red light will flash.
A single 18650 3400 mAh lithium-ion battery is supplied, and can be easily recharged in the provided MC1 Plus single bay charger. There is also a UK mains adaptor and a car charger adaptor for charging on the go.
The soft nylon carry case makes transporting the D26 with accessories easy and even has room for any extra small accessories you may need to take with you on your diving trip.
Turbo: 1100 lumens; 2 hours run-time
High: 600 lumens; 3 hours, 36 minutes run-time
Mid: 200 lumens; 11 hours run-time
Low: 60 lumens; 48 hours run-time
Tested to ANSI standards using 1 x 18650 3400 mAh lithium-ion battery. Parameters may vary between torches, chargers, batteries and environements.
Type: Diving torch
Operating Modes: Variable output using sliding switch
Luminous Flux: Up to 1100 lumens
Lamp Type: Cree XM-L2 U3 LED
Beam Range: 310 m (on land)
Batteries Required: 1 x 18650 (included) or 1 x 18700 / 1 x 26650
Run Time: Up to 48 hours on lowest setting
Overall Length: 155 mm
Head Diameter: 46 mm
Barrel Diameter: 33 mm
Weight: 248 grams (excluding battery)
Body Colour: Black
Body Material: 6N01 aircraft-grade aluminium alloy
Body Finish: Type III hard anodised anti-abrasive finish
Switch Type: Push button magnetic induction switch
Impact Resistance: 1.5 m
Environmental: Waterproof to 100 metres
Warranty: 2 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Soft nylon carry case x 1
D26 LED dive torch x 1
ANT MC1 Plus charger (with USB cable) x 1
UK mains adaptor x 1
Car charger adaptor x 1
Xtar 3400 mAh lithium-ion battery x 1
Lanyard x 1
O-ring x 2
Warranty card x 1
Manual x 1