The Nitecore MH2A is part of the new Multi-Task Hybrid series of lights, which feature a micro-USB charging port and this model includes a free dedicated Nitecore NL1427 rechargeable battery.
Simply plug the supplied charging lead into the USB port, without the need to remove the battery or purchase a separate charger, the MH2A can also be powered by two AA alkaline battery cells.
The MH2A has four brightness levels plus strobe and SOS flashing modes.
With the head in the tightened position the light will activate in turbo mode and with the head slightly loosened the light will cycle through the other three brightness levels and two flashing modes, these three levels also have a memory function remembering the last mode used.
Additional Product Features
Four lighting modes available as follows:
Turbo: 600 lumens, 1 hour 15 minutes run-time
High: 233 lumens, 2 hours 30 minutes run-time
Mid: 80 lumens, 7 hours 30 minutes run-time
Low: 22 lumens, 26 hours run-time
Note: Accurate ANSI performance numbers indicate real world light output and run times when using a dedicated Nitecore NL1427 rechargeable battery lithium-ion rechargeable battery cell. The data is approximate and may vary between torches, batteries and environments.
Charging: A USB charging cable is included with this product, for a suitable UK mains adaptor or car charger adaptor please see the related products panel to the right of the screen.
Type: Professional hand held LED torch
Operating Modes: 22 lumen / 80 lumen / 233 lumen / 600 lumen
Luminous Flux: From 22 to 600 lumens
Lamp Type: Cree XM-L U2 LED
Focus: Fixed focus
Reflector System: Aluminium reflector
Beam Range: 135 m
Batteries Required: 1 x Nitecore NL1427 rechargeable battery
Energy Management: High efficiency regulation circuit
Run Time: Up to 26 hours
Overall Length: 176 mm
Head Diameter: 25.5 mm
Barrel Diameter: 21.5 mm
Weight: 86 grams (excluding batteries)
Colours Available: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodized
Lens: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: End cap - push button
In-Built Technology: Intelligent memory circuit
Other Technology: Built-in advanced power management circuit
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MH2A LED torch x 1
Holster x 1
Lanyard x 1
Spare switch boot x 1
Spare O-ring x 2
Pocket clip x 1
USB charge cable x 1
Nitecore NL1427 rechargeable lithium-ion battery x 1
Manual x 1