The Xtar VP1 lithium-ion battery charger has two independent charging bays for 14500, 14650, 17670, 18500, 18650, 18700, 10440, LIR123A, RCR123 and 16340 lithium-ion type batteries.
A choice of charging currents are available to suitable individual battery requirements, the modes are easily selected using the push button switch on the charging unit, just push the button to cycle through the modes until you arrive at the charging mode you wish to use.
The Xtar VP1 also features an LCD display which provides battery voltage and other charging status information, the charger can also recover and reactivate over discharged protected battery cells.
The VP1 has built-in short circuit and reverse polarity protection.
For charging 3.6 V or 3.7 V (nominal voltage) lithium-ion batteries only.
Supplied with a UK mains adaptor and 12 volt car charger adaptor.
Note: Always use in accordance with instruction manual and read before first use.
Two independent charging bays
LCD screen that provide charging status information
Selection of charging currents (0.25 A, 0.5 A and 1 A)
Function for activating over discharged batteries, the VP1 can recover over discharged protected batteries
Soft start function avoids damage from a large current surge
Algorithm (CC.CV) charging system
Reverse-polarity protection circuit board
Short circuit protection
Operation Temperature: Room temperature 0 to 40 °C
UK Mains Adaptor Input: 100-240 V ac, 50/60 Hz
Input Voltage: 12 V dc 1000 mA
0.25 A CC: 250 mA ±30 mA
0.5 A CC: 500 mA ±50 mA
1.0 A CC: 1000 mA ±80 mA
Cut-off Voltage: 4.2 V dc ±0.05 V
Detection precision: ±0.03 V
Dimensions: 118 mm (L) x 62 mm (W) x 34 mm (H)
Weight: 95 grams
Packaging and Contents
Supplied in retail packaging and includes:
Xtar VP1 dual bay charger x 1
UK mains adaptor x 1
12 volt car adaptor x 1
1. Charge only rechargeable lithium-ion batteries
2. Charging any other types of batteries may cause them to leak rupture or explode.
3. Do not disassemble or modify any part of the charger or use as a power source.
4. Always unplug the charger from outlet before attempting maintenance or cleaning.
5. This charger should not be used by persons without adequate training or knowledge.