The Walther Pro HL17 focusable head torch has a maximum output of 405 lumens when using two CR123A lithium metal non-rechargeable batteries.
This headlamp can also be powered by 1 x 18650 lithium-ion rechargeable battery for longer run-times, by 3 x AAA NiMH rechargeable batteries or by 3 x AAA alkaline batteries.
The HL17 features a 90° adjustable head, useful for getting the perfect angle while undertaking a particular task, or you can remove the strap and set it down on a table as an area light. A sliding focus is also available, with the head of the torch providing spot to flood focus.
The soft press side switch button cycles through the three brightness settings of 100%, 40% and 10 %. Holding down the button will activate strobe mode.
Beam adjustment system
Multiple battery options
Temperature protection system
Adjustable and washable headband
Using 2 x CR123A lithium metal batteries:
High: 405 lumens; 1 hour, 50 minutes run-time; 10 m beam range
Mid: 165 lumens; 4 hours run-time; 110 m beam range
Low: 40 lumens; 9 hours run-time; 70 m beam range
Using 1 x 18650 lithium-ion battery:
High: 330 lumens; 3 hours, 30 minutes run-time; 160 m beam range
Mid: 130 lumens; 7 hours, 10 minutes run-time; 110 m beam range
Low: 35 lumens; 14 hours run-time; 55 m beam range
Using 3 x AAA alkaline batteries:
High: 235 lumens; 3 hours, 30 minutes run-time; 140 m beam range
Mid: 95 lumens; 9 hours run-time; 90 m beam range
Low: 25 lumens; 18 hours run-time; 45 m beam range
The above parameters are tested to ANSI FL1 standards and may vary between torches, environmental factors and personal usage habits.
Battery Charger Information:
If you are going to use AAA NiMH rechargeable batteries or a 18650 lithium-ion battery then you will also need to purchase them and a suitable battery charger if you do not already have them, please see the related product side panel to the right of the screen.
CR123A lithium primary battery cells and AAA alkaline batteries are NOT rechargeable. For suitable replacements please see the related products panel to the right of the screen.
Type: LED head torch
Operating Modes: High / Mid / Low / Strobe
Luminous Flux: Up to 405 lumens (using CR123A batteries)
Lamp Type: Cree XP-G LED
Reflector: Smooth aluminium
Focus: Spot to flood
Beam Range: Up to 180 m (using CR123A batteries)
Batteries Required: 3 x AAA alkaline/NiMH or 2 x CR123A or 1 x 18650
Burn Time: Up to 18 hours on low setting
Dimensions: 87 x 74 x 41 mm
Weight: 175 grams
Colours Available: Black
Body Material: Aircraft grade aluminium/reinforced synthetic material
Switch Type: Side switch
Impact Resistance: 2 m
Environmental: Water and resistant to IPX4 standards
Warranty: 2 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Walther Pro HL17 LED head torch x 1
Adjustable headband x 1
AAA battery adaptor x 1
AAA alkaline battery x 3
CR123A/18650 battery sleeve x 1
Manual x 1