The Nitecore MT20A is a new addition to the MT range for 2015 and features a Cree XP-G2 R5 LED, with a maximum output of 360 lumens.
Powered by two AA alkaline primary cells or two AA NiMH rechargeable cells, the MT20A has a beam range of up to 160 metres.
Featuring a tactical tail switch with momentary illumination, the MT20A has five brightness levels, three special modes, two red modes and a red low battery indicator.
The brightness level are selected using the dual side switch 'step up' and 'step down' buttons. They also provide instant access to red light mode and strobe.
Useful design features include a removable and reversible pocket clip, anti-roll head and tail stand capability for use as a candle.
Precision digital optics technology provides extreme reflector performance
Memory function; remembers the last used brightness setting
Red LED provides constant on and flashing
Battery voltage indicator
Toughened ultra-clear mineral glass with anti-reflective coating
Reverse polarity protection
Stainless steel, titanium plated pocket clip
Tail stand capability
Turbo: 360 lumens; 1 hour, 45 minutes run-time
High: 240 lumens; 2 hours, 15 minutes run-time
Mid: 120 lumens; 5 hours, 45 minutes run-time
Low: 17 lumens; 24 hours run-time
Ultra Low: 1 lumen; 180 hours run-time
Note: Tested to ANSI/NEMA FL1 standards using two 2500 mAh AA NiMH batteries. The data is approximate and may vary between torches, batteries and environments.
Battery Charger Information:
If you are going to use AA NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one, please see the related product side panel to the right of the screen.
AA alkaline primary battery cells are NOT rechargeable. For suitable replacements please see the related products panel to the right of the screen.
Type: Hand held LED torch
Operating Modes: Turbo / High / Mid / Low / Ultra Low / Red / Red Flash / Strobe / SOS
Luminous Flux: Up to 360 lumens
Lamp Type: Cree XP-G2 R5 LED
Focus: Fixed focus
Reflector System: Smooth reflector
Beam Range: 160 m
Batteries Required: 2 x AA alkaline or 2 x AA NiMH
Run Time: Up to 180 hours
Overall Length: 155 mm
Head Diameter: 25.4 mm
Tail Diameter: 21.2 mm
Weight: 75 grams (excluding batteries)
Body Colour: Black
Body Material: Aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Clicky tail switch and dual side buttons
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MT20A LED torch x 1
Lanyard x 1
Holster x 1
Pocket clip x 1
Spare switch boot x 1
Spare O-ring x 2
Manuals x 1
AA battery x 2 (see options above)