The Fenix TK32 2016 is a re-design of the previous TK32 and boasts an improved white output of 1000 lumens, as well as red and green outputs.
This combination of LEDs enables you to select a choice of four white brightness levels from the primary Cree XP-L HI V3 LED, or two red brightness levels and two green brightness levels from the secondary XQ-E LEDs.
A dual tailcap switch system puts all the lighting controls under your thumb for simple one handed operation. The circular tactical switch operates momentary and on/off and oval function switch selects outputs.
With the light on, the oval function switch will cycle through the brightness settings of low, mid, high and turbo. Holding down the function switch will access the coloured outputs, with red high being default. Each click of the function button will then cycle through red high, red low, green high and green low. Holding the function button down again will return to the last used white brightness setting.
The smooth reflector combined with the Cree LED provides an impressive beam range of 422 metres when the torch is in turbo setting.
The Fenix TK32 2016 is a compact, high output torch which can be powered by two CR123A lithium metal batteries (non-rechargeable) or one 18650 lithium ion rechargeable battery.
White, red and green light outputs
Digitally regulated output, maintains constant brightness
Low voltage warning function to remind users of low power
Remembers last white brightness level used
Built-in overheat protection
Low: 8 lumens; 170 hours run-time; 40 m beam range
Mid: 100 lumens; 15 hours, 25 minutes run-time; 138 m beam range
High: 350 lumens; 4 hours, 45 minutes run-time; 245 m beam range
Turbo: 1000 lumens; 1 hour, 50 minutes run-time*; 422 m beam range
Red High: 105 lumens; 4 hours, 15 minutes run-time; 65 m beam range
Red Low: 15 lumens; 65 hours run-time; 23 m beam range
Green High: 165 lumens; 5 hours, 30 minutes run-time; 105 m beam range
Green Low: 30 lumens; 40 hours run-time; 45 m beam range
Tested to ANSI / PLATO FL1 standard using Fenix 18650 ARB-L18 3500 mAh rechargeable battery.
Note: *The over-heat protection will automatically drop the brightness level if the internal temperature reaches 65°C or above in order to protect the LED, therefore the run-time is an accumulated time.
Battery Charger Information:
If you are going to use 18650 Li-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one, please see the related product side panel to the right of the screen.
CR123A lithium primary battery cells are NOT rechargeable. For suitable replacements please see the related products panel to the right of the screen.
Type: Tactical hand held torch
Operating Modes: Low / Mid / High / Turbo / Red / Green
Luminous Flux: Up to 1000 lumens
Lamp Type: 3 x Cree XP-L HI V3 LED
Beam Range: 422 m
Batteries Required: 2 x CR123A (lithium) or 1 x 18650 (lithium-ion)
Run Time: Up to 170 hours (low setting)
Overall Length: 159 mm
Head Diameter: 52 mm
Barrel Diameter: 25.4 mm
Weight: 175 grams (excluding batteries)
Body Colour: Black
Body Material: Made of durable aircraft-grade aluminium
Body Finish: Premium type III hard-anodised anti-abrasive finish
Window Type: Toughened ultra-clear glass lens with anti-reflective coating
Switch Type: Dual button switch in the tail cap
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix TK32 2016 LED torch x 1
Lanyard x 1
Holster x 1
Spare O-ring x 1
Batteries (see options above)
Manual x 1