The new Nitecore P10 features a streamlined and ergonomic design in conjunction with Nitecore's new metal lever switch (patented), that allows for instant access to strobe mode, even when the torch is turned off. Dual switches make it easy to operate all of the modes and functions with a single hand.
Three selectable modes of operation allow the user to define the user interface:
Tactical Mode: Strobe / High
Law Enforcement Mode: Strobe / High / Low
General Mode: Strobe / High / Medium / Low
Once the desired operation mode has been set the P10's intelligent memory keeps this stored so you can be sure exactly how the light will behave in any given situation. A built in LED on the tail cap switch (patented) indicates the remaining battery voltage to ensure you know when the batteries are low on power.
Powered by one rechargeable 18650 lithium-ion battery or two non-rechargeable CR123A primary cells, the P10 uses a premium Cree XM-L2 (T6) LED with a maximum output of 800 lumens.
Includes quality holster, CR123A battery magazine, removable pocket clip, removable tactical ring, lanyard and spare o-ring.
Additional Product Features
Premium CREE XM-L2 (T6) LED
Dual-switch tail cap designed for tactical use and easy application
Strobe readyTM button for quick access to Strobe mode (patented)
Three selectable modes brings flexibility in operation
Integrated LEDs on tail switch to indicate remaining battery power (patented)
Anti-rolling design to provide a firm grip
Titanium steel clip included
Using one Nitecore 2600 mAh lithium-ion rechargeable battery:
High: 800 lumens; 4 hours, 30 minutes run-time
Mid: 290 lumens; 9 hours run-time
Low: 40 lumens; 26 hours run-time
Using two Nitecore CR123A lithium metal primary single-use batteries:
High: 800 lumens; 1 hour, 30 minutes run-time
Mid: 400 lumens; 2 hours, 30 minutes run-time
Low: 70 lumens; 10 hours, 30 minutes run-time
Tested to ANSI/NEMA FL1 standards.
Note: As this is a high drain device, when in medium and high mode, the P10 will automatically reduce the output after 3 minutes of continuous use to prevent overheating.
Battery Charger Information:
If you are going to use a 18650 lithium-ion rechargeable battery then you will also need to purchase a suitable battery charger if you do not already have one, please see the related product side panel to the right of the screen.
CR123A lithium primary battery cells are NOT rechargeable. For suitable replacements please see the related products panel to the right of the screen.
Type: Professional easy carry LED torch
Operating Modes: High / Medium / Low / Strobe
Luminous Flux: From 40 to 800 lumens
Lamp Type: Cree XM-L2 (T6) LED
Reflector: Precision digital optics technology provides extreme reflector performance
Beam Range: 193 m
Batteries Required: 2 x CR123A lithium metal or 1 x 18650 lithium-ion
Run Time: Battery dependent, please see information above
Overall Length: 134 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Weight: 82 grams (excluding batteries)
Colours Available: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear glass lens with anti-scratch coating
Switch Type: Dual switch
In-Built Technology: Constant current
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Nitecore P10 LED torch x 1
Clip x 1
Holster x 1
Lanyard x 1
Spare O-ring x 1
Tactical ring x 1
Spare rubber switch cap x 1
CR123A battery magazine x 1
Battery (select from options above)
Manual x 1