The Nitecore TM26GT is a compact rechargeable searchlight with a maximum output of 3500 lumens using four Cree XP-L HI V3 LEDs.
The TM26GT features an intelligent charging circuit with status detection, that charges four 18650 lithium-ion batteries within the torch using the supplied UK mains adaptor, simply plug the charger directly into the charging port.
An integrated OLED display automatically activates when the torch is turned on and allows the user to quickly see the lumen output, brightness mode, battery status, approximate run-time, battery voltage and even the temperature of the torch. It will also indicate when charging is in progress / complete.
After a few seconds the display will turn off, but it can be reactivated with the OLED display button and cycled through with subsequent presses.
The patented single button two-stage switch design offers easy one handed operation and will access either daily mode or search mode depending on the depth the switch is pressed down.
Pressing the switch partway down from off will enter daily mode. In this mode ultra-low, low, mid, high can be cycled through and the last used brightness will be remembered when the torch is turned off. Turbo can be accessed by pressing the switch partway down and holding.
Search mode is accessed by fully pressing the switch down from off. In this mode only high and turbo are available with a partway press to switch between them and there is no last used memory function.
Note: Always read the operating instructions before first use.
Lockout mode - press and hold switch for more than 1 second
Capable of using 1 x 18650 or 2 x CR123A batteries in emergency situations
Intelligent charging circuit with voltage detection charges safely and rapidly
Integrated power indicator light displays remaining battery power (patented)
Power indicator secondary function displays battery voltage (accurate to 0.1 V)
Stainless steel bezel ring protects the core components from damage
Thermal protection circuit prevents overheating
Using 4 x 18650 3400 mAh lithium-ion batteries:
Turbo: 3500 lumens, 1 hour, 15 minutes run-time*
High: 1700 lumens, 3 hours, 15 minutes run-time
Mid: 540 lumens, 9 hours, 45 minutes run-time
Low: 95 lumens, 48 hours run-time
Ultra-low: 3 lumens, 1000 hours run-time
Using 8 x CR123A 1700 mAh lithium metal batteries:
Turbo: 3500 lumens, 1 hour run-time*
High: 1700 lumens, 2 hours, 45 minutes run-time
Mid: 540 lumens, 6 hours, 30 minutes run-time
Low: 95 lumens, 32 hours run-time
Ultra-low: 3 lumens, 750 hours run-time
Test to ANSI/NEMA FL1 standards. The data may vary during real world use due to battery type, individual usage habits and environmental factors.
Note: *The TM26GT has a thermal protection circuit that will automatically reduce the lumen output if the torch reaches 60°C, therefore this is an accumulated run-time. NEVER attempt to cool the torch by submerging it in water as this could result in irreparable water damage.
Battery Charger Information:
If you are going to use 18650 lithium-ion rechargeable battery cells then you can use the included UK mains charger.
CR123A lithium primary battery cells are NOT rechargeable. Please DO NOT use the charging cable with CR123A batteries.
Type: Search and rescue LED torch
Operating Modes: Turbo / High / Mid / Low / Ultra-low / Strobe / SOS / Location
Luminous Flux: Up to 3500 lumens
Lamp Type: Cree XP-L HI V3 LED x 4
Beam Range: 704 m
Batteries Required: 8 x CR123A or 4 x 18650 lithium-ion
Run Time: Up to 1000 hours (Ultra low setting)
Overall Length: 142 mm
Head Diameter: 68 mm
Barrel Diameter: 50 mm
Weight: 442 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear glass lens with anti-reflective coating
Lens: Aluminium reflector ensures a smooth and powerful beam
Switch Type: Side mounted push button
In-built Protection: Thermal protection circuit prevents overheating
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and includes:
Nitecore TM26GT LED torch x 1
Spare O-ring x 1
Spare charging port cover x 1
Wrist lanyard x 1
Heavy duty belt holster x 1
UK mains charger x 1
Batteries (see options above)
Manual x 1